Razor AC Series Installation Guide

Thanks for choosing our Razor AC Series ceiling fan. We strongly recommend that you read this manual carefully before installation.

Model Parameters

Fan Only

• MRF134W: 1320mm 4 Blade Ceiling Fan White
• MRF134M: 1320mm 4 Blade Ceiling Fan Matt Black
• MRF134B: 1320mm 4 Blade Ceiling Fan Brushed Nickel

Fan and LED Light

• MRF1343W: 1320mm 4 Blade Ceiling Fan White with 28w LED Light

Part List

• Qty 1x motor assembly
• Qty 1x hanging bracket
• Qty 1x instruction manual
• Qty 1x wall control kit
• Qty 1x screw kit
• Qty 4x blades
• Qty 1x balancing kit

Application

Application Types

• Flat Surface / Ceiling: Suitable ✔️
• Slope Ceiling up to 15°: Suitable ✔️
• Corrugated Ceiling: Not Suitable ❌
• Apex Ceiling: Not Suitable ❌

How to Assemble

Fig. 1

Secure the hanger bracket to a ceiling beam or a suitable piece of timber inserted between the ceiling beams using the two long screws supplied with the package.

Fig. 2

Place fan into hanger bracket and align Ball Joint Slot with hanger bracket as illustrated.

Fig. 3

After wiring is completed, attach the canopy to the hanger bracket by pushing upwards and twisting anti-clockwise. Tighten screws and ensure canopy is not touching the ball joint.

WARNING

Installation MUST carry out by a qualified and licensed electrician.

How to Install Blades

Fig. 4

Remove the two screws from the covering plate. Insert blade one at a time through four slots around the centre band and secure with three screws for each blade through the top opening. Repeat this procedure for all blades. Replace the cover plate and secure with two screws once all four blades have been firmly fitted.

Note: Ensure the blades do not get damaged or bent during the installation process while the fan maybe on the ground, this will affect the performance and balance of the fan and this is NOT covered under warranty.

CCT (Colour Changeable Temperature)

Fg.6

Choose colour temperature by flicking the switch in the LED: WW = 3000K warm white, NW = 4000K neutral white, CW = 5000K cool white.

How to Install / Remove the Cover

Fg.7 Fan and Fan LED Light Model

Turn anti-clockwise to remove and clockwise to tighten.

Dimming

3-Step Dimming

The Razor ceiling fan has a smart 3-step dimming LED light module which doesn't require a dimmable remote control or a wall dimmer. It only requires a normal on/off remote kit (MPREMS) or a normal light wall switch. (Supplied in remote control kit). Turn the switch on and the light will turn on. Flick the switch on/off within 1 second and the light output will dim down to approx. 50%. Flick the switch on/off again and the light output will dim down to approximately 15%. The light kit has no memory function, It will turn on 100% initially.

Installing Receiver Remote Control

Wiring Diagram Description

The receiver wiring diagram shows connections from AC power input (Live, Neutral, Ground) to the receiver unit. The receiver then connects to the Fan Motor (Live, Neutral, Capacitor, Light Live, Ground) and the Antenna is shown extending from the receiver. A separate diagram illustrates the installation of a transmitter wall mount holder with two screws.

Setting the code on transmitter

• 1. Remove battery cover
• 2. Slide code switches to your choice of ON/OFF position
• 3. Install battery (supplied)

Setting code on receiver

• 1. Slide code switches on the receiver in the same position set on the transmitter.

Transmitter Wall Mount

• Install the transmitter wall mount holder with two screws.

Optional Accessories

Martec Remote Controls (Sold Separately)

• MPREMES: Premier Remote Control
• MPLCDS: Premium LCD Remote Control
• MWFBT: Smart Remote Control

Wire Connections

NB: Wall control Fan Only

Wiring diagram for wall control of fan only. Shows connections from AC power input (Live, Neutral, Ground) to the wall control, and from the wall control to the fan motor (Live, Neutral, Capacitor, Light Live, Ground) via a hanging bracket and terminal block.

NB: Wall Control Fan LED Light

Wiring diagram for wall control of fan with LED light. Shows connections from AC power input (Live, Neutral, Ground) to the wall control, and from the wall control to the fan motor (Live, Neutral, Capacitor, Light Live, Ground) via a hanging bracket and terminal block, with additional connections for the LED light.

6* Year Warranty

Details

• Visit our website for details: https://www.martecaustralia.com.au/warranty-statement/

WARNING

• Installation of fans MUST follow SAA standards and meet local authority regulations.
• Installation MUST be carried out by a qualified and licensed electrician.
• Fan and light MUST be earthed.
• Bracket MUST be firmly attached to a flat solid structure or timber frame.
• DO NOT mix blades from one model to another; all blades MUST be replaced if damaged.
• The warranty is VOID if product is not installed according to this installation guide.