Outdoor Generator - User Manual
PORTABLE POWER STATION
Introduction
We deeply appreciate you for purchasing the P2001 PLUS Portable Energy Storage Power Supply. Be sure to read this book carefully before using the product to ensure you use it correctly. The book is required for product reimbursement. Consequently, it is advisable to keep it, alongside the invoice and other purchase certificates.
To guarantee the safety of this product during transportation, it is only about 30% charged when it is packed. As such, you are required to charge it immediately after opening and before use.
Please avoid the use of extension cords or cable taps, as this product can be charged directly from wall sockets etc. When using two or more sockets for charging, please avoid using any other products on the same socket.
Disclaimers
Before using the product, please read the user manual carefully to ensure that you fully understand it before use. After reading, please keep the user's manual in a safe place for future reference. If you use this product incorrectly, you may cause serious injury to yourself or others, as well as product damage and property damage.
Once you use this product, you can be deemed to have understood, recognized and accepted all the terms of this manual. Users undertake responsibility for their own actions and all the consequences that may arise therefrom.
OUKITEL does not assume any responsibility for any loss caused by users' failure to use the product in accordance with the User Guide. In order to comply with laws and regulations, the company has the final interpretation of this document and all related documents of this product.
Packing List
Illustration of the packing list items: The Portable Energy Storage Power Supply unit, an AC power cord, the User Guide, an XT60-MC4 Cable, and an XT60-Car Charger Cable.
- Portable Energy Storage Power Supply
- AC power cord
- User Guide
- XT60-MC4 Cable
- XT60-Car Charger Cable
Precautions for use
- Please avoid high temperature and humidity. Please avoid using the product in direct sunlight and near a fire.
- Please be sure not to disassemble or modify the product, as it may cause malfunction or even a fire.
- Please dispose off or recycle the product in accordance with the methods stipulated by local laws.
- Be careful not to drop the product from a high place or expose it to any form of strong impact.
- Please store or use the product out of the reach of children.
- Please use the company's genuine products for the accessories. Customers who use non-genuine products and suffer adverse consequences as a result, cannot enjoy free maintenance.
- When using this product, please do not interfere with the cooling of the product; please ensure the ventilation space of more than 30CM from the side suction and exhaust port is clear.
- When the product is not in use, please turn the body power off and unplug the power cord. Please avoid storing the product in a place with high temperature, high humidity, and direct sunlight.
- If you need to store the product for a long period of time, please make sure to deplete the charge once every 3 months, and then recharge it to about 50%.
- If there is any doubt that the product body, the auxiliary line, or the connecting equipment are defective, please do not continue to use the product. Instead, contact the after-sales personnel to solve the problem in time.
- Please do not store the product for a long time in a car or field warehouse or other places that may experience extreme high and low temperatures, to prevent the battery life from shortening amongst other failures.
Specifications
Illustration of the specifications table detailing Capacity (LiFePo4 51.2V), Cycle life (≥3500), Weight (22KG), Size (L399*W286*H320mm), Cigar Lighter (12V/10A), USB-A (5V/2.4A) x2, USB-C (PD-20W) x2, USB-C (PD-45W) x1, USB-C (PD-100W) x1, Output (12V/3A) x2. Also lists AC output (2400W) for JP, USA, EU, AC Input (100-120V/1800W JP&USA, 200-240V/3200W EU), and PV/DC Input (12-60V/15A, 500W MAX).
| Feature | Specification |
|---|---|
| Capacity | LiFePo4 51.2V |
| Cycle life | ≥3500 |
| Weight | 22KG |
| Size | L399*W286*H320mm |
| Cigar Lighter*1 | 12V/10A |
| USB-A*2 | 5V/2.4A |
| USB-C *2 | PD-20W |
| USB-C *1 | PD-45W |
| USB-C *1 | PD-100W |
| Output*2 | 12V/3A |
| AC (JP) | 2400W(JP) AC100V 50/60HZ |
| AC (USA) | 2400W(USA) AC120V 50/60HZ |
| AC (EU) | 2400W(EU) AC220V-240V 50/60HZ |
| AC Input | 100-120V/1800W (JP&USA) 200-240V/3200W(EU) |
| PV/DC Input | 12-60V/15A(MAX) 500W(MAX) |
Product Description
This product is a portable energy storage power supply, suitable for home emergency power backup, outdoor travel, and emergency disasters that require power. In addition, it can also be used for outdoor work, amongst other applications.
This product has a built-in lithium iron phosphate battery, which supports AC fast charging, vehicle charging, and solar photovoltaic panel charging. It features a UPS function, and when the utility power fails, it can switch to battery power within 10ms to supply power to electric equipment.
The AC output of this product is pure sine wave waveform and can be manually converted from 50Hz to 60Hz to provide better protection for electrical appliances.
This product comes with a telescopic dragging trolley bar, convenient for you to carry this product easily.
