Hyundai H-100 Special Vehicle

Freezer Truck

The H-100 freezer trucks are optimized for the quality transportation of frozen goods, ensuring maximum satisfaction and profit.

Image: A white Hyundai H-100 High-Roof Freezer Truck is shown parked outdoors with a city skyline in the background.

Image: A white Hyundai H-100 Low-Roof Freezer Truck and a High-Roof Freezer Truck are shown side-by-side.

Dimensions and Features

Diagram illustrating dimensions for low and high freezer trucks. Key dimensions include cargo room height.

• EPDM Gasket: Rear and side door EPDM rubber gaskets are applied for improved durability and airtightness.
• Stainless Steel Floor: Corrosion-resistant stainless steel floor is applied.

Image: A diagram shows a side view of a low freezer truck and a high freezer truck, with dimensions labeled for cargo room height (1,190mm for low, 1,450mm for high) and overall height. EPDM rubber gasket is indicated.

H-100 Freezer Trucks' Advantages

• Spoiler's improvement in aerodynamic performance and design: +7.8% improvement in aerodynamic performance along with the application of Hyundai Motors' radiator grille design.
• Corrosion-resistant stainless steel floor is applied.

Specifications

Note: Freezer temperature may vary depending on cargo and outdoor environment (temperature, driving environment, etc.).

Image: Close-up of the stainless steel angle floor (SUS304) inside a cargo compartment.

Components

Diagram showing the location of the freezer compressor and freezer condenser on the truck. Images display different types of freezer condensers (low-roof and standard) and internal cargo compartment views with evaporators and LED room lamps.

• Freezer compressor
• Freezer condenser (low-roof and standard)
• Evaporator (freezer truck)
• LED room lamp
• Cargo compartment (low freezer truck)
• Cargo compartment (freezer truck)

Refrigerator Truck

The H-100 refrigerator truck boasts optimal efficiency for food transportation that does not require freezing.

Image: A white Hyundai H-100 High-roof refrigerator truck is shown parked in an orchard setting.

Dimensions and Features

Diagram illustrating dimensions for refrigerator trucks, including cargo room height (1,500mm for standard, 1,700mm for high-roof). Text describes EPDM rubber gaskets.

• EPDM Gasket: Rear and side door EPDM rubber gaskets are applied for improved durability and airtightness.

Note: The image of the condenser's radiator grille may not be an exact representation of the product. Cargo space dimensions are based on the interior of the cargo compartment.

Special Features

• Corrosion-resistant stainless steel floor is applied to the cargo room.
• A wide rear step is applied for increased convenience of getting in and out of the cargo room.
• The cargo room temperature can be set up to -5°C.

Image: Interior view of a refrigerator truck cargo room, highlighting the SUS304 stainless steel flooring.

Image: An LED room lamp, described as having superior illuminance and semi-permanent lifespans.

Specifications

Built-in Truck / Built-in Top Power Gate

The H-100 built-in trucks protect and keep products safe from direct sunlight and a variety of weather conditions such as snow, rain, wind.

Image: Two Hyundai H-100 trucks are shown. One is a high-roof built-in truck, and the other is a built-in top power gate truck.

Dimensions and Features

Diagrams show dimensions for low-roof and high-roof built-in trucks. Key dimensions include cargo room height (1,270mm for low-roof, 1,580mm for high-roof).

Images illustrate the order of powergate operation in four steps.

Note: The image of the rear step may not be an exact representation of the product. Cargo space dimensions are based on the interior of the cargo compartment.

Special Features

Low Built-in Truck Features

• Low-roof built-in trucks can transport goods to buildings with limited overhead height.

High Built-in Truck Features

• The high-roof built-in trucks, which are 220mm higher than the standard built-in trucks, allow more transportation of bulky goods.

