Tommee Tippee Food and Bottle Warmer

Important Warnings!

These instructions can also be found at www.tommeetippee.com. Keep this instruction sheet for future reference as it includes important information.

This appliance is intended for use in household and similar applications such as staff kitchen areas, offices, farm houses, hotels, motels, bed and breakfast environments. Do not use outdoors. Before plugging in, ensure the voltage is compatible with your electricity supply by checking the label on the base of the unit. Always ensure water has been added to the unit before switching it on. Do not immerse the unit in water. To protect against fire, electric shock, and injury, do not immerse the cord, plugs, or other parts of the unit in water or other liquid. Misuse of the product may result in fire, electric shock, and/or personal injury.

This appliance can be used by persons aged 14 years and above if they have been given supervision or instruction concerning use in a safe way and understand the hazards involved.

CAUTION: To prevent damage, do not use alkaline cleaning agents. Use a soft cloth and a mild detergent. Cleaning and user maintenance shall not be made by children unless they are aged 14 years and above and supervised. Keep this appliance and its cord out of the reach of children. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety. Children do not understand the dangers associated with operating electrical appliances. Never allow children to use this appliance.

The heating element surface is subject to residual heat after use. Do not touch hot surfaces; use handles and knobs. Ensure heating guidelines are followed to prevent overheating food. For your child's safety, always check food temperature before feeding by testing on a sensitive part of your skin. Take care not to overheat the milk or food. Gently agitate the bottle or jar prior to feeding.

Do not operate any appliance with a damaged cord or plug, or after it malfunctions or has been damaged. If the supply cord is damaged, it must be changed by a qualified person to avoid a hazard. Always use on a dry, flat, heat-resistant kitchen surface. Do not move the appliance when in use. Do not let the cord hang over the edge of a kitchen work surface or touch hot surfaces. The product has a cord wind on the base to adjust the cord length safely. Keep the cord as short as possible. Do not use accessories other than those supplied.

The cord must exit the cable tidy using the exit recess. If the cord is correctly placed, the product will sit level. Do not start using the product if it is not sitting level. Regularly check the cord and plug for signs of damage; if visible, remove from use immediately. The water inside the unit gets very hot and can cause burns; take care when removing items. The unit remains on unless switched off at the mains.

Usage Heating Guidelines

The speed at which the food and bottle warmer heats milk or food depends on the size of the bottle or container and its starting temperature (e.g., room temperature 20°C or from the refrigerator 5°C).

Recommended Settings:

• Setting ?: Always used for heating up.
• Setting ?: Used for keeping warm only.
• Setting ?: A MIN setting and should not be used.

MILK OR FOOD SHOULD NOT BE HEATED FOR OVER 30 MINUTES.

The guide provides an indication of the time you can expect the warmer to take. Maximum average stabilized temperature is approximately 85°C.

For Feeding Bottles

1. Place filled bottle in the food and bottle warmer.
2. Fill the food and bottle warmer with water to the inside edge using a jug or bottle (unless using a 150ml bottle). For a smaller bottle, fill to the underside of the screw ring. Never let the water overflow or rise above the neck of the bottle.
3. Before plugging in, ensure the food and bottle warmer is switched to the ? setting. Ensure your hands are dry.
4. Plug in the unit to the mains and switch the mains on.
5. Turn dial to the ? setting. The amber light will turn on to indicate the unit is switched on and heating up.
6. Once the water is heated, the amber light will switch off to indicate the thermostat will maintain the water temperature. This does not indicate that the milk is ready. Refer to the timings table for heating duration.
7. Heat the milk to the desired temperature, following heating guidelines to ensure it is not heated for too long.
8. Take care when removing the bottle, as it and the surrounding water will be hot.
9. For your child's safety, always check milk temperature before feeding by testing on a sensitive part of your skin. Take care not to overheat the milk. Gently agitate the bottle prior to feeding.
10. During feeds, the bottle can be placed back in the warmer to keep milk warm using the ? setting. The thermostat will maintain the water temperature, and the indicator light will switch to amber to indicate heating.
11. Turn the dial back to the ? setting and unplug the unit after feeding.
12. Empty the unit of any water and wipe dry.

For Baby Jars

1. Remove the lid and place the jar in the food and bottle warmer.
2. Fill the food and bottle warmer with water to the inside edge using a jug or bottle. Ensure the water level is lower than the rim of the jar.
3. Before plugging in, ensure the food and bottle warmer is switched to the ? setting.
4. Plug in the unit to the mains and switch the mains on.
5. Turn dial to the ? setting to heat up food. The amber light will turn on to indicate the unit is switched on and heating up.
6. Once the water is heated, the amber light will switch off to indicate the thermostat will maintain the water temperature. This does not indicate that the food is ready. The thermostat will maintain the water temperature, and the indicator light may switch to amber while heating.
7. Heat food to the desired temperature, following heating guidelines to ensure it is not heated for too long. Refer to the table provided.
8. Take care when removing the jar, as the surrounding water will be hot.
9. For your child's safety, always check food temperature before feeding by testing on a sensitive part of your skin. Take care not to overheat the food.
10. During feeds, the jar can be placed back in the food and bottle warmer to keep food warm using the ? setting. The thermostat will maintain the water temperature, and the indicator light will switch to amber to indicate heating.
11. Turn the dial back to the ? setting and unplug the unit after feeding.
12. Empty the unit of any water and wipe dry.

Heating Guidelines Table

Cleaning

Unplug and allow to cool before cleaning. After each use, pour away remaining water from the food and bottle warmer base by tipping it sideways over a sink and wipe clean with a damp cloth only. Do not clean with abrasive cleaners or allow to come into contact with solvents or harsh chemicals, as damage could result.

De-scaling

The frequency of de-scaling should be:

• Hard water – 7 days
• Medium – 14 days
• Soft - 21 days

You can find out your water quality from your water provider. Unplug the food and bottle warmer and allow it to cool before cleaning. After each use, pour away remaining water from the base by tipping it sideways over a sink and wipe clean with a damp cloth only. A build-up of limescale can negatively affect performance. We recommend carrying out the de-scaling process as per the frequency guidelines to ensure efficient operation. Living in a hard water area may produce limescale quicker, requiring more frequent de-scaling. Use a descaler suitable for stainless steel and follow the manufacturer's guidelines. Alternatively, use white vinegar according to manufacturer's guidelines. After de-scaling, perform a final cleaning cycle. You may need to repeat the process if limescale is still present.

DO NOT use metal objects or scourers to clean your food and bottle warmer. DO NOT use bleach. DO NOT use abrasive or anti-bacterial materials.

Contact Information

Mayborn ANZ Pty Ltd. (ABN 66 154 703 134) PO Box 475, Mt Waverley VIC 3149 AUSTRALIA

Newborn Brands (NZ) Ltd. PO Box 47-677 Ponsonby Auckland 1144 NEW ZEALAND

Mayborn Group is a business name of Mayborn ANZ Pty Ltd.

Copyright © Mayborn (UK) Limited 2018. TOMMEE TIPPEE is a registered trade mark. Made in China.

Model number: 1150. Voltage: 220-240V~ 50-60Hz 480W.

Any questions? Visit our website tommeetippee.com or call us FREE on AUSTRALIA: 1800 096 938 NEW ZEALAND: 0800 726 436