MITTZON Conference Table Frame

Assembly Steps

Step 1: Prepare Base Components

Attach the metal strip (130852) to a base component using one screw (115461) and the Allen key (100001). Ensure the screw is tightened properly.

Step 2: Attach Another Component

Attach another component to the base using one screw (115461) and the Allen key (100001). Ensure the screw is tightened properly.

Step 3: Join Frame Halves

Slide the two frame parts (10095808 / 10100658) together. An audible "Click!" indicates they are properly joined.

Step 4: Attach Frame Parts to Base

Attach the joined frame parts to the main base structure. The diagram shows how the parts slot into place.

Step 5: Attach More Frame Parts

Attach additional frame parts to the base structure. The diagram illustrates the connection points.

Step 6: Insert Pins/Dowels

Insert pins or dowels into the designated holes on the base structure. Ensure correct insertion (indicated by a downward arrow ✔️) and avoid incorrect placement (indicated by a cross ❌).

Step 7: Attach Brackets

Attach the brackets (10103455 / 10103471) to the frame using screws (100108 / 100136) and the Allen key (100001). Close-ups show correct (✔️) and incorrect (❌) tightening methods.

Step 8: Secure Frame with Screws

Secure the frame further by inserting and tightening screws (100108 / 100136) using the Allen key (100001). Close-ups show correct (✔️) and incorrect (❌) tightening methods.

Step 9: Attach Vertical Legs

Attach the four vertical legs to the base structure. Arrows indicate the correct insertion points.

Step 10: Attach Connectors

Attach the connectors (10103732) to the legs using bolts (10106752), washers (130912), and the tool (100091).

Step 11: Secure Components to Legs

Attach components to the legs using bolts (105111 / 10079622) and the Allen key (100001).

Step 12: Frame Assembly Progress

The frame assembly with legs is now partially complete.

Step 13: Final Frame Tightening

Tighten all screws (100108 / 100136) on the frame using the Allen key (100001). (14 screws in total).

Step 14: Assemble Table Top Mechanism

Join the two parts of the table top mechanism. An audible "Click!" indicates they are properly connected.

Step 15: Base Structure Complete

The main base structure of the table is now assembled.

Step 16: Attach Leg Brackets

Attach the brackets (10095882) to the legs. The close-up shows how these brackets clip into place.

Step 17: Attach Horizontal Supports

Attach the horizontal support bars to the legs. Arrows indicate the direction of movement and insertion.

Step 18: Secure Table Top Supports

Attach components to the legs using bolts (105111 / 10079622) and the Allen key (100001). (4 bolts in total).

Step 19: Flip Table and Attach Table Top

With assistance, carefully flip the assembled table frame upright. Attach the metal strip (130852) to the underside of the table top using screws (100825, 10091465) and the tool (100825).

Step 20: MITTZON Table Assembled

The MITTZON conference table frame is now fully assembled.

KOPPLA Accessory Installation

Instructions for installing the optional KOPPLA power strip and cable management system.

KOPPLA Step 1: Insert Component

Insert a component of the KOPPLA unit into the central channel of the MITTZON table.

KOPPLA Step 2: Trim Plastic

Using a knife [knife icon], carefully cut away excess plastic material from the KOPPLA unit as indicated.

KOPPLA Step 3: Join KOPPLA Parts

Slide the two main parts of the KOPPLA unit together until they connect.

KOPPLA Step 4: Connect Power Cord

Insert the power cord into the designated port on the KOPPLA unit.

KOPPLA Step 5: Attach KOPPLA Unit

Attach the assembled KOPPLA unit to the MITTZON table using the brackets (10095882). The close-up shows how the brackets clip onto the table and the KOPPLA unit.