Outsunny Metal Garden Shed

Introduction & Important Information

This manual provides essential information and helpful tips for a smoother and more enjoyable assembly process. Please read and understand this owner's manual thoroughly before beginning construction.

An assembly video is available; please scan the QR code provided on the first page to access it.

IMPORTANT: Retain this manual for future reference. Read carefully.

Area of Installation Requirement

A good location for the storage building is a square and level area with good drainage.

Dimensions:

• Footprint: 277cm (Length) x 117cm (Width)
• Overall Height (Front): 173cm
• Side Height: 151cm
• Roof Width: 130cm

A strong plastic sheet (thickness: at least 150µm) should be placed under the foundation to assist in reducing rising dampness from the soil, thus reducing condensation build-up in the shed. Your storage building must be anchored to prevent wind damage. Once secured, it is highly recommended to apply silicone along the inside of the base rail to minimize condensation.

Parts and Parts List

Before you start, separate and identify all the parts and hardware to ensure you have all the necessary components. If you find that a part is missing, please notify the seller within one week after receiving the product. Do not attempt to assemble the building if parts are missing, as any building left partially assembled may be seriously damaged by light winds.

Note: Please tear off the safety protection layer before assembly. Keep part number labels if needed.

Safety First!

1. Select a dry and calm day for your assembly. Teamwork (two or more people) is required.
2. Wear safety gloves, eye protection, and long sleeves to prevent injury. Pay attention to sharp edges on some parts.
3. Children and pets are not allowed on the construction site.
4. Never concentrate your total weight on the roof of the building. When using a step ladder, ensure it is safe.

Care & Maintenance

1. Keep the shed clean with a soft cloth, using water if necessary.
2. Keep door tracks clear of dirt and other debris to ensure easy sliding.
3. Clear snow with necessary tools to ensure safe entry. Heavy snow may cause collapse; ensure safety before entering.
4. The shed is not designed for living but for storing items.
5. Add oil to the top and bottom door sliding channels to make doors slide smoothly.

Assembly Steps

1. Step 01

   Assemble the base frame by connecting parts Bm-B1 and Bm-B2 using screws Bn-B51. Repeat for the other side.

   Diagram shows two Bm-B1 parts being attached to two Bm-B2 parts using screws Bn-B51.

2. Step 02

   Attach the assembled Bm-B1 and Bm-B2 sections to part Bs-A3 using screws Bn-B51.

   Diagram shows Bm-B1 and Bm-B2 sections being attached to Bs-A3 parts using screws Bn-B51.

3. Step 03

   Connect base rails Bm-B4 and Bm-B5 to part Bs-A3 using screws Bn-B51.

   Diagram shows Bm-B4 and Bm-B5 parts being attached to Bs-A3 parts using screws Bn-B51.

4. Step 04

   Attach base rail Bs-A6 to parts Bm-B4 and Bm-B5 using screws Bn-B51.

   Diagram shows Bs-A6 parts being attached to Bm-B4 and Bm-B5 parts using screws Bn-B51.

5. Step 05

   Attach vertical ribbed panels Bm-8 and Bm-A7 to the base frame using screws Bn-B51 and Bn-B53.

   Diagram shows Bm-8 and Bm-A7 panels being attached to the base frame using screws Bn-B51 and Bn-B53.

6. Step 06

   Continue attaching vertical ribbed panels Bm-A7 and Bm-8 to the base frame using screws Bn-B51 and Bn-B53.

   Diagram shows more Bm-A7 and Bm-8 panels being attached to the base frame using screws Bn-B51 and Bn-B53.

7. Step 07

   Attach vertical ribbed panels Bm-A7 and Bm-8 to the base frame using screws Bn-B51 and Bn-B53.

   Diagram shows Bm-A7 and Bm-8 panels being attached to the base frame using screws Bn-B51 and Bn-B53.

8. Step 08

   Attach vertical ribbed panels Bm-A7 and Bm-8 to the base frame using screws Bn-B51 and Bn-B53.

   Diagram shows Bm-A7 and Bm-8 panels being attached to the base frame using screws Bn-B51 and Bn-B53.

9. Step 09

   Attach vertical panels Bn-A13 to the frame using screws Bn-B51.

   Diagram shows Bn-A13 panels being attached to the frame using screws Bn-B51.

10. Step 10

    Assemble the roof rails by connecting parts Bn-B11 and Bn-B12 using screws Bn-B51.

    Diagram shows Bn-B11 and Bn-B12 rails being joined with screws Bn-B51.

