IKEA SEKTION Assembly Instructions
Design and Quality IKEA of Sweden
SEKTION System Components
This document provides assembly instructions for the IKEA SEKTION cabinet system. Please ensure you have all the necessary parts before beginning assembly.
Parts Overview:
- 109566 - Connector Rail
- 124694 - Cover Panel Connector
- 151020 - Screw
- 100707 - Dowel
- 10098905 - Screw
- 10108265 - Screw
- 113055 - Screw
- 10046561 - Screw
- 100362 - Screw
Assembly Steps
Follow the diagrams carefully to assemble your SEKTION cabinets. Ensure correct orientation and secure all connections.
Step 1:
Attach connector rails to cabinet sides using screws. [Diagram shows attaching rails to cabinet panels.]
Step 2:
Connect cabinet modules using provided hardware. [Diagram shows joining two cabinet boxes.]
Step 3:
Install drawer runners and other internal fittings. [Diagram shows installing drawer slides.]
Step 4:
Attach cover panels to the sides of the cabinet structure. [Diagram shows attaching side panels.]
Step 5:
Secure the assembled cabinet to the wall using appropriate mounting hardware (not included). Ensure the cabinet is level. [Diagram shows wall mounting.]
Step 6:
Install doors and drawers. [Diagram shows attaching doors.]
Step 7:
Adjust doors and drawers for proper alignment. [Diagram shows adjusting hinges.]
Step 8:
Final checks and securing the unit. [Diagram shows final adjustments.]
Additional Diagrams:
Further diagrams illustrate specific connection details and component placements for various SEKTION configurations.
- [Diagram illustrating connection of multiple cabinet units.]
- [Diagram showing installation of internal shelving.]
- [Diagram detailing wall mounting procedures.]
- [Diagram showing placement of decorative elements or accessories.]
Important Information
Minimum clearance required for installation: 7 7/8" (20 cm).
Ensure all screws are tightened securely but do not overtighten.
Refer to the IKEA website for additional support and product information.
