SÅGMÄSTARE Shelving Unit
Important Safety Information
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall with the included wall attachment devices.
Fastening devices for the wall are not included since different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. For advice on suitable fastening devices, contact your local specialized dealer.
Parts Included
- 12x Screws (Part ID: 10130087)
- 4x Screws (Part ID: 10045513)
- 4x Screws (Part ID: 10036516)
- 2x Wall mounting brackets (Part ID: 10121907)
- 2x Wall mounting plates (Part ID: 114664)
- 1x Adhesive pad set (Part ID: 10114785)
Assembly Instructions
Step 1
Insert screws (10036516) into the threaded ends of the leg components. Ensure they are securely fastened.
Step 2
Attach the assembled leg components to the side panels. Insert the threaded end of the leg into the corresponding holes on the side panels and secure with screws (10130087). Repeat for all four legs.
Step 3
Connect the side panels using the lower shelf. Insert the dowels/screws into the pre-drilled holes and secure the shelf between the side panels.
Step 4
Add the next shelf level by inserting it onto the pre-installed supports or dowels.
Step 5
Repeat the leg assembly process from Step 1 and Step 2 for the other side of the unit.
Step 6
Insert the shelf support pins into the designated holes on the side panels at the desired shelf heights.
Step 7
Place the next shelf onto the support pins.
Step 8
Continue placing shelves onto the support pins.
Step 9
Place the top panel onto the assembled structure.
Step 10
Secure the top panel by inserting screws (10045513) through the designated holes.
Step 11
Attach the wall mounting brackets (10121907) to the back of the shelving unit using the provided screws. Use the adhesive pads (10114785) to help position the brackets.
Step 12
Adjust the feet at the bottom of the unit to ensure it is level on the floor.
Step 13
Position the shelving unit against the wall. Use the wall mounting plates (114664) and suitable wall fasteners (not included) to securely attach the unit to the wall through the mounted brackets. ⚠️ Ensure the unit is stable and securely fastened to prevent tipping.
