IKEA MYDAL Bunk Bed Assembly Instructions

Required Tools and Parts

Tools: Screwdriver, Hammer.

Parts List:

• Screws (various types and quantities: 24x, 15x, 64x)
• Wooden Dowels (48x, 40x)
• Allen Keys (1x, 1x)

Assembly Steps

Step 1: Prepare the side panels. Ensure correct orientation as indicated by the finger pointing symbol. Avoid incorrect assembly shown with an 'X' symbol.

Step 2: Attach the first side panel to the base frame using screws (120209) and dowels (100514). Use the Allen key (100001) for screws. Ensure the dowels are inserted correctly.

Step 3: Attach the second side panel to the base frame using dowels (101350). Ensure correct alignment.

Step 4: Secure the slatted bed bases to the frame using screws (100514) and the Allen key (100001). Ensure the correct number of screws are used per section.

Step 5: Attach the upper side rails to the main frame using screws (101350) and dowels (100514). Ensure correct orientation.

Step 6: Attach the remaining side rails using screws (120209) and dowels (100514). Use the Allen key (100001).

Step 7: Assemble the headboard and footboard sections. Insert dowels (101350) into the designated holes. Attach the side rails to the headboard/footboard posts using screws (100514) and the Allen key (100001).

Step 8: Continue assembling the frame by attaching the remaining side rails and supports. Use screws (120208) and dowels (100514) with the Allen key (100001).

Step 9: Attach the second set of side rails to the main frame. Use screws (100514) and dowels (101350).

Step 10: Secure the upper bunk frame. Use screws (120209) and dowels (100514) with the Allen key (100001).

Step 11: Attach the ladder supports using dowels (101350) and screws (120208). Use the Allen key (100001).

Step 12: Secure the ladder structure to the bunk bed frame using screws (110719) and dowels. Use a hammer to gently tap the dowels into place, but avoid hitting the screws directly.

Step 13: Attach the slatted bed bases to both the upper and lower bunks. Use screws (110719) and dowels. Ensure all slats are correctly positioned and secured.

Step 14: Continue securing the slatted bed bases across both levels of the bunk bed.

Step 15: Attach the ladder to the bunk bed frame using dowels (101350).

Step 16: Secure the ladder to the frame using screws (130718) and dowels (100602). Use Allen keys (100001 and 100002).

Step 17: Attach the ladder to the upper bunk frame using screws (100514) and dowels (120208). Use the Allen key (100001).

Step 18: Secure the ladder to the side of the bunk bed using screws (100001) and dowels (100514).

Step 19: Attach the ladder to the frame using screws (130718) and dowels (100602). Use Allen keys (100001 and 100002).

Step 20: Secure the ladder to the frame using dowels (101350).

Step 21: Attach the ladder to the frame using screws (130718) and dowels (100602). Use Allen keys (100001 and 100002).

Step 22: Secure the ladder to the frame using screws (120208) and dowels (100514). Use the Allen key (100001).

Step 23: Attach the ladder to the frame using dowels (101350).

Step 24: Secure the ladder to the frame using screws (130718) and dowels (100602). Use Allen keys (100001 and 100002).

Step 25: Secure the ladder to the frame using screws (120208) and dowels (100514). Use the Allen key (100001).

Step 26: Final check of all connections. Ensure all screws are tightened and the structure is stable. The diagram shows hand symbols indicating points to check for stability.

Important Note: Ensure mattresses used are of the correct size (90x200 cm) and do not exceed the recommended thickness. The diagram shows a correct mattress placement and an incorrect placement with an 'X'.

Product Information

Design and Quality IKEA of Sweden.

Article Number: AA-206907-9

© Inter IKEA Systems B.V. 2005