Product Overview
This document provides comprehensive instructions for the MARTEC Link AC Series ceiling fans. It covers essential safety precautions, assembly steps, installation procedures, and wiring diagrams to ensure proper setup and operation.
Designed for efficient air circulation, these fans are suitable for various indoor environments.
Models Covered
This manual applies to the following MARTEC Link AC Series models:
- FSL124
- FSL1244
- FSL1243
The package typically includes the motor assembly, instruction manual, screw kit, balancing kit, hanging bracket, wall control kit, and blades.
Important Safety Information
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT.
- Ensure the fan is operated from a power source matching the product's rating.
- Install the fan so blades are at least 2.1 meters above the floor.
- Keep hands, hair, and clothing away from moving parts during operation.
- Installation must be performed by a qualified and licensed electrician following S.A.A. standards and local regulations.
- The fan and light must be earthed.
- Only use Martec Pty Ltd approved wall controllers to avoid voiding the warranty.
- Do not expose the product to rain, moisture, or liquids to reduce the risk of electric shock.
For further assistance or product information, please refer to the official MARTEC website or contact their support channels.
Website: www.martecaustralia.com.au
Contact: sales@martecltd.com.au | Phone: 02 8778 7500
Martec® Australia | Life, enhanced®
