Endorfy Navis F360 CPU Cooler

Product Overview

The Endorfy Navis F360 is a CPU cooler engineered to provide optimal cooling performance for computer processors. It is designed for reliability and ease of installation.

Connectors

The cooler features the following connectors for system integration:

• CPU_FAN / CPU_OPT PWM 4-PIN: This connector is used to connect the cooler's fan(s) to the motherboard's CPU fan header, allowing for speed control based on CPU temperature.
• SATA POWER: This connector is used to draw power directly from the Power Supply Unit (PSU) for the cooler's pump and fan(s).

Diagram Description: The connection diagram illustrates how to connect the cooler's cables. The 4-pin PWM connector plugs into the motherboard's CPU fan header, and the SATA power connector plugs into a corresponding port on the PSU.

CPU Compatibility and Installation

The Endorfy Navis F360 supports a wide range of CPU sockets. Installation typically involves attaching a mounting bracket to the motherboard, applying thermal paste, and securing the pump unit.

AMD Sockets

Compatibility: AMD AM5, AM4.

Diagram Description (AMD): The AMD installation diagram shows the pump unit and its mounting hardware. It details how to attach the necessary brackets and screws (labeled A, B, C, D) to the motherboard for securing the pump unit. The pump unit has corresponding alignment points.

Intel Sockets

Compatibility: Intel LGA1200, LGA1150, LGA1151, LGA1155, LGA1156.

Diagram Description (Intel LGA): The Intel installation diagram illustrates the mounting process for standard Intel LGA sockets. A specific mounting bracket is attached to the motherboard using screws. The pump unit is then secured to this bracket. Orientation markers (A, B, C, D) are present on the bracket and pump for correct alignment. The diagram also indicates slight angular adjustments for optimal contact, shown as -3° and 10°.

Intel HEDT Sockets

Compatibility: Intel HEDT LGA2066, LGA2011-3, LGA2011 (SQUARE ILM).

Diagram Description (Intel HEDT): This diagram details the installation for Intel High-End Desktop (HEDT) sockets. It shows the pump unit and its mounting hardware. A bracket is secured to the motherboard, and the pump unit is attached to this bracket using screws. Orientation markers (A, B, C, D) are provided for correct placement.

Safety Instructions

Please read the following safety instructions carefully before using the Endorfy Navis F360 CPU Cooler:

• Use the product only as intended. Improper use can damage the product and pose a health risk to the user.
• Ensure the product is in good working order before using it.
• This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.
• Do not install and use the device within reach of children.
• To prevent damage from condensation, allow the device to warm up to ambient temperature before use.
• Clean only with a dry, clean cloth. Do not handle with wet hands.
• No user-serviceable components inside. Return to an authorized service center for repairs.
• Opening the device or modifying it will void the warranty.
• Do not use the product near liquids or in places where it may be directly exposed to liquids. If the device comes into contact with any liquids, immediately disconnect it from the power source.
• The warranty does not cover mechanical damage to the product.
• If the device malfunctions, disconnect from the power source immediately and contact ENDORFY technical support.
• Do not discard electrical and electronic equipment together with other household waste.
• The end user is responsible for correct disposal of unnecessary or faulty electrical equipment by returning it to the collection point or to the seller. Contact local authorities or the store where you purchased the product for additional information.
• Make sure that the metal parts of the cooling system are not in contact with any expansion cards or components on the motherboard.

[Recycling Symbol] This symbol indicates that, according to applicable regulations, this product and its battery (if included) should not be disposed of with other household waste. At the end of its life, the product should be taken to a special collection point designated by the relevant local authorities. The separate collection and recycling of products and batteries helps to save natural resources and ensures that the recycling process is safe for human health and the environment.