OUKITEL P1000 PLUS Portable Power Station

Introduction

We appreciate your purchase of the P1000PLUS Portable Energy Storage Power Supply. Please read this manual carefully to ensure correct usage. Keep this manual and your invoice for product reimbursement and future reference.

The product is shipped with approximately 30% charge. Please charge it fully before first use. Avoid using extension cords or cable taps; charge directly from wall sockets. When charging, do not use the same socket as other devices.

Model: P1000PLUS (US) V1.1

Content Overview

• Disclaimers
• Packing List
• Precautions for Use
• Specifications
• Product Description
• Screen Display Precautions
• UPS Mode
• UPS Connection Diagram
• Solar Panel Connection Solution
• Onboard Charging
• Product Parameters
• FAQ
• Maintenance

Disclaimers

Read this user manual carefully before use. Incorrect usage may cause serious injury or damage to the product and property. By using this product, you agree to all terms in this manual. The company is not responsible for losses due to failure to use the product as per the User Guide. The company reserves the right to interpret this document and related product documents.

Packing List

• Portable Energy Storage Power Supply
• AC power cord
• MC4-XT60 cable
• User Guide

Precautions for Use

1. Avoid high temperatures, humidity, and direct sunlight. Do not use near a fire.
2. Do not disassemble or modify the product to prevent malfunction or fire.
3. Dispose of or recycle the product according to local laws.
4. Avoid dropping the product or exposing it to strong impacts.
5. Keep the product out of reach of children.
6. Use only genuine accessories. Use of non-genuine products may void the warranty.
7. Ensure ventilation space of more than 30cm around the product's suction and exhaust ports during operation.
8. When not in use, turn off the power and unplug the power cord. Store in a cool, dry place away from direct sunlight.
9. For long-term storage, charge the product to about 50% every 3 months.
10. If the product, auxiliary line, or connecting equipment appears defective, do not use it. Contact customer service.
11. Avoid storing the product in vehicles or warehouses with extreme temperatures to prevent battery degradation.
12. This product is not intended for powering critical medical equipment like ventilators or ECMO. Consult the manufacturer before using with other medical devices.
13. The product may generate electromagnetic fields that could affect medical implants. Consult a physician if you use such devices.

Specifications

Product Description

The OUKITEL P1000 PLUS is a portable power station designed for home emergency backup, outdoor travel, and emergency situations. It features a built-in lithium iron phosphate battery, supporting AC fast charging, vehicle charging, and solar panel charging. It also includes a UPS function, providing power within 10ms during utility outages. The AC output is a pure sine wave, with adjustable frequency (50Hz/60Hz) for optimal protection of appliances.

Product Interface and Controls

Control Functions:

• Power Switch: Press and hold for 3 seconds to turn the system on/off.
• DC Switch: Short press to turn DC output ports on/off.
• AC Switch: Short press to turn AC output ports on/off. The total AC load should not exceed 1800W.
• LED Switch: Short press cycles through constant light, SOS, and flashing modes. Long press toggles silent mode.
• LCD Screen: Displays power and usage status.
• DC5521 Output: 12V/3A
• Cigar Lighter: 12V/10A
• USB-A/Type-C: Supports various charging standards including QC3.0 (18W), PD (20W), and PD (100W).

Screen Display Precautions

• Fan Icon: Ensure air inlets are not blocked when the icon is on.
• Flashing Temperature Icon (High/Low): Indicates the internal temperature is too high or too low. The device will stop working until it returns to a normal temperature.
• Flashing Port Icon: Indicates an abnormal output from the corresponding port. Check the load.
• Flashing Silent Mode Icon: Indicates the product has entered silent mode.

UPS Mode

The product features a bypass mode allowing direct output from AC power without using the battery. In UPS mode, if the AC input is interrupted, the product automatically switches to battery power within 10ms, ensuring uninterrupted operation of connected equipment.

When the mains power is cut off, the product automatically switches to its internal battery supply. Note: Japanese/American regulations support a maximum current of 14A in UPS mode, while Chinese/British/European/Korean regulations support 10A. An overloaded AC output will cause the UPS icon to flash, and the AC icon to go out, interrupting output.

Solar Charging

The product can be charged by solar panels with a power of up to 500W. Full charge can be achieved in approximately 2 hours with a 500W solar panel. Charging power depends on weather conditions. Warning: Solar panel voltage exceeding 50V will damage the device and void the warranty.

Note: Solar panels are not included accessories.

Car Charging

The product can be charged using the car's cigarette lighter (ACC) via the ACC charging cable. Connect the cable to the car's cigarette lighter and the XT60 interface on the power station. Turn on the product's power and start the car engine. The LCD screen will display the input power.

Important: Onboard charging should be performed while the car engine is running to prevent draining the car battery. Car charging typically provides 90-240W, which is a slow charging process (12V/8A or 24V/10A). For faster charging, utility power is recommended.

Product Parameters

FAQ

Maintenance

Regularly check the cooling air inlet/outlet for blockages. Ensure at least 30cm of clearance around these areas. For long-term storage, maintain a charge of approximately 50% and recharge every three months.