130 Internet store of autogoods
Phones: (044) 360-7-130, (050) 336-0-130, (063) 788-0-130, (067) 233-0-130, (068) 282-0-130
ICQ: 294-0-130, 597-0-130
SKYPE: km-130
Product Categories
- CAR RECEIVERS: Receivers, Media receivers and stations, Native receivers, CD/DVD changers, FM-modulators/USB adapters, Flash memory, Facia plates and adapters, Antennas, Accessories
- CAR AUDIO: Car audio speakers, Amplifiers, Subwoofers, Processors, Crossovers, Headphones, Accessories
- TRIP COMPUTERS: Universal computers, Model computers, Accessories
- GPS NAVIGATORS: Portable GPS, Built-in GPS, GPS modules, GPS trackers, Antennas for GPS navigators, Accessories
- VIDEO: DVR, TV sets and monitors, Car TV tuners, Cameras, Videomodules, Transcoders, Car TV antennas, Accessories
- SECURITY SYSTEMS: Car alarms, Bike alarms, Mechanical blockers, Immobilizers, Sensors, Accessories
- OPTIC AND LIGHT: Xenon, Bixenon, Lamps, LED, Stroboscopes, Optic and Headlights, Washers, Light, rain sensors, Accessories
- PARKTRONICS AND MIRRORS: Rear parktronics, Front parktronics, Combined parktronics, Rear-view mirrors, Accessories
- HEATING AND COOLING: Seat heaters, Mirrors heaters, Screen-wipers heaters, Engine heaters, Auto-refrigerators, Air conditioning units, Accessories
- TUNING: Vibro-isolation, Noise-isolation, Tint films, Accessories
- ACCESSORIES: Radar-detectors, Handsfree, Bluetooth, Windowlifters, Compressors, Beeps, loudspeakers, Measuring instruments, Cleaners, Carsits, Miscellaneous
- MOUNTING: Installation kits, Upholstery, Grilles, Tubes, Cable and wire, Tools, Miscellaneous
- POWER: Batteries, Converters, Start-charging equipment, Capacitors, Accessories
- MARINE AUDIO AND ELECTRONICS: Marine receivers, Marine audio speakers, Marine subwoofers, Marine amplifiers, Accessories
- CAR CARE PRODUCTS: Additives, Washer fluid, Care accessories, Car polish, Flavors, Adhesives and sealants
- LIQUID AND OIL: Motor oil, Transmission oil, Brake fluid, Antifreeze, Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in Kyiv and other cities, delivery by ground and postal services. Our experienced consultants will provide you with exhaustive information and help you to chose the very particular thing. We are waiting for you at the address http://130.com.ua.
Audison Thesis TH uno Amplifier
Technical Specifications
| Parameter | Value |
|---|
| Voltage | 11 ÷ 15 VDC |
| Idling current | 2 A |
| Idling current when off | 0.04 mA |
| Consumption @ 14.4 VDC (Max Musical Power) | 190 A |
| Remote In | 7 ÷ 15 VDC (1 mA) |
| Remote Out | 12 VDC (50 mA) |
| Fuse (AFS) | 150 A |
| Distortion - THD (1kHz @ 4 Ω) | 0.06 % |
| Bandwidth (-3 dB) | 5 ÷ 80k Hz |
| S/N ratio (weighted A @ 1 V) | 106 dBA |
| Damping factor (1 kHz@4Ω) | 300 |
| Pre-In sensitivity | 0.3 ÷ 5.0 VRMS |
| Pre-In impedance | 15 kΩ |
| Load impedance (MIN) | 1 Ω |
| Output power (RMS) @ 14.4 VDC, THD 1% (1 Ch x 4 Ω) | 880 W x 1 |
| Output power (RMS) @ 14.4 VDC, THD 1% (1 Ch x 2 Ω) | 1550 W x 1 |
| Output power (RMS) @ 14.4 VDC, THD 1% (1 Ch x 1 Ω) | 2020 W x 1 |
| Master / Slave Configuration Output power (RMS) @ 14.4 VDC; THD 1% (1 Ch x 4 Ω) | 3100 W x 1 |
CEA Specifications
| Parameter | Value |
|---|
| Output power @ 4 Ω, ≤ 1% THD+N, 14.4 Volts | 4040 W x 1 |
| SN ratio (ref. 1 W output) | 85 dBA |
ASC (Audison Status Controller) Functions
AMP IDentifications, DUAL POWER settings, ADLink inputs, ACLink digital bass, DRC controls, ACNet software, Status Display, Protections.