11. Step 11

    Attach the assembled roof rails (Bn-B11, Bn-B12) to the vertical panels Bm-A7 using screws Bn-B50 and Bn-B51.

    Diagram shows roof rails being attached to vertical panels using screws Bn-B50 and Bn-B51.

12. Step 12

    Attach connectors Bm-B9 and Bm-B10 to the roof rail using screws T-P7 and Bn-B51.

    Diagram shows Bm-B9 and Bm-B10 connectors being attached to a roof rail with screws T-P7 and Bn-B51.

13. Step 13

    Attach connectors Bm-B9 and Bm-B10 to the vertical panels Bm-A7 using screws Bn-B50 and Bn-B51.

    Diagram shows Bm-B9 and Bm-B10 connectors being attached to vertical panels with screws Bn-B50 and Bn-B51.

14. Step 14

    Attach vertical panels Bm-A7 and Bn-A13 to the frame using screws Bn-B51 and Bn-B53.

    Diagram shows Bm-A7 and Bn-A13 panels being attached to the frame using screws Bn-B51 and Bn-B53.

15. Step 15

    Attach vertical panels Bm-A7, Bm-B1, and Bm-B2 to the frame using screws Bn-B51 and Bn-B53.

    Diagram shows Bm-A7, Bm-B1, and Bm-B2 panels being attached to the frame using screws Bn-B51 and Bn-B53.

16. Step 16

    Attach vertical panels Bm-A7, Bm-A7b, Bm-B4, Bm-B9, and Bm-B10 to the frame using screws Bn-B51 and Bn-B53.

    Diagram shows various panels and connectors being attached to the frame using screws Bn-B51 and Bn-B53.

17. Step 17

    Attach vertical panels Bm-16, Bm-A7b, and Bm-B4 to the frame using screws Bn-B51 and Bn-B53.

    Diagram shows Bm-16, Bm-A7b, and Bm-B4 panels being attached to the frame using screws Bn-B51 and Bn-B53.

18. Step 18

    Attach vertical panels Bm-17, Bm-A7b, and Bm-B5 to the frame using screws Bn-B51 and Bn-B53.

    Diagram shows Bm-17, Bm-A7b, and Bm-B5 panels being attached to the frame using screws Bn-B51 and Bn-B53.

19. Step 19

    Attach connectors Bs-A6, Bm-B4, and Bm-B5 to the frame using screws Bn-B51.

    Diagram shows Bs-A6, Bm-B4, and Bm-B5 connectors being attached to the frame using screws Bn-B51.

20. Step 20

    Attach connectors Bs-A18, Bm-16, and Bm-17 to the frame using screws Bn-B51 and Bn-B50.

    Diagram shows Bs-A18, Bm-16, and Bm-17 connectors being attached to the frame using screws Bn-B51 and Bn-B50.

21. Step 21

    Attach connectors Bn-B19b, Bn-B19c, Bm-B10, and Bm-B9 to the frame using screws Bn-B51 and Bn-B53.

    Diagram shows Bn-B19b, Bn-B19c, Bm-B10, and Bm-B9 connectors being attached to the frame using screws Bn-B51 and Bn-B53.

22. Step 22

    Attach vertical panels Bn-A21b and Bn-A21c to the frame using screws Bn-B53.

    Diagram shows Bn-A21b and Bn-A21c panels being attached to the frame using screws Bn-B53.

23. Step 23

    Attach connectors T-X29 and Bn-A56 to the frame using screws Bn-B53 and Bn-B50.

    Diagram shows T-X29 and Bn-A56 connectors being attached to the frame using screws Bn-B53 and Bn-B50.

24. Step 24

    Attach roof panels Bs-B28, Bs-B28a, and connectors T-X29 to the roof structure using screws Bn-B53.

    Diagram shows roof panels and connectors being attached to the roof structure using screws Bn-B53.

25. Step 25

    Attach roof panels Bs-B28, Bs-B28a, and connectors T-X29 to the roof structure using screws Bn-B53.

    Diagram shows roof panels and connectors being attached to the roof structure using screws Bn-B53.

26. Step 26

    Attach connectors Bn-A40 and T-X29 to the roof structure using screws Bn-B53.

    Diagram shows Bn-A40 and T-X29 connectors being attached to the roof structure using screws Bn-B53.

27. Step 27

    Attach connectors Bn-A23 to the roof structure using screws Bn-B51 and Bn-B53.

    Diagram shows Bn-A23 connectors being attached to the roof structure using screws Bn-B51 and Bn-B53.

28. Step 28

    Attach connectors Bn-A24 to the roof structure using screws Bn-B51 and Bn-B53.

