AECOJOY SS16440 10'x20' Freestanding Gazebo Assembly Instructions
Thank you for choosing AECOJOY. Please carefully check the parts listed below and read this manual thoroughly before assembling your 10'x20' freestanding gazebo step by step. Contact us for any questions.
Attention & Safety
- We are committed to ensuring a positive customer experience. Please contact us if any parts are missing or damaged, or if you have any advice; we will offer an efficient solution promptly.
- Assembly is recommended for 3-4 persons.
- Use a ladder when installing the top structure.
- Keep children away during assembly. This item contains small parts that can be a choking hazard.
Parts List
Box A
- Part A: x2
- Part B: x2
- Part C: x2
- Part C2: x2
- Part D2: x6
- Part D4: x3
- Part G: x10
- Part N3: x12
- Part P: x4
- Part X: x24
- Part W: x134
- Part Z: x12
- Part Z2: x12
- Part R: x22
- Part W3: x56
- Part W2: x44
- Part Y: x16
- Part U: x2
- Part Z1: x88
- Part U1: x6
- Part X2: x44
- Part U2: x4
- Part Z5: x16
- Part Z3: x1 (Allen Wrench)
Box B
- Part A: x2
- Part F: x20
- Part P1: x4
- Part B5: x2
- Part S: x11
- Part T: x11
- Part N2: x4
- Part N: x3
- Part D: x6
- Part E: x4
Box C
- Part K1: x20
- Part E: x18
Step 1: Leg Installation
Measure the distance between the two legs (Part A) and fix the legs first for subsequent installation. This step involves attaching four leg assemblies (Part A) to base plates (Part Z5).
Step 2: Horizontal Beam Connection
Connect horizontal beams (Part C and C2) using screws (W) and connectors (N2). Ensure correct placement of screws as indicated in the diagram.
Step 3: Attaching Legs to Beams
Attach the leg assemblies (Part A) to the horizontal beams (Part C, C2) using brackets (P, P1) and bolts (Z, Z2, X). This forms the main frame structure.
Step 4: Cross Beam Assembly
Connect cross beams (Part B and B5) using bolts (W) and connectors (N). These beams add stability to the structure.
Step 5: Securing Cross Beams
Attach the cross beams (Part B/B5) to the leg assemblies (Part A) using bolts (Y). This step integrates the side supports.
Step 6: Roof Support Beams
Attach roof support beams (Part D, D2, D4) to the main frame using bolts (W) and connectors (N3). These beams will support the roof panels.
Step 7: Attaching Roof Purlins
Attach roof purlins (Part D/D2) to the main beams (Part C/C2) using bolts (W3). These run perpendicular to the main beams to support the roof panels.
Step 8: Installing Roof Panels
Attach roof panels (Part E) to the structure using connectors (S, T) and screws (W3, Z1, X2). This begins the process of covering the roof.
Step 9: Securing Roof Panels
Secure the roof panels (Part E) to the structure using bolts (W2, Z1). This ensures the panels are firmly attached.
Step 10: Placing Roof Coverings
Place the roof coverings (Part K1) onto the frame (Part G), ensuring the leakage holes are facing upwards. This step completes the roof installation.
Step 11: Final Roof Securing
Secure the roof coverings (Part K1) using brackets (R) and screws (W). This finalizes the roof structure.
Step 12: Optional Attachments
Attach any optional side components or supports (Parts U, U1, U2) as needed.