Inputs / Outputs
Input: PRE / SP-DIF OPTICAL (192 kHz - 24 bit) / ADLink
Output: PRE Bypass / ADLink
Filters
Filters: Removable module: (Hi-pass / Lo-pass / Band-pass 12 - 24dB) 32 steps 18 ÷ 7.5k Hz
Size
Dimensions (BxLxH): 259 x 67 x 510 mm (10"1/4 x 2"11/16 x 20"1/8)
Weight: 10.3 kg / 22.71 lb
System Design Example
The system design example illustrates connections for a 2-way front system with a subwoofer, using analog and digital inputs. An analog source connects via ADLink to a PRE IN input, and a digital source connects via OPTICAL IN to another PRE IN input. Both are routed to the amplifier's PRE OUT and ACLink outputs. A DRC (Digital Remote Control) is connected for functions like Status Monitor, Master Volume (Optical IN), Balance, Fader, Volume Subwoofer, Mute, and Source Select. The amplifier is identified with AMP IDs for A CH - FRONT TW, B CH - FRONT WF, and SUBWOOFER.
Audison Thesis TH due Amplifier
Technical Specifications
| Parameter | Value |
|---|
| Voltage | 11 ÷ 15 VDC |
| Idling current | 2.5 A |
| Idling current when off | 0.04 mA |
| Consumption @ 14.4 VDC (Max Musical Power) | 105 A |
| Remote In | 7 ÷ 15 VDC (1 mA) |
| Remote Out | 12 VDC (50 mA) |
| Fuse (AFS) | 100 A |
| Distortion - THD (1kHz@4Ω) | 0.06 % |
| Bandwidth (-3 dB) | 5 ÷ 80k Hz |
| S/N ratio (weighted A @1 V) | 106 dBA |
| Damping factor (1 kHz@4Ω) | 120 |
| Pre-In sensitivity | 0.3 ÷ 5.0 VRMS |
| Pre-In impedance | 15 kΩ |
| Load impedance (MIN) (2 Ch) | 1 Ω |
| Output power (RMS) @ 14.4 VDC, THD 1% (2 Ch x 4 Ω) | 310 W x 2 |
| Output power (RMS) @ 14.4 VDC, THD 1% (2 Ch x 2 Ω) | 520 W x 2 |
| Output power (RMS) @ 14.4 VDC, THD 1% (1 Ch x 4 Ω) | 670 W x 1 |
| Output power (RMS) @ 14.4 VDC, THD 1% (1 Ch x 2 Ω) | 1040 W x 1 |
| Output power (RMS) @ 14.4 VDC, THD 1% (1 Ch x 1 Ω) | 1340 W x 1 |
CEA Specifications
| Parameter | Value |
|---|
| Output power @ 4 Ω, ≤ 1% THD+N, 14.4 Volts | 250 W x 2 Ch |
| SN ratio (ref. 1 W output) | 85 dBA |
ASC (Audison Status Controller) Functions
AMP IDentifications, DUAL POWER settings, ADLink inputs, ACLink digital bass, DRC controls, ACNet software, Status Display, Protections.
Inputs / Outputs
Input: PRE / SP-DIF OPTICAL (192 kHz - 24 bit) / ADLink
Output: PRE Bypass / ADLink
Filters
Filters: Removable module: (Hi-pass / Lo-pass / Band-pass 12 - 24dB) 32 steps 18 ÷ 7.5k Hz
Size
Dimensions (BxLxH): 259 x 67 x 510 mm (10"1/4 x 2"11/16 x 20"1/8)
Weight: 10.3 kg / 22.71 lb
Crossover Modules and Dual Power Settings
The amplifier features adjustable crossover modules with frequency settings including SS1 (18-33 Hz), SW1 (42-75 Hz), SW2 (90-150 Hz), WM1 (180-330 Hz), WM2 (420-750 Hz), WT1 (880-1.5k Hz), WT2 (1.8-3.3k Hz), and MT1 (4.2-7.5k Hz). Dual Power settings allow configuration of SET (A-Class, Hi-AB Class, Hi-Current, Energy Saving), BIAS (Very High, High, Standard, Low), POWER (Normal, High), and MIN LOAD (4Ω, 4Ω, 4-2-1Ω, 4-2-1Ω).
System Design Example
The system design example illustrates connections for a 2-way front system with a subwoofer, using analog and digital inputs. An analog source connects via ADLink to a PRE IN input, and a digital source connects via OPTICAL IN to another PRE IN input. Both are routed to the amplifier's PRE OUT and ACLink outputs. A DRC (Digital Remote Control) is connected for functions like Status Monitor, Master Volume (Optical IN), Balance, Fader, Volume Subwoofer, Mute, and Source Select. The amplifier is identified with AMP IDs for FRONT and SUBWOOFER.
