Pergola Gazebo Canopy SS16033BG Assembly Instructions
Before You Start
- ● The pergola will be shipped in 2 parcels. Contact customer service if any issue arises.
- ● Retain these instructions for future reference.
- ● Separate and count all parts and hardware before assembly.
- ● Read through each step carefully and follow the proper order.
- ● For convenience, assemble the items near their final intended location to avoid unnecessary movement once assembled.
- ● Always place the product on a flat, steady, and stable surface.
- ● Keep all small parts and packaging materials away from babies and children, as they can pose a serious choking hazard.
Note: This gazebo is intended for decorative and sunshade purposes only. It is not designed to withstand severe weather elements.
Please untie the ropes and remove the canopy before adverse weather conditions.
- Do not cook underneath the gazebo.
- Do not ignite fireworks underneath the gazebo.
- Keep the parts list; it may be useful for reordering parts for service if necessary.
For assistance, please contact customer service. Replacements for missing or damaged parts will be shipped promptly.
Parts List A
| Part Label | Description | Quantity |
|---|---|---|
| A | Vertical Support Pole | 4 PCS |
| H | Short Pole | 2 PCS |
| I | Short Pole with Connector | 2 PCS |
| S | Rope/Tie-down | 14 PCS |
| U | Canopy Fabric | 1 PC |
Parts List B
| Part Label | Description | Quantity |
|---|---|---|
| B | Long Curved Pole | 2 PCS |
| C | Long Pole | 2 PCS |
| D | Long Pole | 2 PCS |
| F | Long Pole | 2 PCS |
| G | Roof Support Beam | 12 PCS |
| J | Base Plate | 4 PCS |
| K | Square Base Connector | 4 PCS |
| L | Short Connector Piece | 4 PCS |
| M | Short Connector Piece | 4 PCS |
| N | Connector Bracket | 8 PCS |
| O | Connector Bracket | 12 PCS |
| P | Connector Bracket | 2 PCS |
| Q | Connector Bracket | 2 PCS |
| R | Connector Bracket | 6 PCS |
| T | Small Connector Piece | 1 PC |
| V | L-shaped Bracket | 8 PCS |
Hardware
| ID | Description | Quantity |
|---|---|---|
| 1 | M6*15 Bolt | 80 PCS |
| 2 | M6*52 Bolt | 12 PCS |
| 3 | M6*72 Bolt | 16 PCS |
| 5 | Washer | 36 PCS |
Assembly Steps
STEP 1
Attach base plates (J) to the bottom of four vertical support poles (A) using bolts (1) and washers (5). Then, attach square base connectors (K) to the top of these vertical poles (A).
STEP 2
Connect poles (D) and (F) to connector brackets (Q) using bolts (1). Connect poles (B) and (C) to connector brackets (P) using bolts (1).
STEP 3
Assemble the main frame by connecting the vertical poles (A) to the horizontal and curved poles (B, C, D, F) using the various connector brackets (N, P, Q). Secure connections with bolts (3) and washers (5) as indicated.
STEP 4
Attach the intermediate support pieces (L) and (M) between the top horizontal poles (B, F) and the vertical poles (A) using bolts (1).
STEP 5
Attach the roof support beams (G) to the connector brackets (O) and (R) using bolts (1).
STEP 6
Position the assembled roof support beams (G) onto the top of the main frame. Secure them to the horizontal poles (D, F) using bolts (2) and washers (5).
STEP 7
Drape the canopy fabric (U) over the roof structure. Secure the canopy to the roof support beams (G) and the vertical side poles (H, I) using the provided ropes (S).
STEP 8
Secure the canopy further using the ropes (S) as needed. Attach L-shaped brackets (V) to the base of the vertical poles (A) for added stability.
PLEASE NOTE: This product does not guarantee sufficient wind and rain resistance in adverse weather conditions. It is advised to untie the ropes or remove the tarpaulin to prevent unnecessary trouble, such as furniture getting wet from rainwater. Consider covering or removing the items as a feasible solution.
