VÅGLIG Connecting Rail for Dishwasher Fronts
IKEA logo and 'Design and Quality IKEA of Sweden' visible.
Tools and Preparation
Gather the following tools: Phillips screwdriver ? (cross symbol), flathead screwdriver ? (dot symbol), pencil ✏️, and a tape measure ?.
Illustrations show correct and incorrect assembly methods, emphasizing careful handling of parts.
A person is shown looking confused with a question mark ❓, followed by the same person on the phone with an IKEA store in the background.
Parts List
- 10x Screw (Part No. 105344)
- 14x Screw (Part No. 100344)
- 8x Screw (Part No. 144717)
- 16x Screw (Part No. 128579)
- 2x Screw (Part No. 100400)
- 2x Part (Part No. 117687)
- 4x Part (Part No. 10003587)
- 1x Rail (Part No. 10095297)
- 1x Rail (Part No. 10095316)
An information icon ℹ️ indicates that a power drill ❌ should not be used for screws; a hand is shown using a screwdriver ✔️.
Assembly Steps
Step 1
Attach the rails (10095297 and 10095316) to the base panel. Use 4x screws (100344). Ensure alignment at approximately 61 mm and 39 mm from edges as indicated.
Close-up views show the hole patterns on rails labeled 'A' and 'B'.
Step 2
Slide a panel onto the rails. Use 2x parts (117687) to secure the panel.
Step 3
Attach another panel. Use 2x screws (100344) at approximately 39 mm from the edge.
Step 4
Slide another panel onto the rails using 2x parts (117687).
Step 5
Attach a panel using 4x screws (100344) at approximately 39 mm from the edge.
Step 6
Slide a panel onto the rails using 2x parts (117687).
Step 7
Attach a panel using 4x screws (100344) at approximately 39 mm from the edge.
Step 8
Secure the rails by fastening 4x screws (105344).
Step 9
Fasten the rails with 4x screws (105344). Discard any excess screws into a trash bin ?️.
Subsequent steps (numbered 1 through 7 across multiple pages) detail further assembly, often involving the same parts and screws, with specific measurements (e.g., 39 mm, 61 mm, 24 mm, 3.5 mm, 3.0 mm) and alignment guides.
Various dishwasher front types are shown, including DISKAD PROFFSIG KALLBODA TORSBODA, HYGIENISK RENODLAD LAGAN, RENGÖRA LAGAN RÅGLANDA, GALMESÅS, VOXTORP, and UPPLÖV. These often require specific parts like 10003587, 144717, 128579, 100400, and 117687 for attachment.
Diagrams illustrate the correct orientation and placement of components, often with close-up views of screw holes and attachment points.
Icons representing different dishwasher programs (e.g., ECO, 60°, AUTO) are shown for the LAGAN model.
