IKEA METOD Connecting Rail Assembly

Product Overview

This document provides assembly instructions for the IKEA METOD connecting rail system, designed to join multiple METOD kitchen cabinets or panels securely.

Brand: IKEA

Product Line: METOD

Document Reference: AA-2407897-3

Parts List

The following parts are included in the package:

Connecting Rail: 2x (Part 10108265)
Screws: 6x (Part 100707)
Screws: 8x (Part 113055)
Screws: 4x (Part 10098905)
Screws: 2x (Part 151020)
Screws: 4x (Part 124694)
Screws: 2x (Part 100362)
Screws: 2x (Part 10046561)
Other small connectors/dowels as shown in diagrams.

Assembly Instructions

Step 1: Prepare Cabinets for Connection

Align two METOD cabinet boxes side-by-side. Insert the connecting rails (Part 10108265) into the pre-drilled holes or slots on the cabinet sides. Secure these initial rails using the specified screws (e.g., Parts 100707, 113055, 10098905, 151020) as illustrated. The diagrams indicate precise placement and quantities for each screw.

Step 2: Attach Main Connecting Rail

Position the primary connecting rail (Part 10108265) across the cabinet assembly. Use screws (e.g., Parts 10046561, 113055) to firmly attach the rail to the cabinet structure. Ensure it is flush and stable.

Step 3: Drilling Pilot Holes

If necessary for your specific installation, use a Ø 3.5 mm drill bit to create pilot holes. The diagrams may indicate specific locations where pilot holes are recommended for optimal screw engagement.

Step 4: Cabinet Side Panel Orientation

This step visually represents a cabinet side panel, possibly showing its correct orientation or preparation for attachment to the main structure.

Step 5: Continue Securing Components

Proceed with attaching any remaining components or reinforcing the structure. Use the provided screws to secure all connections as shown in the detailed diagrams.

Step 6: Final Assembly Check

Verify that all parts are correctly assembled and securely fastened. The final diagram shows the completed METOD unit with the connecting rail integrated.

Step 7: Measurement and Clearance Guidelines

Adhere to the specified measurements and clearances for proper installation. Key dimensions include 150 mm, 50 mm, and 26 mm. Ensure a minimum clearance of 20 cm is maintained around the unit, as indicated.

Step 8: Wall Mounting Considerations

Pay attention to the minimum clearance requirement of 20 cm, particularly if the unit is to be wall-mounted. This ensures adequate space for functionality or maintenance.

Important Information

Design and Quality: IKEA of Sweden

Document Version: 2025-07-02

Assembly Document ID: AA-2407897-3

	IKEA SEKTION Assembly Instructions Detailed assembly instructions for the IKEA SEKTION cabinet system, including parts list and step-by-step guidance for installation.
	METOD Cabinet Assembly Instructions - IKEA Step-by-step assembly instructions for the IKEA METOD cabinet system, including parts list and assembly diagrams.
	IKEA SEKTION Cabinet Assembly Instructions Detailed assembly instructions for IKEA SEKTION cabinets, covering component identification, step-by-step assembly, and hardware usage. Includes diagrams and part numbers for a clear building process.
	SEKTION Cabinet Frame Assembly Instructions Step-by-step guide for assembling the SEKTION cabinet frame by IKEA, including parts list and assembly diagrams.
	METOD Assembly Instructions \| IKEA Step-by-step assembly instructions for the IKEA METOD cabinet system. Includes parts list and diagrams for easy installation.
	METOD Floor Anchoring Frame Assembly & Safety - IKEA Essential safety warnings and assembly guide for the IKEA METOD floor anchoring frame for kitchen islands. Learn how to secure cabinets to prevent tip-overs, with component details and process overview.
	METOD Reinforced Ventilated Top Rail Assembly Instructions A comprehensive guide to assembling and installing the IKEA METOD reinforced ventilated top rail. This document details the necessary hardware, step-by-step instructions, and visual aids for proper installation of this kitchen cabinet component.
	VÅGLIG Connecting Rail for Dishwasher Fronts Assembly Instructions Step-by-step assembly instructions for the IKEA VÅGLIG connecting rail, designed to attach dishwasher fronts. Includes part lists and visual guides for various IKEA dishwasher front types.