Electrolux WELL Q8 / Q8-P Cordless Vacuum Cleaner Instruction Manual

Introduction

This instruction book provides essential information for the safe and effective use of your Electrolux WELL Q8 / Q8-P cordless vacuum cleaner. Please read all instructions carefully before use.

Accessories

Accessories may vary from model to model. The following are commonly depicted:

• Main Floor Nozzle: A wide head with a rotating brush, designed for cleaning floors.
• Crevice Tool: A long, narrow attachment for reaching into tight corners and gaps.
• Dusting Brush: A round brush with soft bristles, suitable for cleaning delicate surfaces like furniture or shelves.
• Other specialized nozzles may be included depending on the specific model.

Diagrams show various attachments that can be connected to the main unit or handle for different cleaning tasks.

Product Overview and Dimensions

The vacuum cleaner comprises a main unit (housing the motor and dustbin), a handle, and a telescopic tube. The main unit can be detached from the handle for handheld use or for charging.

The approximate assembled height of the vacuum cleaner is 108cm.

A charging stand is provided for convenient storage and charging.

Assembly and Usage

Assembly:

• Connect the main unit to the handle.
• Attach the telescopic tube to the main unit or handle as needed.
• Connect the desired nozzle to the end of the telescopic tube or directly to the main unit for handheld use.

Operation:

• Press the power button (?) to turn the vacuum cleaner ON or OFF.

Emptying the Dustbin:

• Press the release button to detach the dustbin.
• Open the dustbin lid and empty the contents into a trash receptacle.
• The dustbin has a [max fill line] indicator. Empty before it reaches this line.

Filter Cleaning:

• The filter is washable. Remove the filter, rinse it under cold water, and allow it to air dry completely (at least 24 hours ⏰) before reinserting.
• Do not operate the vacuum cleaner without the filter.

Charging the Battery

Place the vacuum cleaner or the main unit onto the charging stand. Ensure the charging contacts are aligned. The process is indicated by visual cues showing alignment and connection.

A full charge typically takes approximately 4.5 hours ⏰.

The battery indicator lights show the charge level:

• ■■■ 100%
• ■■ 75-100%
• ■ 50-75%
• □ 25-50%
• □ 0-25%

The battery should not be charged at temperatures above 40°C (?️).

The charging stand can accommodate the vacuum for storage. A full charge is indicated when all lights are solid.

Battery Pack Installation and Removal

⚠️ Important: Handle the battery pack with care. The new battery pack must come from Electrolux or an authorized service center.

To remove the battery pack:

1. Locate the release latches on the battery compartment.
2. Press the latches and slide the battery pack out. Visuals show pressing two latches.

To install a new battery pack:

1. Align the battery pack with the guides in the compartment.
2. Slide the battery pack in until it clicks securely into place. Visuals show aligning the battery with slots and securing it with a click.

Model Information

EU Model: KSC-18W-350050HE

China Model: KSC-18W-350050HC