Product Interface and Operation
Diagram of the power station's front panel with numbered controls: ① Power switch, ② AC switch, ③ DC switch, ④ USB switch, ⑤ LCD screen. Diagram of the rear/side panel with numbered ports: ⑥ Air inlet/outlet, ⑦ PV/DC input port, ⑧ AC power adjustment knob, ⑨ AC input port, ⑩ Overload protector.
1. Power switch
How to use: Press and hold the power button for 3 seconds to revive the system and turn on the LCD display. Press and hold it again for 3 seconds to turn off the power system.
2. AC switch
AC switch (AC output port *4): The total electrical power load should be less than 2400W (JP), 2400W (USA), 2400W (EU).
- AC output voltage and frequency standards vary in different countries. Please check the AC voltage and frequency of the equipment before use.
- Long press the AC button + USB button for 3 seconds to achieve frequency switching.
- By pressing the AC button 10 times in a row, the AC output voltage can be switched between 100/110/120V (JP OR USA) and 220V/230V (EU).
3. DC switch
Usage: Short press the DC button to open the DC output port in the power-on state, and short press it again to close it.
4. USB switch
Usage: Short press the USB button to open the USB output port in the power-on state, and short press again to close it.
Diagrams showing USB port types and their specifications: USB-A x2 (5V/2.4A), USB-C x2 (PD-20W), USB-C x1 (PD-45W), USB-C x1 (PD-100W). Also shows Output x2 and Cigar Lighter x1.
LCD switch
Display the power and usage status of the product.
Cooling air inlet/outlet
The cooling fan will run automatically when the product reaches a certain temperature during use. Please avoid blocking the cooling air inlet/outlet and do not place objects within 30cm of the cooling air inlet/outlet during the use of the product.
PV/DC input port
The product can be charged by connecting the solar panel with the standard PV/DC port charging cable.
- The input of the solar panel can be up to 500W, with the maximum voltage being 60V.
- If the PV/DC input port is charged with a voltage higher than 60V, the product will be damaged. A failure that is not covered by the warranty.
AC power adjustment knob
Turn the knob to the corresponding gear to get the AC charging power of the corresponding gear. When using the AC fast charging gear, you need to ensure that the output voltage of the power supply device meets 100-120V (JP OR USA) or 200-240V (EU).
When the output voltage of the charging equipment is 100-120V, the maximum charging power is 1800W (JP OR USA). When the output voltage is 200-240V, the maximum charging power is 1800W (EU).
AC charging port
After connecting the utility power to the AC charging port using the standard AC charging cable, you can charge this product. Please ensure that the AC voltage and frequency of the device are consistent with the utility power before using the AC port for charging.
Overload protection button
In case of unstable power voltage supply due to lightning or other reasons, or if there is a large voltage input at the AC terminal, the overload protection function (safety circuit breaker) will be activated to protect this product and disconnect the AC input port from external devices. Please restore the AC input function of this product in the following order:
- Turn off the power button and unplug all ports.
- After confirming that there is no abnormality in each part, turn on the power button.
- Press the overload protection button and turn on the AC cable to resume AC input.
Note on screen display
Diagram of the LCD display interface showing various indicators: DISCHARGE REMAINING (time/hours), UPS mode, INPUT Watts, OUTPUT Watts, 60 Hz. Numbered indicators include: ① Using time/charging time, ② High temperature protection, ③ Low temperature protection, ④ Fan status, ⑤ Power status, ⑥ Total input power, ⑦ PV charging mode, ⑧ DC(12V) output, ⑨ Cigarette lighter (12V) output, ⑩ Fast charging mode, ⑪ USB output, ⑫ Silent mode, ⑬ PD output, ⑭ Frequency Switching, ⑮ UPS mode, ⑯ Total output power, ⑰ Overload protection, ⑱ AC output, ⑲ Supercharge.
- When the air inlet icon is on, please ensure that the air inlet on both sides of the product is not blocked.
- When the indicator icon flashes, it means that the internal temperature of the machine is too high or too low, at which time the device opens the intelligent protection program, forcing the machine to stop working normally. (Wait for the machine to return to normal temperature, then you can start working again).
- When the indicator icon is flashing, it means the utility input is abnormal, please check the charging end connection.
- When this icon is flashing, it means the corresponding port output is abnormal, please check the load situation.
Press and hold the USB button for 2 seconds to enter silent mode.
UPS mode
The product has a bypass mode that can complete the output directly from AC power without the need to pass through the battery. In UPS mode, when the city's AC input is suddenly interrupted, the product can automatically switch to battery power within 10ms, guaranteeing the normal operation of AC equipment.
Diagram illustrating the UPS connection, showing the power station connected between a wall socket and an electrical appliance, with the power cord plugged into the AC input.
Once you turn on the electrical device, it makes use of grid AC power directly. When the utility power is cut off while in this state, it will automatically switch to the product's internal battery power.
※ With the US standard, Japanese standard: In UPS mode, if the maximum AC output power is less than 1400W and the AC output exceeds 1400W, the UPS icon blinks, indicating an overload, and while the AC icon is off, the output is interrupted.
