MAULrubia 820 15 LED Desk Lamp

Product Overview

The MAULrubia 820 15 is an LED desk lamp manufactured by Jakob Maul GmbH. This document outlines its components and provides assembly or disassembly instructions.

The lamp features adjustable positioning and is powered by an external adapter.

Key components and their article numbers:

MAULrubia 820 15 Lamp Body (main unit)
LED Strip: Art.-No.: 8201509.200
Power Adapter: Art.-No.: 8201509.215
Circuit Board Assembly: Art.-No.: 8201509.220
Other part mentioned: Art.-No.: 8201509.160

The product operates on 220-240V, 50/60 Hz, with a maximum power consumption of 17 W.

Manufacturer information: Jakob Maul GmbH, Jakob-Maul-Str. 17, D-64732 Bad König, www.maul.de.

Safety and operational symbols observed: LED indicator [?], 230V power input [?], general safety warning [⚠️ person at desk], proper electronic waste disposal [?️].

Assembly and Disassembly Instructions

The following steps describe common maintenance or assembly procedures:

Step 1: Lamp Arm Component Removal

Action: Pull the component.

Requires a PH0 screwdriver.

Visual description: A section of the lamp arm is shown, with an arrow indicating to "PULL" or "ZIEHEN". A circled area indicates the point of action.

Step 2: Lamp Arm Component Rotation

Action: Rotate the component.

Visual description: A section of the lamp arm is shown, with an arrow indicating to "ROTATE b)" or "DREHEN b)".

Step 3: Lamp Arm Screw Removal

Action: Unscrew two screws.

Requires a PH0 screwdriver.

Visual description: A section of the lamp arm is shown, with two circled areas indicating screw locations. A PH0 screwdriver is depicted.

Step 4: LED Strip Replacement

Action: Push and Pull to remove/insert the LED strip.

Visual description: The lamp arm interior is shown with the LED strip. Arrows indicate to "PUSH a)" or "DRÜCKEN a)" and "PULL b)" or "ZIEHEN b)" for manipulating the LED strip.

Base Disassembly - Step 1

Action: Remove rubber feet and one screw.

Requires a PH1 screwdriver.

Visual description: The underside of the lamp base is shown. Five circular rubber feet are circled, and one screw is circled. The MAUL logo and product specifications are visible on the base.

Base Disassembly - Step 2

Action: Remove six screws.

Requires a PH2 screwdriver.

Visual description: The underside of the lamp base is shown with six screws circled. A PH2 screwdriver is depicted.

Base Disassembly - Step 3

Action: Access internal components.

Visual description: The inside of the lamp base is shown after removing the cover. The circuit board assembly is visible, attached by two screws (PH2).

Base Disassembly - Step 4

Action: Disconnect circuit board assembly.

Visual description: The circuit board assembly is shown with connectors. Arrows indicate to "PUSH a)" or "DRÜCKEN a)" and "PULL b)" or "ZIEHEN b)" for disconnecting cables or components.

Final Connection

Action: Pull the power cable.

Visual description: The complete lamp is shown with the power adapter connected. An arrow indicates to "PULL" or "ZIEHEN" the cable, likely referring to the connection at the base.

Key Components

LED Strip (Art.-No.: 8201509.200): A linear strip containing multiple LEDs, designed to fit into the lamp arm.

Power Adapter (Art.-No.: 8201509.215): An external AC to DC power supply unit with a European-style plug and a DC barrel connector.

Circuit Board Assembly (Art.-No.: 8201509.220): Contains the electronics for power management and potentially dimming/control, including a USB port.

	MAULrubia 820 15 LED Desk Lamp - Specifications and Spare Parts Detailed information about the MAULrubia 820 15 LED desk lamp, including features, specifications, spare parts, and energy efficiency class. Learn about its touch controls, USB port, and power adapter.
	MAULrubia 820 15 LED Desk Lamp - Features, Specifications, and Spare Parts Discover the MAULrubia 820 15 LED desk lamp by MAUL. This guide details its 48-LED lighting, 4-stage touch control, USB charging port, and technical specifications. Includes information on available spare parts like power adapters and LED strips.
	MAULpearly 820 17 LED Desk Lamp Disassembly and Service Guide Detailed instructions for disassembling and servicing the MAULpearly 820 17 LED desk lamp, including component identification and step-by-step procedures.
	MAULpirro 820 27 LED Desk Lamp Assembly and Disassembly Guide Detailed instructions for assembling and disassembling the MAULpirro 820 27 dimmable LED desk lamp, including component identification and step-by-step procedures.
	MAULpirro 820 26 LED Desk Lamp Assembly and Component Guide Comprehensive guide for the MAULpirro 820 26 LED desk lamp, detailing its components, assembly steps, and disassembly procedures. Includes article numbers and technical descriptions.
	MAULiris 826 12 LED Magnifying Lamp - Removal and Assembly Instructions Detailed instructions for the removal and assembly of the MAULiris 826 12 LED magnifying lamp, including component identification, safety warnings, and step-by-step procedures with screwdriver types.
	MAUL jazzy 820 18 LED Desk Lamp - Assembly and Component Guide Detailed guide for the MAUL jazzy 820 18 LED desk lamp, covering component identification, disassembly, and reassembly steps for parts like the LED module, electronic board, and power adapter.
	MAULbusiness LED 820 40 Desk Lamp: Specifications and Assembly Guide Comprehensive guide to the MAULbusiness LED 820 40 desk lamp by MAUL. Features include detailed specifications, step-by-step assembly instructions, power requirements, cable length, energy efficiency class information, and spare parts. Visit www.maul.de for support.