MAULsally 818 10 LED Desk Lamp

Model: MAULsally 818 10

Manufacturer: MAUL (Jakob Maul GmbH)

Overview

This guide provides instructions for the maintenance and replacement of components for the MAULsally 818 10 LED desk lamp. The primary components covered are the battery and the LED light bar.

The lamp uses a 3.7V, 2600mAh Li-ion battery and features LED lighting. It is powered via USB.

Article Numbers:

Lamp Assembly: 8181009.160
LED Light Bar: 8181009.200
Circuit Board: 8181009.210
Battery: 8181009.240

Battery Replacement Procedure

The following steps detail how to access and replace the battery.

Step 1: Prepare the Base

Turn the lamp upside down to access the base. The base is secured by four rubber feet. These feet cover the screws that hold the base cover in place.

Visual Description: The underside of the lamp base is shown with four circular rubber feet highlighted. A Phillips screwdriver is positioned near one of the feet.

Step 2: Remove Rubber Feet

The rubber feet need to be removed to expose the screws. The process involves turning the feet.

Visual Description: The underside of the lamp base is shown again, with the rubber feet highlighted, revealing screws beneath them. A PH2 Phillips screwdriver is indicated.

Instruction: Turn the rubber feet [turn-arrow].

Step 3: Unscrew the Base Cover

Once the rubber feet are removed, you will find screws underneath. Unscrew these screws to detach the base cover.

Visual Description: The underside of the lamp base is shown with the rubber feet removed, exposing the screws. An arrow indicates the "DREHEN TURN" action.

Step 4: Access Internal Components

Carefully lift the base cover. This will reveal the internal components, including the battery and the main circuit board.

Visual Description: The lamp base is shown open, revealing the battery pack and the circuit board. An arrow indicates "ZIEHEN PULL" to disconnect the battery.

Component Details:

Battery: Li-ion Battery, Model: 18650/2600mAh/3.7V
Circuit Board: Art.-No.: 8181009.210

Step 5: Disconnect the Battery

Locate the battery connector on the circuit board and carefully pull it to disconnect the battery.

Visual Description: A close-up of the circuit board shows the battery connector. An arrow indicates "ZIEHEN PULL" to disconnect the battery.

Step 6: Remove the Old Battery

Once disconnected, the old battery can be removed from its housing.

Step 7: Install the New Battery

Connect the new battery to the circuit board, ensuring the connector is properly seated.

Step 8: Reassemble the Base

Replace the base cover and secure it with the screws. Reattach the rubber feet.

LED Light Bar Replacement Procedure

The following steps detail how to access and replace the LED light bar.

Step 1: Access the Lamp Head

The LED light bar is located in the lamp head. Access is gained by disassembling the lamp head assembly.

Visual Description: The lamp head of the MAULsally 818 10 is shown. A magnified view highlights the connection point for the LED light bar. A PH1 Phillips screwdriver is indicated.

Step 2: Disconnect the LED Light Bar

Locate the connector for the LED light bar within the lamp head and carefully pull it to disconnect the light bar from the main circuitry.

Visual Description: A close-up view shows the connector for the LED light bar. An arrow indicates "ZIEHEN PULL" to disconnect it.

Step 3: Remove the Old LED Light Bar

Once disconnected, the LED light bar can be removed from its housing in the lamp head.

Visual Description: The lamp head interior is shown with the LED light bar partially removed. An arrow indicates "RAUS ZIEHEN PULL OUT" to remove the LED light bar.

LED Light Bar: Art.-No.: 8181009.200

Step 4: Install the New LED Light Bar

Connect the new LED light bar to the appropriate connector in the lamp head.

Step 5: Reassemble the Lamp Head

Ensure all connections are secure and reassemble the lamp head components.

Technical Specifications

Power Consumption: 2.7W
Operating Temperature: 35°C
Battery Type: Li-ion
Battery Voltage: 3.7V
Battery Capacity: 2600mAh
Power Input: 230V (via USB adapter, not included)

Certifications: CE

Manufacturer Information

MAUL

Jakob Maul GmbH

Jakob-Maul-Str. 17

D-64732 Bad König

Email: contact@maul.de

Website: www.maul.de

	MAULsally 818 10 LED Desk Lamp - Features, Specs, and Spare Parts Explore the MAULsally 818 10 LED desk lamp. Features 24 LEDs, touch control for dimming, USB-C connectivity, and includes spare parts information. Learn about its design, functionality, and compliance.
	MAUL MAULsally Colour Vario Dimmable LED Desk Lamp - Portable, Rechargeable, Adjustable Explore the MAUL MAULsally Colour Vario LED desk lamp. This portable, rechargeable, and dimmable lamp offers adjustable color temperature (3000K-6500K) and brightness, a long-lasting battery (up to 3.5 hours), and a compact, foldable design. Features include USB-C charging, memory function, and IP20 protection. Ideal for any workspace or on-the-go.
	MAULexplore 820 56 LED Workplace Lamp - User Manual and Safety Guide Comprehensive guide for the MAULexplore 820 56 LED desk lamp, covering intended use, safety instructions, technical specifications, and disposal information.
	MAUL Akku LED Desk Lamp (Art. No. 81810) Technical Datasheet Technical datasheet for the MAUL Akku LED desk lamp, model 81810. Details include battery specifications (3.7V, 2600mAh Li-ion, 3.5-hour runtime), dimensions, weight, 24 LEDs, articulated arm with 180°/90° movement, and included USB cable. Features include ON/OFF, long press, and short touch controls for adjustable lighting.
	MAULiris 826 12 LED Magnifying Lamp - Removal and Assembly Instructions Detailed instructions for the removal and assembly of the MAULiris 826 12 LED magnifying lamp, including component identification, safety warnings, and step-by-step procedures with screwdriver types.
	MAULcraft 820 53 LED Desk Lamp - User Manual and Safety Information Comprehensive user manual and safety guidelines for the MAULcraft 820 53 dimmable LED desk lamp. Details intended use, installation, operation, features, certifications, and disposal.
	MAULrubia 820 15 LED Desk Lamp Assembly and Repair Guide Detailed instructions and component information for the MAULrubia 820 15 LED desk lamp, including assembly steps, part numbers, and technical specifications.
	MAUL MAULpuck 82012XX Declaration of EC-Conformity Declaration of EC-Conformity for the MAUL MAULpuck 82012XX luminaire, certifying compliance with European Union directives on Electromagnetic Compatibility, Electrical Equipment, Hazardous Substances, and Energy related products.