※ With the Chinese standard, British standard, European Standard, Korean standard: In UPS mode, the maximum current of AC output is 15A, and when the AC output exceeds 15A, the UPS icon flashes, indicating overload, while the AC icon turns off output interrupt.
Solar panel connection solution
This product can both be connected to and charged by the solar panel. With a solar panel power of 500W, and at least 4 hours, full charge can be achieved (Solar panel charging maximum 500W, maximum input voltage 60V).
※ Solar panel charging power is affected by factors like weather, climate, and other conditions.
※ Solar panel voltage over 60V will damage the device and may be out of warranty.
Diagrams for Solar panel connection scheme: Option 1 shows one solar panel connected via PV port. Option 2 shows multiple solar panels connected in series/parallel via PV port.
-Solar charging
Option 1
Diagram shows AC input and PV port on the power station, connected to a single solar panel.
Option 2
Diagram shows AC input and PV port on the power station, connected to multiple solar panels (Solar panel A, Solar panel B).
Onboard charging
This product can be charged by the cigarette lighter (accessory: hereinafter referred to as ACC) in the car by using the ACC charging cable for mobile charging.
Turn the power of the product ON, connect the ACC charging cable to the cigarette lighter in the car and the Anderson connector on the side of the product, turn on the car engine, and the LED of the product will show the input power.
※ Onboard charging ought to be done when the car engine is started. Failure to start the engine may cause the car's battery to run out of power.
※ Onboard charging is usually low power of 90-240W and the charging time is long (12V/8A or 24V/10A). If fast charging is required, utility power is advised.
Diagram illustrating onboard charging, showing the power station connected to a car's cigarette lighter via an AC input and car charge cable (not included accessory).
Product Parameters
| Parameter | Value |
|---|---|
| Product Name | P2001 PLUS |
| Product size | L399*W286*H320 |
| Product weight | 22KG |
| Battery Capacity | 2048WH |
| AC charge | 100-120V/15A,MAX1800W(JP OR USA) 200-240V/15A,MAX1800W(EU) |
| PV input | 12-60V/15A, 500Wmax |
| AC output | 100V/2400W(JP), 120V/2400W(USA), 220-240V/2400W(EU) 50/60HZ pure sine wave |
| USBQC3.0 | (5-12V18W)x2 |
| Type-C | (5-20V/20W)×2, (5-20V/45W)×1 |
| Type-C | 5-20V/5.0A, 100W max with PD3.0 protocol |
| DC 5521 | 12V/3A x 2 |
| Car charger output | 12V/10A |
| UPS | 100-120V/1400W(JP/USA), 200-240V/2000W(EU) |
| Charging temperature | 0~40℃ |
| Operating temperature | -10~40℃ |
| Ambient humidity | <90%RH |
| Cycle charge | >3500 |
Battery Specification
| Parameter | Value |
|---|---|
| Type | Lithium iron phosphate |
| Single battery rated voltage | 3.2V |
| Rated capacity of single battery | 20AH |
| Battery pack rated voltage | 51.2V |
| Single cell weight | 376g |
| Rated capacity of battery pack | 2048Wh |
FAQ
- The appliances power is within the rated output power range of the product but it cannot be used?
The power of the product is low and needs to be recharged. When some electrical appliances are started, the peak power is higher than the product power, or the nominal power of the electrical appliance is greater than the product power.
- Why is there a sound when using it?
The sound comes from the fan or the relay when you start or using the product.
- Is it normal the charging cable heat up during use?
Yes, it is. The cable complies with national safety standards and has applied the certificates.
- What kind of battery we use in this product?
The battery type is lithium iron phosphate.
- What devices the product can support by the AC output?
AC output rated power is 2400W (JP), 2400W (USA), 2400W (EU). The corresponding load product should be less than the rated output power of the product.
- How can we know the remain using time?
Please check the data on the screen, it will show the remain using time when you turn on.
- How can we confirm the product is recharging?
When the product is under charging, the product screen will show the input wattage, and the power percentage indicator will blink.
- How should we clean the product?
Please use a dry, soft, clean cloth or tissue to wipe the product.
- How to storage?
Please turn off the product and place it in a dry environment. Do not place this product near water.
For long-term storage, we recommend to use the product every three months (Run out the remain power first and recharge it to the percentage you want, such as 50%).
- Can we take this product on airplane?
NO, you can't.
- Is the actual output capacity of the product the same as the target capacity in the user manual?
The capacity of the user manual is the rated capacity of the battery pack of this product. Because this product has a certain efficiency loss during the charging and discharging process, the actual output capacity of the product is lower than the capacity specified in the user manual.
- What is the maximum output power of a single AC interface?
Each interface of the product has a maximum output current marked, and the maximum output power of the interface can be calculated according to the local output voltage and maximum current. The load power cannot be greater than the maximum output power that a single interface can withstand. Failure to do so will result in damage to the product.
