LC-POWER LC-CC-120-DB6 CPU Cooler Manual
This document provides instructions for the installation and operation of the LC-POWER LC-CC-120-DB6 CPU cooler.
Box Content
The package includes the following components:
- 2x Intel/AMD Brackets
- 4x Intel/AMD Spacers
- 1x Intel Backplate
- 4x Intel Screws
- 4x AMD Screws
- 1x Thermal Paste
- Instruction Manual
Installation for Intel Sockets (115X/1366/1700/1851)
- Adjust the Intel backplate to your socket and mount it on the back of the mainboard through the corresponding holes.
- Place the spacer bolts on the previously attached backplate and secure the brackets with the Intel mounting screws.
- Apply the thermal paste to the CPU.
- Remove the protective foil from the bottom of the cooler.
- Place the screws of the heat sink over the openings of the brackets and tighten them alternately.
- Plug the 4-pin PWM connector of the fan into the CPU_FAN header and the 3-pin ARGB connector into a 5V_ARGB header on your mainboard.
- Plug the 9-pin USB 2.0 connector into a USB 2.0 header on your mainboard.
Installation for AMD Sockets (AM4/AM5)
- Remove the original brackets and keep the AMD backplate attached.
- Place the spacer bolts on the AMD backplate and secure the brackets with the AMD mounting screws.
- Apply the thermal paste to the CPU.
- Remove the protective foil from the bottom of the cooler.
- Place the screws of the heat sink over the openings of the brackets and tighten them alternately.
- Plug the 4-pin PWM connector of the fan into the CPU_FAN header and the 3-pin ARGB connector into one of the 5V_ARGB headers on your mainboard.
- Plug the 9-pin USB 2.0 connector into a USB 2.0 header on your mainboard.
Software Installation
To ensure the display functions correctly, a specific software must be installed. Please follow these steps:
- Download: Download the required software from the product page on the LC-POWER website at: www.lc-power.com/Ic-cc-120-db6-digi-series
- Installation: Run the downloaded file and follow the installation instructions.
- Execution: After the installation, launch the application. The display will only show the relevant information once the application is running.
Warranty Information
The manufacturer's warranty for consumers is valid for 3 years from the date of purchase. If the cooler is damaged due to improper use, the warranty expires immediately. Detailed information on general warranty conditions can be found on the LC-POWER website: www.lc-power.com
For any questions, please contact LC-POWER by e-mail at service@lc-power.com.
Manufacturer Information
Silent Power Electronics GmbH
Formerweg 8
47877 Willich
Germany