IKEA BORGEBY Coffee Table

Before You Begin

Ensure you have a clean, flat surface to work on, preferably covered with a rug or blanket to protect the furniture and your floor. Check that all parts are present before starting assembly.

Parts Included

• 12x Screws (Part Number: 139556)
• 1x Allen Key (Part Number: 100001)

Assembly Steps

1. Step 1: Attach Legs to the Base

   Place the circular base on the protected surface. Attach the four legs to the base using 8 screws (139556). Use the provided Allen key (100001) to tighten the screws. Ensure the screws are tightened securely but do not overtighten. A visual indicator shows the correct and incorrect way to insert the screw.

   Visual Description: The diagram shows the circular base with four leg brackets attached. Eight screws are used to secure the legs to the base. The Allen key is shown inserting a screw.

2. Step 2: Connect the Upper Ring

   Turn the assembled base and legs upside down. Align the upper ring with the leg brackets. Insert screws through the leg brackets into the upper ring. A circular arrow indicates the direction of rotation for assembly.

   Visual Description: The diagram shows the base and legs upside down. The upper ring is being positioned and attached to the leg brackets with screws.

3. Step 3: Secure the Upper Ring

   Using the Allen key (100001), tighten 2 screws (139556) on one side of the upper ring to secure it to the leg brackets. A visual indicator shows the correct and incorrect way to insert the screw.

   Visual Description: A close-up view shows two screws being tightened into the upper ring using the Allen key.

4. Step 4: Secure Remaining Upper Ring Connections

   Repeat the process from Step 3 for the remaining sides of the upper ring, using 2 screws (139556) for each connection. A circular arrow indicates the direction of tightening.

   Visual Description: The diagram shows the table from a different angle, with screws being tightened on the opposite side of the upper ring.

5. Step 5: Final Tightening

   Turn the table upright. Use the Allen key (100001) to tighten the remaining 12 screws (139556) connecting the upper ring to the leg brackets. Ensure all screws are firmly tightened.

   Visual Description: The diagram shows the fully assembled table. A close-up view indicates that 12 screws are used to secure the upper ring to the legs, and the Allen key is used for tightening.

Care Instructions

Wipe clean with a damp cloth. Wipe dry with a clean cloth. For best quality, re-tighten screws when necessary.