Rossmax AM30 Bubble Air Mattress User Manual

Introduction

Thank you for purchasing the Rossmax bubble air mattress. With proper care and use, your air mattress will provide you with many years of reliable treatment. This guide book provides information on setting up and the features of your air mattress. The mattress relieves pressure by sequentially deflating and inflating alternate air cells on approximately 6-minute timed intervals. It is intended to help reduce the incidence of pressure ulcers while optimizing patient comfort and providing long-term care for patients suffering from pressure ulcers.

Attention: Consult the accompanying documents. Please read this manual carefully before use. Keep this manual for future reference.

Product Cautions

• Do not smoke on or near the pump.
• Keep the pump away from heated surfaces.
• Risk of explosion if used in the presence of flammable anesthetics.
• Never operate this product if it has a damaged cord or plug. If the product is not working properly, contact Rossmax service.
• Replace fuse as marked: T1A 250V.
• Do not use with patients who have a spinal cord injury.
• Close supervision is necessary when this product is used on or near children.
• Use this product only for its intended use as described in this manual. Do not use other mattresses not recommended by the manufacturer.
• Do not modify this product without authorization of the manufacturer.
• If you suspect an allergic reaction, please consult your physician immediately.
• Do not service or maintain the device while in use.

How to Use

1. Place the mattress on the bed frame with the hose end at the foot section of the bed frame. Secure the mattress firmly by fixing the flags to the bed frame if available.
2. Using the integrated hangers, securely hang the pump on the bed end at the foot end or place it on a smooth, flat surface.
3. Connect the air hoses from the mattress to the pump unit. Note: Check and ensure the air hoses are not kinked or tucked under the mattress.
4. Plug the pump into a wall electrical outlet. Ensure the power cord is safely away from possible hazards. Note: After installation, any extra length of power cord should be neatly arranged to avoid tripping accidents.
5. Turn on the power switch on the control panel of the pump. The pump will begin to inflate the mattress. Note: The pump should only be used with the mattress recommended by the manufacturer. Do not use it for any other purpose.
6. While inflating, adjust the pressure setting based on patient comfort level by turning the pressure adjustment knob clockwise to increase firmness. Note: It is recommended to set the pressure to maximum first, then adjust to the desired softness after setup is completed.

Clean and Disinfection

1. Wipe the pump unit with a damp cloth and mild detergent. Choose a detergent that will have no chemical effects on the plastic case of the pump unit.
2. Wipe down the mattress with warm water containing a mild detergent and air dry thoroughly before use. Note: Do not use phenolic-based products for cleaning. After cleaning, dry the mattress without direct exposure to sunlight.

Troubleshooting

Note: If the pressure level is consistently low, check for any leakage (tubes or air hoses). If necessary, replace any damaged tube or hoses or contact Rossmax service.

Specifications

Pump Unit

Mattress

Parts Identification

The pump unit features the following parts:

• 1. Control Panel: The main interface for operating the pump.
• 2. ON/OFF Switch: Powers the pump on and off.
• 3. Pressure Adjust Knob: Used to adjust the firmness of the mattress.
• 4. Hanger: Integrated hooks for hanging the pump on the bed frame.
• 5. Air Hose Port: Connection point for the air hose from the mattress.

Electromagnetic Compatibility (EMC) Information

This device must be installed and operated according to the user manual. Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the AM30. Specific guidelines and separation distances are provided based on transmitter power and frequency.

Manufacturer's Declaration - Electromagnetic Immunity: The AM30 is intended for use in a specified electromagnetic environment. The user must ensure it is used in such an environment.

Immunity Test Details:

• Conducted RF (IEC 61000-4-6): Specifies immunity levels for conducted radio frequency disturbances. Recommended separation distance calculation is provided.
• Radiated RF (IEC 61000-4-3): Specifies immunity levels for radiated radio frequency fields.

Note: Guidelines may vary based on electromagnetic propagation factors. More information is available on the Rossmax website.

Disposal Information

The symbol on this product indicates it is an electronic product. In accordance with European directive 2012/19/EU, electronic products must be disposed of at a local recycling center for safe treatment.

Warranty Information

This instrument is covered by a 1-year guarantee from the date of purchase. The mattress and accessories are not included in the guarantee. For products sold within the European Union, Rossmax acknowledges all consumer rights granted under EU Directive 2019/771 and respective national laws. The guarantee is valid only upon presentation of the warranty card completed or stamped by the seller/dealer confirming the date of purchase, or the receipt. Opening or altering the instrument invalidates the guarantee. The guarantee does not cover damage, accidents, or non-compliance with the instruction manual.

Please contact your local seller/dealer, buying source, or visit www.rossmax.com.

Customer Information:

Customer Name: ______________________________________________________________________

Address: _____________________________________________________________________________

Telephone: ___________________________________________________________________________

E-mail address: ________________________________________________________________________

Product Information:

Date of purchase: _____________________________________________________________________

Store where purchased: ______________________________________________________________________________________