FJÄLLBO Coffee Table

General Assembly Tips

Before starting assembly, please read through these instructions carefully.

• Required tools: Screwdrivers (Phillips and flathead) ?.
• Ensure you have all parts before beginning.
• Assemble on a soft surface, like a rug or the packaging material, to prevent scratches. ❌ Do not assemble directly on hard floors.
• If you encounter any difficulties or have questions, please refer to the IKEA customer support. ?

Parts List

Assembly Steps

Step 1

Attach the side frames to the bottom shelf.

Insert the bottom shelf into the designated slots on the side frames. Secure using 4x screws (Part No. 107616).

Step 2

Attach the top frame to the side frames.

Align the top frame pieces with the upper part of the side frames. Secure using 8x screws (Part No. 152526).

Step 3

Further secure the top frame.

Continue securing the top frame to the side frames using 8x screws (Part No. 152527).

Step 4

Position the main tabletop.

Carefully place the main tabletop onto the assembled frame. Ensure it is correctly oriented.

Step 5

Secure the main tabletop.

Fasten the tabletop to the frame using 12x screws (Part No. 152497) – 6 screws on each side.

Step 6

Insert the middle shelf.

Slide the perforated middle shelf into the lower section of the frame, resting it on the support beams.

Step 7

Secure the middle shelf.

Attach the middle shelf to the frame using 4x screws (Part No. 107616).

Step 8

Attach top shelf supports.

Fix the small support brackets to the top of the side frames. Use 4x screws (Part No. 122158).

Step 9

Attach side brackets.

Secure the side brackets to the main tabletop and side frames. Use 4x screws (Part No. 107616).

Step 10

Adjust leveling feet.

Turn the feet at the bottom of the table to adjust the height and ensure stability on uneven floors. ?