Origin 21 Wall Lantern

Introduction

Thank you for purchasing this Origin 21 product. These easy-to-follow instructions are provided to help you spend your time enjoying the product rather than assembling it. For more information, visit Lowes.com, search the item number, and refer to the Guides & Documents tab on the product's page.

For questions or problems, please contact the customer service department at 1-888-251-1026 (8 a.m. - 8 p.m. EST, Monday - Sunday), or via email at partsplus@lowes.com, or visit www.lowespartsplus.com.

Preparation

Before beginning assembly, ensure all parts are present. Compare parts with the package contents list and hardware contents list. Do not attempt to assemble the product if any part is missing or damaged.

Estimated Assembly Time: 10 minutes.

Tools Required:

Visit www.lowes.com for more information.

Troubleshooting

Care and Maintenance

Ensure power is off before cleaning. Clean with a mild glass cleaner and a soft cloth. Apply liquid cleaner to the cloth; do not spray the fixture directly.

Warranty

This fixture is warranted to be free from defects in materials and workmanship for three (3) years from the date of original purchase. To obtain a Return Authorization number and further instructions, call 1-888-251-1026. The manufacturer will be liable for the replacement of the defective item and will not be liable for any other loss, damage, or injury caused by the product.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

Warning

Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.

Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Consult a qualified electrician to ensure correct branch circuit conductor.

Installation Overview

Package Contents

• Part A: Mounting Bracket (x1)
• Part B: Fixture Body (x1)
• Part C: Fixture Arm (x1)
• Part D: Glass Shade (x1)
• Part E: Bulb Socket (x1)

Hardware Contents

• AA: Junction Box Screws (x2)

Installation Steps

1. Step 1: Attach the mounting bracket (A) to the junction box using the junction box screws (AA). [Diagram shows mounting bracket being secured to a junction box with screws.]
2. Step 2: Connect fixture wires to the supply wires: black to black, white to white, and green to copper/bare. [Diagram illustrates connecting the fixture's wires to the corresponding house wires.]
3. Step 3: Select the desired color temperature. [Diagram shows a control for selecting color temperature.]
4. Step 4: Mount the fixture body (B) onto the mounting bracket (A). [Diagram shows the main fixture body being attached to the bracket.]
5. Step 5: Secure the fixture arm (C) to the fixture body (B). [Diagram shows the fixture arm being attached to the main body.]
6. Step 6: Attach the glass shade (D) to the fixture arm (C). [Diagram shows the glass shade being attached to the fixture arm.]
7. Step 7: Connect the bulb socket (E) to the fixture. [Diagram shows the bulb socket being connected or secured within the fixture.]
8. Step 8: Turn on the power to ensure the light is on. Then, caulk the space between the wall and the full area of the wall plate to prevent water seeping into the outlet box. [Diagram shows the final installation with power on and sealant being applied around the wall plate.]