Audison Thesis TH quattro Amplifier
Technical Specifications
| Parameter | Value |
|---|
| Voltage | 11 ÷ 15 VDC |
| Idling current | 2.6 A |
| Idling current when off | 0.04 mA |
| Consumption @ 14.4 VDC (Max Musical Power) | 105 A |
| Remote In | 7 ÷ 15 VDC (1 mA) |
| Remote Out | 12 VDC (50 mA) |
| Fuse (AFS) | 100 A |
| Distortion - THD (1kHz @ 4 Ω) | 0.06 % |
| Bandwidth (-3 dB) | 5 ÷ 80k Hz |
| S/N ratio (weighted A @1 V) | 106 dBA |
| Damping factor (1 kHz@4Ω) | 110 |
| Pre-In sensitivity | 0.3 ÷ 5.0 VRMS |
| Pre-In impedance | 15 kΩ |
| Load impedance (MIN) (2 Ch) | 1 Ω |
| Output power (RMS) @ 14.4 VDC, THD 1% (4 Ch x 4 Ω) | 190 W x 4 |
| Output power (RMS) @ 14.4 VDC, THD 1% (4 Ch x 2 Ω) | 290 W x 4 |
| Output power (RMS) @ 14.4 VDC, THD 1% (4 Ch x 1 Ω) | 380 W x 4 |
| Output power (RMS) @ 14.4 VDC, THD 1% (3 Ch x 4 Ω) | 190 W x 2 + 580 W x 1 |
| Output power (RMS) @ 14.4 VDC, THD 1% (3 Ch x 2 Ω) | 290 W x 2 + 760 W x 1 |
| Output power (RMS) @ 14.4 VDC, THD 1% (2 Ch x 4 Ω) | 580 W x 2 |
| Output power (RMS) @ 14.4 VDC, THD 1% (2 Ch x 2 Ω) | 760 W x 2 |
CEA Specifications
| Parameter | Value |
|---|
| Output power @ 4 Ω, ≤ 1% THD+N, 14.4 Volts | 150 W x 4 Ch |
| SN ratio (ref. 1 W output) | 85 dBA |
ASC (Audison Status Controller) Functions
AMP IDentifications, DUAL POWER settings, ADLink inputs, ACLink digital bass, DRC controls, ACNet software, Status Display, Protections.
Inputs / Outputs
Input: PRE / SP-DIF OPTICAL (192 kHz - 24 bit) / ADLink
Output: PRE Bypass / ADLink
Filters
Filters: Removable module: (Hi-pass / Lo-pass / Band-pass 12 - 24dB) 32 steps 18 ÷ 7.5k Hz
Size
Dimensions (BxLxH): 259 x 67 x 510 mm (10"1/4 x 2"11/16 x 20"1/8)
Weight: 10.3 kg / 22.71 lb
Crossover Modules and Dual Power Settings
The amplifier features adjustable crossover modules with frequency settings including SS1 (18-33 Hz), SW1 (42-75 Hz), SW2 (90-150 Hz), WM1 (180-330 Hz), WM2 (420-750 Hz), WT1 (880-1.5k Hz), WT2 (1.8-3.3k Hz), and MT1 (4.2-7.5k Hz). Dual Power settings allow configuration of SET (A-Class, Hi-AB Class, Hi-Current, Energy Saving), BIAS (Very High, High, Standard, Low), POWER (Normal, High), and MIN LOAD (4Ω, 4Ω, 4-2-1Ω, 4-2-1Ω).
System Design Example
The system design example illustrates connections for a 2-way front system with a subwoofer, using analog and digital inputs. An analog source connects via ADLink to a PRE IN input, and a digital source connects via OPTICAL IN to another PRE IN input. Both are routed to the amplifier's PRE OUT and ACLink outputs. A DRC (Digital Remote Control) is connected for functions like Status Monitor, Master Volume (Optical IN), Balance, Fader, Volume Subwoofer, Mute, and Source Select. The amplifier is identified with AMP IDs for A CH - FRONT TW, B CH - FRONT WF, and SUBWOOFER.
