YYK-Q80 Bluetooth 5.3 Earbuds
Model: YYK-Q80
Contact: after-service@kinganda.cn
Product Overview
This document provides instructions for the YYK-Q80 Bluetooth 5.3 Earbuds.
Product Sketch
The earbuds feature a microphone hole and an MFB (Multi-Function Button) on each side.
Pairing Instructions
Pairing with Phone/Tablet
- Long press the MFB button for 2 seconds to turn on. The earbuds will flash blue.
- The earbuds will flash red and blue alternately (pairing mode).
- On your phone/tablet, go to Settings > Bluetooth, turn on Bluetooth, search for "YYK-Q80", and select it to pair/connect.
Pairing with Computer/Laptop
- Open computer settings > Devices > Bluetooth & other devices.
- Turn on Bluetooth.
- Add Bluetooth or other devices, search for "YYK-Q80", and select it to pair/connect.
- Note: If your computer lacks Bluetooth, insert a Bluetooth adapter and install the driver.
Pairing with Echo Dot
- Open Alexa app > Settings > Add new devices > Bluetooth > New pairing.
- Search for devices, select "YYK-Q80", and pair/connect.
Charging Instructions
Charging the Earbuds
- Place the earbuds in the charging case. They will charge automatically.
- The right LED display on the case will flash while charging the earbuds (earbuds light up red).
- When fully charged, the red light on the earbuds will turn off, and the right LED display will turn off.
Charging the Case
- Use a Type-C charging cable to charge the case.
- The left LED display on the case will flash while charging.
- When fully charged, the left LED display will turn off.
Multi-function Button Operations
- Turn On: Take earbuds out of the case or long press MFB for 2 seconds.
- Turn Off: Place earbuds in the charging case or long press MFB for 2 seconds.
- Answer/Hang Up Call: Double-press any MFB button.
- Reject Call: Long press any MFB button for 1 second.
- Play/Pause Music: Double-click any MFB button.
- Previous Song/Volume +: Long press the left MFB button.
- Next Song/Volume -: Long press the right MFB button.
- Voice Assistant (Siri): In standby mode, long press any MFB button for 2 seconds.
Specifications
| Specification | Details |
|---|---|
| Wireless Version | V5.3 |
| Talk Time | About 6 hours |
| Music Playing Time | About 6 hours |
| Standby Time | 80 hours |
| Communication Distance | >10m |
| Headset Charging Time | About 1 hour |
| Headset Battery Capacity | 30mAh |
| Charging Chamber Battery Capacity | 300mAh |
| Frequency Characteristic | 2.40GHz-2.48GHz |
| Support Agreement | A2DP1.3/HFP1.6 HSP1.2/AVRCP1.6/D11.3 |
Waterproof Specifications
Life waterproof (e.g., sweating, raining, washing face, showering, swimming). Note: Bluetooth signals cannot be transmitted underwater.
Troubleshooting & Notices
Why can't I search for or connect to Bluetooth?
- Ensure Bluetooth is enabled on your device and the earbuds are within range (10m) and charged.
- If previously connected to another device, unpair it first.
- Restart your Bluetooth device and reset the earbuds.
- Check for environmental interference (strong magnetic fields).
- On your phone, go to Bluetooth settings, find "YYK-Q80", delete the pairing record, search again, and pair.
Why is there no sound or is the connection intermittent?
- Check your phone's network connection and speed.
- Ensure your phone is not connected to two audio devices simultaneously.
- If the connection is intermittent, ensure earbuds are within range and charged. Restarting devices and resetting earbuds may help.
- If the environment is noisy or has strong magnetic fields, it can affect Bluetooth transmission.
Why does the headset turn off automatically?
Ensure the headset has sufficient power. The earbuds will disconnect from Bluetooth after 10 minutes of inactivity.
Why can't the charging case be charged?
- Ensure the charging case and cable are in good condition and properly connected.
- Clean the charging contacts on the earbuds and inside the case if they are dirty.
- Ensure the earbuds are properly seated in the case for charging.
- Charge the case when the LED display shows "10". Avoid fully draining the battery to prolong its lifespan.
How to Reset the Earbuds
- Turn off Bluetooth on your phone and delete the "YYK-Q80" pairing record.
- Remove both earbuds from the case and manually press and hold the MFB button for 5 seconds to power them off.
- With the earbuds off, press and hold the MFB button on both earbuds simultaneously for 10 seconds. You should hear prompt tones and see red/blue lights flash twice.
- Place the earbuds back into the charging case to check if charging mode is enabled.
- Remove both earbuds again and connect them to your phone.
Safety Precautions
- Keep away from high temperatures, humidity, and corrosive environments.
- Avoid impacts, drops, bending, or soaking.
- Do not disassemble the earbuds or charging case.
- Avoid overcharging to prolong battery life.
- Discontinue use if discomfort or pain occurs.
- Use a certified DC 5V-1A adapter.
- Do not expose to sharp objects.
- Do not use during thunderstorms to prevent damage or electric shock.
- Charge and maintain regularly if not used for over a month.
- Keep away from children and pets.
Package List
- Bluetooth Earbuds x 2
- Charging Case x 1
- USB Charging Cable x 1
- Manual x 1
Warranty Information
Scan the QR code to get your 1-year warranty and learn more about operation descriptions.
Contact Information
For customer service, please email: after-service@kinganda.cn
Distributor: EVATOST CONSULTING LTD, UK
EU Representative: eVatmaster Consulting GmbH, Bettinastr.30 60325 Frankfurt am Main,Germany
Contact: contact@evatmaster.com