Built-in Top Power Gate Features

• The vehicle is lighter in weight by applying a dual-purpose rear door that is also utilized as a lift gate.
• High-strength aluminum extrusion plate is applied.
• A dual-type hydraulic cylinder power system is applied for easier opening, closing, raising, and lowering.

Specifications

Image: A close-up view of the dual-purpose rear door and lift gate mechanism, showing dimensions 1,250mm and 1,680mm.

Image: A truck equipped with a turn-in type lift system, with a note about allowed load: 600 kg, from the center of the plate.

H-100 Special Vehicle Features

A collection of images showcasing various features of the H-100 special vehicles.

• Reflector headlamp: Image of the truck's headlamp.
• Fog lamp: Image of the truck's fog lamp.
• Folding heated outside mirror: Image of a side mirror with heating elements visible.
• Rear high-mounted stop lamp: Image of the stop lamp mounted high on the rear of the truck.
• Premium rear step: Image of a premium rear step with a yellow safety strip.
• Wide side step: Image of a wide side step for easier access.
• Conventional side door: Image showing a conventional side door on the cargo compartment.
• Sliding side door (optional / LHD only): Image showing a sliding side door.

Images showcasing additional components and options:

• Freezer condenser, low-roof: Image of the condenser unit on the roof.
• Freezer condenser, standard: Image of the condenser unit on the front grille area.
• Refrigerator condenser: Image of the condenser unit.
• LED room lamp: Image of an LED lamp fixture.
• Cargo room and compressed wood flooring (built-in, wingbody trucks): Image of the cargo interior with wood flooring.
• Side door thermal curtains (optional): Image showing thermal curtains inside the cargo.
• Rear door thermal curtains (optional): Image showing thermal curtains at the rear door.
• Reverse parking assistance system: Image of the rear of the truck, likely showing sensors or camera.

Note: The images shown above may not be an exact representation of the product.

Wing Body

The wing body is a multifunctional truck that provides increased efficiency in loading and unloading of goods from both sides of the vehicle.

Image: A white Hyundai H-100 Wing Body truck is shown with its wing doors open.

Features and Specifications

Image: Rear view of the wing body truck showing the twin-swing doors opening up to 270 degrees.

Diagram indicating EPDM gasket on rear and side doors for improved durability and airtightness.

Specifications

Special Features

• Manual spring wing latch: The method of spring linkage reduces failure rate and allows for semi-permanent use.
• Loading and unloading convenience: The ability to open both sides enables integrated loading and unloading operations with forklifts, increasing the efficiency.
• Extruded aluminum side gate: Extruded aluminum is applied to the side doors for weight reduction and enhanced durability.
• Compressed wood flooring: Compressed wood flooring prevents deformation due to bending or temperature changes.

Images show:

• Expanded Polystyrene (EPS) panel wings (30t goldfoam EPS panels).
• LED room lamp.
• Simple and strong locks for wings.
• Large-capacity cargo compartment.

Power Gate / Transformer Power Gate

Images show Hyundai H-100 trucks equipped with power gates and transformer power gates. Steps 1-4 illustrate the operation of the power gate.

Power Gate / Transformer Power Gate Features

• The hydraulic power gate, powered by battery, is operable without starting the engine.
• The power gate is raised with a power unit but lowered by the weight of cargo, reducing battery consumption.
• Extra-large, foldable rear tailgate allows for loading of large-volume cargo.
• The power gate's vertical method of transfer provides stable operation.
• The vertical operation of the power gate can be done with a wireless remote control, while opening and closing of the rear tailgate is aided by a weightless auxiliary spring.
• Extruded aluminum component is applied to the transformer power gate for improved fuel efficiency.
• The cargo compartment of the transformer power gate's rear tailgate can be adjusted to first or second level.
• The transformer power gate, completed with compressed wood flooring, boasts excellent durability.
• The rear tailgate of the transformer power gate is manufactured with high-strength extruded aluminum.

Lifting Systems and Specifications

Diagrams show dimensions for power gate and transformer power gate systems. Key dimensions include lift panel size and overall dimensions.

