⚠️ IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Introduction
NOTE! Read the instruction manual carefully before using the tool and follow all given instructions. Save the instructions for further reference.
Installation
Diagram Description: Illustration of a hose reel mechanism showing the coiled hose, retraction system, and a separate metal mounting bracket.
Diagram Description: Diagram illustrating the wall mounting process. It shows a bracket being affixed to a wall with screws, washers, and expanded nuts. Another part of the diagram shows the bracket and a tube.
Fasten the metal mounting bracket to the wall or ceiling with screws.
- Drill 4x M8 holes to match the holes located in the Mounting Bracket.
- Connect the hose reel to the Mounting Bracket with the Pivot Pin.
It is recommended to install the mounting bracket 0.8 meters from the floor.
Diagram Description: Illustration of the hose reel mounted on a wall, with a hose extended. A measurement indicates a recommended installation height of 0.8 meters from the floor. The reel features a handle and a spray regulator.
Operation
Handle: [Handle]
Regulate the spray: [Spray Regulator]
- Pull the hose. It has 2-3 lock positions every one meter.
- Please do not pull the hose when it has finished.
- Please hold the nozzle when the hose is retracting until it is finished.
Troubleshooting
Common Malfunction: The hose cannot be retracted automatically after fully extending the hose.
Possible Reason: The hose end is locked as the stop mechanism stays in the locking point, and there's no extra hose to be pulled out for a release.
Solutions:
- Hold the hose at the yellow warning mark and pull with a jerking motion until the hose retracts.
- Place the item with its right side down, pull on the hose until it retracts.
Specifications
WATER HOSE REEL
| Model | Hose length | Hose material | Working Pressure | Temperature | Outer casing material | Size of Inlet |
|---|---|---|---|---|---|---|
| XBW-01 | 20M | PVC | 8Bar | -5 C - 45 C | PP | 3/4" |
| XBW-02 | 15M | |||||
| XBW-03 | 10M | |||||
| XBW-05 | 30M |
AIR HOSE REEL
| Model | Hose length | Hose material | Working Pressure | Temperature | Outer casing material | Size of Inlet |
|---|---|---|---|---|---|---|
| XBA-01 | 20M | PVC/PU/ PU mesh | 24Bar | -5 C - 45 C | PP | 1/4" |
| XBA-02 | 15M | |||||
| XBA-05 | 30M | 8Bar | ||||
| XBA-03 | 10M |
Contact & Support
For any questions, please contact the customer care center.
US: Imported by Aosom LLC. Contact: 001-877-644-9366, customerservice@aosom.com
ES/PT: Imported by SPANISH AOSOM, S.L. Contact: 0034-931294512, atencioncliente@aosom.es / info@aosom.pt
CA/FR: Imported by Aosom Canada Inc. / MH France. Contact: 416-792-6088, customerservice@aosom.ca / 0033-1-84166106, aosom@mhfrance.fr
DE: Imported by MH Handel GmbH. Contact: 0049-0(40)-88307530, service@aosom.de
UK: Imported by MH STAR UK LTD. Contact: 0044-800-240-4004, enquiries@mhstar.co.uk
IT: Imported by AOSOM Italy srl. Contact: 0039-0249471447, clienti@aosom.it
♻️ DONNEZ OU RECYCLEZ ASSOCIATION LIVRAISON DÉCHÈTERIE
Addresses on quefairedemesdechets.fr