Audison Thesis TH 1.5 violino Tweeter
Technical Specifications
| Parameter | Value |
|---|
| Component | Tweeter |
| Size | 34 (1"1/2) |
| Power Handling (peak) | 180 W |
| Power Handling (cont. program) | 180W@1.8Hz-12dB Oct. |
| Impedance | 8 Ω |
| Frequency response | 1k - 22k Hz |
| Sensitivity | 94 dB/SPL |
| Outer diameter | 65.5 mm |
| Mounting hole diameter | 60 mm |
| Magnet size | 60 mm |
| Total depth | 32.5 mm |
| Mounting depth | 14.5 mm |
| Weight of one component | 0.33 kg |
| Voice coil diameter | 34 mm |
| Magnet | Neodymium REN® |
| Dome | Tetolon Fiber® |
Electro-Acoustic Parameters
The following electro-acoustic parameters are provided:
| Parameter | Value |
|---|
| D | 35 mm |
| Re | 6 Ω |
| Fs | 980 Hz |
| Le (mH@1kHz) | 3.43 |
| Le (mH@10kHz) | 0.07 |
| Vas | 0.01 l |
| Mms | 0.51 g |
| Cms | 0.052 mm/N |
| BL | 3.61 T-m |
| Qts | 1.06 |
| Qes | 1.45 |
| Qms | 3.9 |
| Spl (1m/2.83V) | 94 dB |
A frequency response graph is included, showing sensitivity in dB versus frequency in Hz, with separate curves for frequency response and impedance.
Audison Thesis TH 3.0 voce Midrange
Technical Specifications
| Parameter | Value |
|---|
| Component | Cone Midrange |
| Size | 80 (3") |
| Power Handling (peak) | 100 W |
| Power Handling (cont. program) | 50 W |
| Impedance | 8 Ω |
| Frequency response | 200 - 8k Hz |
| Sensitivity | 86 dB/SPL |
| Outer diameter | 84 mm |
| Mounting hole diameter | 73 mm |
| Magnet size | 45 mm |
| Total depth | 44.4 mm |
| Mounting depth | 36 mm |
| Weight of one component | 0.265 kg |
| Voice coil diameter | 25 mm |
| Grille | Included |
| Magnet | Neodymium REN® |
| Cone | X-pulp® + Polycrystal® |
| Surround | TWR® |
Electro-Acoustic Parameters
The following electro-acoustic parameters are provided:
| Parameter | Value |
|---|
| D | 65 mm |
| Xmax | 1.5 mm |
| Re | 5.2 Ω |
| Fs | 150 Hz |
| Le (mH@1kHz) | 0.51 |
| Le (mH@10kHz) | 0.17 |
| Vas | 0.51 l |
| Mms | 3.35 g |
| Cms | 0.33 mm/N |
| BL | 4.51 T-m |
| Qts | 0.70 |
| Qes | 0.81 |
| Qms | 5.30 |
| Spl (1m/2.83V) | 86 dB |
A frequency response graph is included, showing sensitivity in dB versus frequency in Hz, with separate curves for frequency response and impedance.
Audison Thesis TH 6.5 sax Woofer
Technical Specifications
| Parameter | Value |
|---|
| Component | Woofer |
| Size | 165 (6"1/2) |
| Power Handling (peak) | 300 W |
| Power Handling (cont. program) | 150 W |
| Impedance | 6 Ω |
| Frequency response | 35 - 4k Hz |
| Sensitivity | 91 dB/SPL |
| Outer diameter | 163 mm |
| Mounting hole diameter | 145.5 mm |
| Magnet size | 90 mm |
| Total depth | 82.2 mm |
| Mounting depth | 71.5 mm |
| Weight of one component | 1.51 kg |
| Voice coil diameter | 40 mm |
| Grille | Included |
| Magnet | Neodymium REN® |
| Cone | X-pulp® + Polycrystal® |
| Surround | TWR® |
Electro-Acoustic Parameters
The following electro-acoustic parameters are provided:
| Parameter | Value |
|---|
| D | 129 mm |
| Xmax | 5 mm |
| Re | 4.5 Ω |
| Fs | 57 Hz |
| Le (mH@1kHz) | 0.78 |
| Le (mH@10kHz) | 0.3 |
| Vas | 10.82 l |
| Mms | 17.63 g |
| Cms | 0.45 mm/N |
| BL | 7.96 T-m |
| Qts | 0.41 |
| Qes | 0.44 |
| Qms | 6.37 |
| Spl (1m/2.83V) | 91 dB |
A frequency response graph is included, showing sensitivity in dB versus frequency in Hz, with separate curves for frequency response and impedance.
Audison Thesis TH 10 basso Subwoofer
Technical Specifications
| Parameter | Value |
|---|
| Component | Subwoofer |
| Size | 10 (10") |
| Power Handling (peak) | 1000 W |
| Power Handling (cont. program) | 500 W |
| Impedance | 4 Ω |
| Frequency response | 30 - 500 Hz |
| Sensitivity | 92 dB/SPL |
| Outer diameter | 261 mm |
| Mounting hole diameter | 234.5 mm |
| Magnet size | 170 mm |
| Total depth | 139 mm |
| Mounting depth | 123 mm |
| Total driver displacement | 2.6 l |
| Weight of one component | 7.96 kg |
| Voice coil diameter | 65 mm |
| Grille | Included |
| Magnet | High density flux ferrite |
| Cone | X-pulp® + Polycrystal® |
| Surround | TWR® |
| Xmech* | 18 mm |
*Xmech* maximum mechanic excursion: indicates the motion range in the speaker linear functioning area, in both ways.