Images illustrate:

• Extended lift panel (optional).
• Stainless steel motor box.
• Aluminum folding rear tailgate.
• Liftgate system: Hydraulic power unit is equipped for easy loading and unloading of heavy cargo (Allowed load: 600 kg).
• Vertical lift power system: The rear tailgate operates vertically on the support, allowing stable loading and unloading of heavy cargo.
• Lift plate: Extra-large rear tailgate allows for loading of large-volume cargo such as a piano or a large refrigerator.
• Turn-in type lift system: (Allowed load: 600 kg, from the center of the plate).

Power Gate Specifications

Transformer Power Gate Specifications

Multi-purpose Truck

Lift up/drop down doors have been applied to all sides of the cargo compartment (driver and passenger side, rear), providing convenience for event management agencies and mobile businesses.

Image: A white Hyundai H-100 Multi-purpose truck is shown with its doors open.

Special Features

• Opening and closing of the doors on all 3 sides (Driver and passenger side, rear).
• Installation of gas shock absorbers on doors for easy open and close.
• Application of compressed wood flooring.
• Panels available for use as billboards.

Specifications

Images show:

• LED room lamp: LED room lamps are applied for improved durability.
• Multi-purpose gate hook: The gate can be opened and secured in a position horizontal to the bottom side of the cargo compartment, adding convenience of utilizing cargo space.
• Compressed wood flooring: Prevents deformation due to bending or temperature changes.
• Insulated panel: Diagram showing an insulated panel construction with aluminum and insulator layers, 30mm thick.
• Lift up door (Driver side): Image of the driver side lift up door.
• Two-way foldable lift up door (Passenger side): Image of the passenger side foldable lift up door.
• Sturdy cargo room structure: Image showing the robust construction of the cargo room.
• Reverse parking assistance system: Image of the rear of the truck, likely showing sensors or camera.

Dump [4WD]

The H-100 dump truck, with its quick mobility and excellent ability to transport loose construction materials, is the best choice in heavy city traffic and narrow roads and alleys.

Image: A blue Hyundai H-100 Dump [4WD] truck is shown in a construction site setting with its dump bed raised.

Special Features

• 4X4 dump truck: Affordable prices and outstanding marketability broadened the range of customer choices.
• Electrical hydraulic dumping: Exhibits powerful dumping capabilities and composed operation performance.
• Locking differential (LD): Prevents rear wheel idling on slippery surfaces.

Specifications

Images show:

• Standout discharging: A high dump angle of 45 degrees, coupled with handy controls, ensures perfect discharging.
• Safe and powerful dump capabilities and maintenance work: The hinged bed is supported by a multi-level hydraulic cylinder to provide strong work capabilities, and by a safety bar to prevent safety-related accidents during underside maintenance.
• Dumping warning chime: A warning chime is heard while discharging to prevent safety accidents. (PAC button: emergency power off to prevent accidents during discharge).
• Electrical hydraulic unit: The electrical hydraulic unit, using the vehicle's battery power, allows discharging of loads without keeping the engine running.
• Simple dumping operation switch: Image of the dump operation switch.
• Standard hinged bed (3-way opening and closing of bed doors): Image of the standard hinged bed.
• One-body type hinged bed (1-way rear opening and closing of bed doors): Image of the one-body type hinged bed.

Comprehensive Specifications

Detailed specifications for various H-100 truck configurations.

Specifications by Truck Type (Page 1 of 2)

Note: Specifications are subject to change depending on the operational policies of each country.

Image: A line-up of trucks: Low freezer truck, Freezer truck, High freezer truck, Refrigerator truck, High refrigerator truck.

Specifications by Truck Type (Page 2 of 2)

Image: A line-up of trucks: Low built-in truck, Built-in truck, High built-in truck, Built-in top power gate, Wing Body, Multi-purpose truck, Transformer power gate, Power gate, Dump 4WD.