Origin21 6-Light Chandelier

Welcome & Support

Thank you for purchasing this Origin21 product. These instructions are designed to help you enjoy your new fixture quickly. For more detailed information, please visit Lowes.com, search for the item number (5336413), and refer to the "Guides & Documents" tab on the product page.

If the item is no longer for sale, or if you have questions or problems, please contact our customer service department at 888-251-1026, available 8 a.m. - 8 p.m. EST, Monday - Sunday. You can also reach us at ascs@lowes.com.

Preparation

Before beginning assembly, ensure all parts are present by comparing them with the package contents list and hardware contents list. Do not attempt to assemble the product if any part is missing or damaged.

Estimated Assembly Time: 20-30 minutes.

Tools Required (Not Included): ? Screwdriver, ? Pliers.

Product Origin: Made in China

Troubleshooting

Care and Maintenance

⚠️ Shut off main power before cleaning. Clean the fixture with a damp cloth or window cleaner. Do not use abrasive cleansers.

Warranty

The manufacturer warrants this lighting fixture against defects in materials and workmanship for one (1) year limited from the date of purchase.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

Warnings

• ⚠️ Some metal parts may have sharp edges. Wear gloves when handling parts to prevent cuts and scrapes.
• ⚠️ Be aware of small parts; destroy packing material as it may be hazardous to children.
• ? Use a flashlight or alternate light source to illuminate the work area during installation.
• ? Assistance may be required to support the fixture during installation.

Cautions

• ⚡ Connect the fixture to supply wires rated for at least 167°F (75°C).
• ? This fixture is workable for dimming circuits when using appropriate dimmable light bulbs.

Installation Guide

Package Contents

• A: Mounting Bracket (x1)
• B: Mounting Screws (x2)
• C: Cap Nuts (x2)
• D: Fixture Body (x1)
• E: Chain (x2)
• F: Chain Rings (x4)
• G: Canopy (x1)
• H: Fixture Arms (x1 - part of D)
• AA: Wire Connectors (x2)
• BB: Wire Connectors (x3)

Hardware Contents

Note: Hardware shown actual size.

• AA: Wire Connectors (x2)
• BB: Wire Connectors (x3)

Installation Steps

1. ? Turn off the power and remove the existing fixture.

   Diagram Description: Shows a hand turning off a circuit breaker and removing an old light fixture.

2. Adjust the arms of the fixture body (H) evenly. Unscrew the cap nuts (C) from mounting screws (B). Attach the mounting bracket (A) to the outlet box using wire connectors (AA).

   Diagram Description: Shows adjusting the fixture arms, unscrewing cap nuts, and attaching the mounting bracket to the electrical box.

3. Diagram Description: Shows the canopy (G) and chain (E) being prepared to be attached to the fixture body (D).

4. Diagram Description: Shows the chain (E) passing through the canopy (G) and mounting bracket (A).

5. Unscrew the chain rings (F) from chain (E). Adjust chain (E) to the desired length. Use standard pliers (not included) to spread the chain links, twist in the opposite direction, and remove extra chain lengths.

   Diagram Description: Illustrates how to shorten the chain by opening and removing links.

6. Diagram Description: Shows the chain (E) being attached to the fixture body (D).

7. Feed wires through the chain.

   Diagram Description: Shows the electrical wires being pulled through the links of the chain.

8. Feed wires through the canopy.

   Diagram Description: Shows the electrical wires being pulled through the canopy.

9. Connect the wires: Twist the stripped ends of the white wire from the fixture evenly against the white wire from the outlet box. Connect the black wire from the fixture to the black wire from the outlet box in the same manner. Snip ends if necessary. Attach the copper ground wire to the ground wire from the outlet box.

   Diagram Description: Illustrates wire connections: white to white, black to black, and ground to ground.

10. Secure wire connections using wire connectors (BB).

    Diagram Description: Shows wire connectors being used to secure the electrical connections.

11. Lift the canopy (G) up over the wires and secure it in place using the previously removed cap nuts (C) onto the mounting screws (B).

    Diagram Description: Shows the canopy being positioned and secured over the mounting bracket and wires.

12. Install light bulbs (not included). Use 60-watt maximum candelabra-base incandescent bulbs or CFL/LED equivalents.

    Assembly is complete. Turn power back on.

    Diagram Description: Shows light bulbs being screwed into the sockets and a final image of the assembled chandelier.