Marvel Undercounter Refrigeration

Important Safety Instructions

Warnings and safety instructions in this guide are not exhaustive. Use common sense, caution, and care when installing, maintaining, or operating this appliance.

Recognize Safety Symbols, Words, and Labels

Welcome to the Marvel Experience

Thank you for choosing a quality American-built Marvel product. This guide is intended to help you install and maintain your new Marvel undercounter model to protect and prolong its lifetime.

For questions, contact Technical Support at (616) 754-5601.

Got a Marvelous Design?

Share photos of your Marvel product in its new home at marketing@marvelrefrigeration.com to potentially be featured on the Marvel website and social media.

Unpacking Your Appliance

Remove Interior Packaging

Your appliance is packed with securely fastened parts to prevent damage during shipment. Remove all internal packing materials and tape. The owner's manual, warranty registration card, and accessories are shipped inside the product in a plastic bag.

Important

Keep your carton and packaging until the appliance has been thoroughly inspected and found to be in good condition. The packaging is needed as proof of damage in transit. Dispose of all items responsibly afterwards.

Appliance Handling After Transit

If the appliance was shipped, handled, or stored in other than an upright position, allow it to sit upright for at least 24 hours before plugging in. This ensures oil returns to the compressor. Plugging it in immediately may cause damage to internal parts.

Note to Customer
The merchandise was inspected before shipment. Responsibility for safe delivery is assumed by the retailer. Claims for loss or damage sustained in transit must be made to the retailer. Do not return damaged merchandise to the manufacturer; file the claim with the retailer.

Electrical

Electrical Connection

A grounded 115 volt, 15 amp dedicated circuit is required. The product has a three-pronged, grounded plug and must be connected to a grounding-type receptacle in accordance with the National Electrical Code and local codes. The customer is responsible for providing a proper grounding-type receptacle if the circuit lacks one. The third ground prong must not be cut or removed.

Ground Fault Circuit Interrupters (GFCI)

GFCIs can cause nuisance tripping, shutting down the appliance. They are generally not used on circuits with equipment that must run unattended, unless required by local building codes.

Installing Your Appliance

Select Location

Choose a location out of direct sunlight and away from heat sources for peak performance. The recommended installation temperature range is 55 to 100°F (13 to 38°C).

Cabinet Clearance

Ventilation is required from the bottom front of the appliance. Keep this area clear of obstructions. Adjacent cabinets can be installed as long as the front grille remains unobstructed. Marvel Professional models with articulated hinges are for built-in applications only.

Stacking Kit Warning

An optional stacking kit is required for 24" wide models to stack products. Failure to use a stacking kit could result in personal injury. Contact your dealer or Marvel customer service at 616-754-5601. 15" wide models should not be stacked due to safety concerns.

Leveling Legs

Adjust the front and rear leveling legs to ensure the unit is firmly positioned and level side-to-side and front-to-back. The appliance height can be adjusted by turning the legs counter-clockwise (CCW) to raise and clockwise (CW) to lower. Protect the floor when adjusting. With assistance, lean the appliance back to access front legs, then tilt forward for rear legs. Check for levelness on a flat surface.

Front Grille

Do not obstruct the front grille. The openings allow airflow for the condenser heat exchanger. Restricted airflow increases energy usage and reduces cooling capacity. Keep grille openings clean. Marvel does not recommend custom grilles as they may restrict airflow.

Front Grille Adjustment

Loosen the front grille screws to adjust the grille height. Tighten the screws once the desired height is achieved.

Door Reversal

Tools Needed

• 1/8" Hex Key
• 5/32" Hex Key
• Phillips Screwdriver

Instructions

1. Open the door. Steady the door and remove the Hinge Pin from the Upper Hinge using the 1/8" Hex Key. Slowly remove the door from the Upper Hinge and lift it off the Lower Hinge.
2. Using a Phillips Screwdriver, remove the 6 screws from both the Upper and Lower Hinges. Save these screws.
3. Remove the Bushing Screw and Hinge Pin Screw from the unit using a Phillips Screwdriver. Save these screws.
4. On the Bottom Hinge, reattach the Bushing Screw and Hinge Pin Screw to the opposite side.
5. Using a 5/32" Hex Key, remove the Upper and Lower Hinge Brackets from the door, saving all components. Remove black plugs from the opposite side of the door. Flip the Upper Hinge Bracket and reattach the Hinge Bushing and screw into place on the opposite side of the door. Remove the Cam Closer from the Lower-Hinge Bracket and attach it to the opposite side.
6. Remove the Toe Kick from the door and attach it to the opposite side.
7. Reattach the Upper and Lower Hinges and Hinge Brackets to the opposite sides. Then install the door.

Using Your Electronic Control

Control Function Guide

Door Alert Notification

When the door is left open for more than 30 minutes:

• A tone will sound every minute.
• "dr" will appear in the display.
• Close the door to silence the alert and reset.

First Use

Initial startup requires no adjustments. When plugged in, the unit operates with factory default settings. If turned off during installation, press [ON/OFF button] to switch on. Press [ON/OFF button] to turn off.

