Hoftronic Dally PIR Sensor LED Pathway Light
Installation Manual
Safety Instructions
- Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
- This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical and safety regulations relevant to the country it is being installed.
- This product may NOT be installed by minors or people with a mental disability.
- This downlight must be installed to the current edition of the IEE wiring regulations and relevant building regulations in your country.
- This product is designed for indoor and outdoor use.
Intended Use / Application
Product designed for use in households and for other similar general applications.
Mounting
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.
Mounting Diagram Description: The diagram illustrates the installation of the pathway light into the ground, showing the light fixture, the ground stake, and the sensor head.
Functional Characteristics
Product can be used indoors and outdoors.
Wiring Information
Wiring Diagram Description: The diagram shows the incoming supply wires connecting to the fitting. It specifies:
- Incoming Supply: Live (brown or red), Earth (green & yellow), Neutral (blue or black).
- To Fitting: Live, Earth, Neutral terminals.
- Wire Gauge: Ø1.0-1.5mm²
- Dimensions: 20mm, 8mm
- Switch: Depicts an ON/OFF switch.
Usage Guidelines / Maintenance
- Any maintenance work must be performed when the power supply is cut off and the product has cooled down.
- Clean only with soft and dry cloths. Do not use chemical detergents.
- Do not cover the product. Ensure free air access.
- Product may heat up to a higher temperature.
- Product can only be supplied by rated voltage or voltage within the range provided.
- It’s forbidden to use the product with a damaged protective cover.
- Product must not be used in unfavorable conditions, e.g., dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
- Non-demountable product. Not suitable for independent repairs.
Environmental Protection
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
Environmental Symbol: [Recycling symbol indicating separate collection for electrical and electronic equipment]
Comments / Guidelines
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit docs.hoftronic.com/manuals. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual - the current version can be downloaded at docs.hoftronic.com/manuals.
