Electrolux Instruction Book
WELL Q6/Q7/Q7-P
Accessories may vary from model to model.
The following accessories may be included with your vacuum cleaner:
- A brush nozzle
- A crevice tool
- A floor nozzle
- A charging stand
- A wall mount
Model Information:
- WELL Q6: ADS-13G-22 25013GPG
- WELL Q7/Q7-P: KSC-18W-350050HE
For detailed assembly and usage instructions, please refer to the diagrams below.
Assembly and Usage
Step 1: Attaching Accessories
Press the 'click' button to release or attach accessories. Ensure the accessory clicks securely into place.
Step 2: Charging the Battery
The vacuum cleaner has a battery life of approximately 4.5 hours for a full charge, indicated by the 100% light. The charging time is approximately 4.5 hours. The battery indicator shows the charge level: 100%, 75-100%, 50-75%, 25-50%, 0-25%.
Step 3: Operation
Press the 'ON/OFF' button to start or stop the vacuum cleaner. There are multiple power settings indicated by numbers 1, 2, and 3.
Step 4: Using Different Nozzles
The vacuum can be used with different nozzles for various cleaning tasks. Some nozzles may require a specific angle or connection method, indicated by arrows.
Step 5: Charging Stand and Wall Mount
The vacuum can be stored and charged using the charging stand. A wall mount is also provided for convenient storage. The charging stand can accommodate the vacuum at a height of 108cm from the floor, or it can be placed on a surface.
Maintenance and Care
Battery Pack Installation:
Handle the battery pack with care. Replacement battery packs must be obtained from Electrolux or an authorized service center.
Emptying the Dustbin:
To empty the dustbin, press the release button and detach the dust container. Dispose of the contents and clean the dustbin. The dustbin can be washed with water (Max 40°C).
Cleaning Filters:
The vacuum cleaner is equipped with washable filters. It is recommended to clean the filters regularly. The cleaning frequency is indicated as follows:
- Main filter: Clean every 1 month (1M)
- Exhaust filter: Clean every 2 months (2M)
After washing, allow the filters to dry completely for at least 24 hours (24h) before reinserting them.
Cleaning the Brush Roll:
The brush roll can be removed for cleaning. Follow the instructions to detach and reattach the brush roll. This may involve pressing release buttons (labeled 1 and 2).
Troubleshooting:
If the vacuum is not working correctly, check the battery charge, ensure the dustbin and filters are clean and properly installed, and verify that there are no blockages in the nozzles or tubes.
Storage:
Store the vacuum cleaner in a cool, dry place. It can be stored upright on its charging stand or mounted on the wall.
Important Safety Information
Battery Handling:
Do not expose the battery to high temperatures or fire. Do not attempt to disassemble or short-circuit the battery.
Usage Precautions:
Do not vacuum up sharp objects, hot ashes, or liquids. Avoid vacuuming with wet hands. Do not use the vacuum cleaner outdoors.
Disposal:
Dispose of the product and its battery according to local regulations. Do not dispose of the product with household waste.