Note on Temperature Display

Displayed temperature reflects actual internal temperature. If it differs from the selected temperature, the unit is adjusting. Time to reach set point varies based on ambient temperature, product load, and door openings. Allow the unit to reach set points before loading.

BrightShield™ Technology

This model includes BrightShield™ with Vyv™ Antimicrobial Light Technology.

BrightShield™ Benefits:

• Kills* and prevents the growth of viruses, bacteria, fungi, yeasts, mold, and mildew.
• Provides continuous antimicrobial action to keep surfaces clean.
• Approved for continuous use around people, pets, & plants.
• Reduces odors caused by bacteria, fungi, yeasts, mold, and mildew.
• Creates a cleaner environment for food, beverages, & ice.

*Testing results: 97.12% reduction in MS2 bacteriophage in 8 hours; 98.45% reduction in SARS-CoV-2 in 4 hours; 90%+ reduction in MRSA E. coli in 24 hours on hard surfaces. Results may vary based on light exposure. Vyv™ technology is not a substitute for manual cleaning and disinfection.

BrightShield™ is most effective when used continuously. The unit is factory-set to use BrightShield™ lighting when the door is closed and standard bright white when open. Refer to Control Operations for details.

For more information about BrightShield™, visit www.marvelrefrigeration.com.

For more information about Vyv™ Antimicrobial Light Technology, visit www.vyv.tech.

Care and Cleaning

Front Grille

Ensure nothing obstructs the required airflow openings in the front of the cabinet. Brush or vacuum lint and dirt from the front grille area at least once or twice a year (see page 8).

Cabinet

The painted cabinet can be washed with mild soap and water, then rinsed with clear water. Never use abrasive scouring cleaners.

Interior

Wash the interior compartment with mild soap and water. Do not use abrasive cleaners, solvents, polish cleaners, or undiluted detergent.

Care of Appliance

1. Avoid leaning on the door to prevent bending hinges or tipping the appliance.
2. Exercise caution when sweeping, vacuuming, or mopping near the front of the appliance to avoid damaging the grille.
3. Periodically clean the interior as needed.
4. Periodically check and/or clean the front grille as needed.

In the Event of a Power Failure

If a power failure occurs, try to correct it as soon as possible. Minimize door openings while the power is off to avoid affecting the appliance's temperature.

Light Assembly Replacement

All models use an LED for interior illumination. While reliable, if the LED fails, contact a qualified service technician for replacement.

Household Product Warranty

Marvel Refrigeration (Marvel) Limited Warranty

One Year Limited Parts & Labor Warranty

Covers parts and labor for repairs or replacements of defective materials or workmanship for one year from the original purchase date. Material cosmetic defects are covered for 60 days. Service must be performed by a Marvel factory authorized servicer during normal business hours.

Two Year Limited Parts & Labor Warranty (Marvel Professional Products)

Covers parts and labor for repairs or replacements of defective materials or workmanship for two years from the original purchase date. Material cosmetic defects are covered for 60 days. Service must be performed by a Marvel factory authorized servicer during normal business hours.

Available Third Year Limited Warranty (Marvel Professional Products)

For designated Marvel Professional products, an optional one-year extension of the two-year warranty is available free of charge. Register your product with Marvel within 60 days of purchase at marvelrefrigeration.com and provide proof of purchase.

Limited Five Year Sealed System Warranty

Covers repairs or replacements (labor not included) for defective compressor, condenser, evaporator, drier, and connecting tubing for five years from the original purchase date. Service must be performed by a Marvel factory authorized servicer during normal business hours.

Warranty Terms

Warranties apply to products installed in the United States and Canada. They do not cover defects caused by negligence, accident, improper use, maintenance, installation, service, repair, acts of God, fire, flood, or other natural disasters. The product must be installed, operated, and maintained according to the Marvel User Guide.

Marvel is not responsible for consequential or incidental damages. Some states may not allow these limitations.

Implied warranties are limited to the duration of these express warranties, up to five years for sealed system parts. Some states do not allow limitations on implied warranty duration.

• Warranties apply only to the original purchaser and are non-transferable.
• Warranties cover products for normal residential use only.
• Units for outdoor use must be designed for outdoor use by model and serial number.
• Replacement water filters, light bulbs, and other consumable parts are not covered.
• Marvel's obligation is limited to four years after the shipment date.
• In-home instruction on product use is not covered.
• Loss of food, beverages, and medicine is not covered.
• If Marvel factory authorized service is unavailable in your area, you may be responsible for trip charges or transporting the unit to a service location.
• Units purchased as floor displays or reconditioned units are covered by a limited one-year warranty with no cosmetic defect coverage.
• Signal issues related to Wi-Fi connectivity are not covered.

For Parts and Service Assistance

Contact Marvel Refrigeration:

• Website: www.marvelrefrigeration.com
• Email: techsupport@marvelrefrigeration.com
• Phone: +616.754.5601
• Address: 1260 E. Van Deinse St., Greenville, MI 48838

All specifications and product designs are subject to change without notice.