Electrolux WELL Q6/Q7/Q7-P Instruction Book
This instruction book provides essential guidance for the operation, assembly, and maintenance of your Electrolux WELL Q6, Q7, and Q7-P cordless stick vacuum cleaner.
Product Overview and Accessories
The Electrolux WELL Q6/Q7/Q7-P series offers efficient cordless cleaning. Note that accessories may vary between different models.
Included Accessories (Illustrative)
The vacuum cleaner typically includes a range of accessories for various cleaning tasks:
- Main vacuum unit with integrated handle and tube
- Floor nozzle for hard floors and carpets
- Crevice tool for narrow gaps and edges
- Upholstery brush for cleaning furniture and fabrics
- Charging stand or adapter for recharging the battery
- Detachable dustbin
- Washable filters for maintaining suction power
Assembly and Setup
Follow these steps to assemble your vacuum cleaner:
- Attach the telescopic tube to the main vacuum body. Listen for a "click" to confirm secure attachment.
- Connect the floor nozzle to the end of the telescopic tube.
- Alternatively, attach other specific nozzles or brushes as needed for different surfaces.
- If a charging stand is included, assemble and position it in a convenient location.
Operation and Charging
To begin cleaning, press the power button [ON/OFF] located on the main unit.
Charging the Battery
Connect the charger to the vacuum cleaner's charging port and plug it into a power outlet. A full charge takes approximately 4.5 hours. The battery indicator lights display the current charge level:
- [Battery icon] 100% - Fully charged
- [Battery icon] 75-100% - High charge
- [Battery icon] 50-75% - Medium charge
- [Battery icon] 25-50% - Low charge
- [Battery icon] 0-25% - Very low charge
The vacuum cleaner can be used while charging or once the battery is fully charged.
Maintenance and Care
Emptying the Dustbin
To empty the dustbin, detach it from the main unit. Open the dustbin lid and dispose of the collected debris. Ensure the dustbin is properly reattached before resuming cleaning.
Cleaning Filters
Regular filter cleaning is crucial for maintaining optimal suction power. Remove the filters from the dustbin assembly. Gently tap out loose dust. Wash the filters with clean water, ensuring the water temperature does not exceed 40°C. Allow the filters to air dry completely for at least 24 hours before reinserting them into the vacuum cleaner.
Battery Pack Handling
Handle the battery pack installation with care. For safety and optimal performance, any replacement battery pack must be obtained from Electrolux or an authorized service center.
Model Information
Model Identification:
- WELL Q6: ADS-13G-22 25013GPG
- WELL Q7/Q7-P: KSC-18W-350050HE
