MAULexplore 820 56 LED Workplace Lamp

Introduction

This document provides operating instructions and safety information for the MAULexplore 820 56 LED workplace lamp.

Intended Use

The MAULexplore 820 56 is designed for high-precision work in dry indoor areas such as homes, offices, or workshops. It operates within an ambient temperature range of -10°C to +40°C and a relative humidity of up to 95%. The lamp is intended for mounting on horizontal surfaces.

General Safety Instructions

• Please read all enclosed operating instructions and information carefully and keep them for future reference.
• Observe all warnings indicated in the documentation and on the device.
• Use the luminaire only when it is in technically perfect condition, being aware of dangers and risks.
• Follow national safety regulations for installation and operation.
• Install the lamp only on a suitable surface using appropriate mounting materials.
• This lamp is intended for illuminating indoor rooms and work areas.
• Mount the luminaire only in dry and closed spaces.
• Do not use in potentially explosive atmospheres, as this can lead to explosions, death, or serious injury.
• Installation, repairs, and disassembly should only be performed by a qualified electrician unless otherwise stated.
• Ensure correct power connection as per Class II requirements (double insulation, no protective earth conductor).
• Compare the available mains voltage with the operating voltage and frequency specified on the nameplate to ensure they are identical.
• Do not use damaged luminaires.
• Always disconnect the lamp from the mains before working on it.
• Do not alter or modify the luminaire.
• Do not hang or attach anything to the lamp.
• Do not cover the luminaire.
• Do not leave children unattended with the luminaire; it is not suitable for children.
• Dispose of packaging according to local regulations.
• Disconnect the lamp from the mains and allow it to cool down before cleaning and maintenance.
• Clean only with a dry, soft, and lint-free cloth.
• If the external flexible cable or cord is damaged, it must be replaced exclusively by the manufacturer, their service agent, or a similarly qualified person to avoid hazards.
• For light source replacement, refer to the respective operating instructions or packaging for details on whether it must be carried out by a trained electrician or a qualified person.

Technical Specifications and Features

• Model: MAULexplore 820 56
• Brand: MAUL
• Light Source: 84 LEDs
• Power Consumption: Max. 21W
• Power Supply: 220-240V~, 50 Hz
• Cable Length: Approximately 2 meters (ca. 2 m)
• Mounting Clamp Range: 10-63 mm
• Protection Class: II (double insulation, no protective earth conductor required)
• Dimming: Yes (controlled via ON/OFF, +, - buttons)
• Beam Angle: 100° half intensity angle
• Certifications: CE mark, TÜV Rheinland Certified Safety (GS)
• Operation: Designed for precise work in dry indoor environments.

Diagram Descriptions

• Lamp Diagram: Depicts an adjustable arm lamp with a flexible neck and a light head, mounted via a clamp.
• Control Panel: Shows an ON/OFF button, '+' and '-' buttons for adjusting brightness, and icons representing dimming or light modes.
• Clamp Mechanism: Illustrates the lamp's attachment to a surface, specifying a clamp range of 10-63 mm.
• Power Connection: Shows a CEE 7/16 plug and indicates power requirements (220-240V~, 50 Hz, max. 21W).
• LED Array: A visual representation of the 84 LEDs within the lamp head.
• Symbols: Various symbols denote features like dimmability, beam angle, electrical protection class (Class II), requirement for a skilled electrician for certain tasks (LED replacement, operating device replacement), and general hazard warnings.

Disposal Information

This lamp must not be disposed of in unsorted household waste. It should be collected as electrical waste at designated facilities. Contact your local city or municipal administration for information on available disposal options and facilities.

Manufacturer Information

License Holder Name: Jakob MAUL GmbH

Address: Jakob-Maul-Str. 17, D-64732 Bad König, Germany

Contact:

• Tel.: +49 (0)6063/502-100
• Fax: +49 (0)6063/502-210
• E-Mail: contact@maul.de
• Website: www.maul.de

Spare Parts

The document also lists spare parts with article numbers:

• Article No.: 8205609.210
• Article No.: 8205609.200B

Diagrams of electronic components (circuit boards) are shown for these spare parts.