    Diagram shows Bn-A24 connectors being attached to the roof structure using screws Bn-B51 and Bn-B53.

29. Step 29

    Attach connectors Bn-A24 to the roof structure using screws Bn-B51 and Bn-B53.

    Diagram shows Bn-A24 connectors being attached to the roof structure using screws Bn-B51 and Bn-B53.

30. Step 30

    Attach connectors Bn-A25 to the roof structure using screws Bn-B51 and Bn-B53.

    Diagram shows Bn-A25 connectors being attached to the roof structure using screws Bn-B51 and Bn-B53.

31. Step 31

    Attach roof supports Bm-39, Bm-B38, and Bm-B38a to the roof structure using screws Bn-B51 and Bn-B50.

    Diagram shows roof supports being attached to the roof structure using screws Bn-B51 and Bn-B50.

32. Step 32

    Attach connectors Bn-A26 and Bn-A26a to the roof structure using screws Bn-B51.

    Diagram shows Bn-A26 and Bn-A26a connectors being attached to the roof structure using screws Bn-B51.

33. Step 33

    Attach connectors BCP3 and Bn-B52 to the roof structure.

    Diagram shows BCP3 and Bn-B52 connectors being attached to the roof structure.

34. Step 34

    Attach vent covers TP5A to the structure using screws Bn-B51.

    Diagram shows TP5A vent covers being attached to the structure using screws Bn-B51.

35. Step 35

    Attach connectors Bn-B54 to the structure using screws Bn-B51.

    Diagram shows Bn-B54 connectors being attached to the structure using screws Bn-B51.

36. Step 36

    Attach base frame connectors Bn-B52 to the foundation.

    Diagram shows Bn-B52 connectors being attached to the foundation.

37. Step 37

    Assemble the left (L) and right (R) side panels using parts Bm-31, Bm-A32, Bm-A30, Bm-A35, Bs-A33, Bs-A34, Bs-A36, and Bs-A37.

    Diagram shows the assembly of two side panels (L and R) using various parts.

38. Step 38

    Attach the assembled side panels (L and R) to the base using screws Bn-B53.

    Diagram shows the assembled side panels being attached to the base using screws Bn-B53.

39. Step 39

    Attach shelf supports Bm-A32 to the side panels using screws Bn-B53 and Bn-B50.

    Diagram shows Bm-A32 shelf supports being attached to the side panels using screws Bn-B53 and Bn-B50.

40. Step 40

    Attach shelf supports Bm-A32 to the side panels using screws Bn-B51.

    Diagram shows Bm-A32 shelf supports being attached to the side panels using screws Bn-B51.

41. Step 41

    Attach shelf supports Bm-A32 and connectors Bs-A33, Bs-A34 to the side panels using screws Bn-B51.

    Diagram shows Bm-A32 supports and Bs-A33, Bs-A34 connectors being attached to the side panels using screws Bn-B51.

42. Step 42

    Attach shelf supports Bm-A32 and connectors Bs-A36, Bs-A37 to the side panels using screws Bn-B51.

    Diagram shows Bm-A32 supports and Bs-A36, Bs-A37 connectors being attached to the side panels using screws Bn-B51.

43. Step 43

    Attach connectors T-P6 to the side panels using screws Bn-B53.

    Diagram shows T-P6 connectors being attached to the side panels using screws Bn-B53.

44. Step 44

    Attach connectors T-P1 to the side panels using screws Bn-B53.

    Diagram shows T-P1 connectors being attached to the side panels using screws Bn-B53.

45. Step 45

    Attach connectors T-P2 and T-P1 to the roof structure.

    Diagram shows T-P2 and T-P1 connectors being attached to the roof structure.

46. Step 46

    Attach connectors T-P2 to the roof structure using screws Bn-B51.

    Diagram shows T-P2 connectors being attached to the roof structure using screws Bn-B51.

47. Step 47

    Assemble roof sections using parts V-A2 and V-A3.

    Diagram shows V-A2 and V-A3 parts being assembled into roof sections.

48. Step 48

    Attach roof sections using V-A3 parts and screws Bn-B51.

    Diagram shows roof sections being attached using V-A3 parts and screws Bn-B51.

49. Step 49

    Attach roof sections using V-A2, V-A3 parts and screws Bn-B51.

    Diagram shows roof sections being attached using V-A2, V-A3 parts and screws Bn-B51.

50. Step 50

    Attach final roof sections using V-A3 parts and screws Bn-B51, and Bs-A3.

    Diagram shows final roof sections being attached using V-A3 parts, screws Bn-B51, and Bs-A3. The assembly is marked as "Done".

Contact Information