Electro-Acoustic Parameters
The following electro-acoustic parameters are provided:
| Parameter | Value |
|---|
| D | 215 mm |
| Xmax | 10 mm |
| Re | 3.5 Ω |
| Fs | 34 Hz |
| Le (mH@1kHz) | 1.57 |
| Le (mH@10kHz) | 0.61 |
| Vas | 49.00 l |
| Mms | 84.00 g |
| Cms | 0.26 mm/N |
| BL | 15.10 T-m |
| Qts | 0.27 |
| Qes | 0.28 |
| Qms | 4.80 |
| Spl (1m/2.83V) | 92 dB |
A frequency response graph is included, showing sensitivity in dB versus frequency in Hz, with separate curves for frequency response and impedance.
Audison Thesis TH K2 coro System (2-way)
Technical Specifications
| Component | Size (mm) | TH 6.5 woofer | TH 1.5 tweeter |
|---|
| 2 way System | - | - | - |
| Power Handling (peak) | - | 350 W | - |
| Power Handling (cont. program) | - | 175 W | - |
| Impedance | - | 6 Ω | - |
| Frequency response | - | 35-22k Hz | - |
| Sensitivity | - | 91 dB/SPL | - |
| Crossover included | - | No | - |
| Grille included | - | Yes | - |
| Outer diameter (mm) | Woofer | 163 | - |
| Tweeter | - | 65.5 |
| Mounting hole diameter (mm) | Woofer | 145.5 | - |
| Tweeter | - | 60 |
| Magnet size (mm) | Woofer | 90 | - |
| Tweeter | - | 60 |
| Total depth (mm) | Woofer | 82.2 | - |
| Tweeter | - | 32.5 |
| Mounting depth (mm) | Woofer | 71.5 | - |
| Tweeter | - | 14.5 |
| Weight of one component (kg) | Woofer | 1.51 | - |
| Tweeter | - | 0.33 |
| Voice coil diameter (mm) | Woofer | 40 | - |
| Tweeter | - | 34 |
| Magnet | Neodymium REN® | Neodymium REN® | - |
| Cone/Dome | Woofer | X-pulp® + Polycrystal® | - |
| Tweeter | - | Tetolon fiber® |
Audison Thesis TH K3 orchestra System (3-way)
Technical Specifications
| Component | Size (mm) | TH 6.5 woofer | TH 3.0 midrange | TH 1.5 tweeter |
|---|
| 3 way System | - | - | - | - |
| Power Handling (peak) | - | 400 W | - | - |
| Power Handling (cont. program) | - | 200 W | - | - |
| Impedance | - | 6 Ω | - | - |
| Frequency response | - | 35-22k Hz | - | - |
| Sensitivity | - | 91 dB/SPL | - | - |
| Crossover included | - | No | - | - |
| Grille included | - | Yes | - | - |
| Outer diameter (mm) | Woofer | 163 | - | - |
| Midrange | - | 84 | - |
| Tweeter | - | - | 65.5 |
| Mounting hole diameter (mm) | Woofer | 145.5 | - | - |
| Midrange | - | 73 | - |
| Tweeter | - | - | 60 |
| Magnet size (mm) | Woofer | 90 | - | - |
| Midrange | - | 45 | - |
| Tweeter | - | - | 60 |
| Total depth (mm) | Woofer | 82.2 | - | - |
| Midrange | - | 44.4 | - |
| Tweeter | - | - | 32.5 |
| Mounting depth (mm) | Woofer | 71.5 | - | - |
| Midrange | - | 36 | - |
| Tweeter | - | - | 14.5 |
| Weight of one component (kg) | Woofer | 1.51 | - | - |
| Midrange | - | 0.265 | - |
| Tweeter | - | - | 0.33 |
| Voice coil diameter (mm) | Woofer | 40 | - | - |
| Midrange | - | 25 | - |
| Tweeter | - | - | 34 |
| Magnet | Neodymium REN® | Neodymium REN® | Neodymium REN® |
| Cone/Dome | Woofer | X-pulp® + Polycrystal® | - | - |
| Midrange | - | X-pulp® + Polycrystal® | - |
| Tweeter | - | - | Tetolon fiber® |
