ATEN CS22DP 2-Port USB DisplayPort Cable KVM Switch Quick Start Guide

Package Contents

1 x CS22DP 2-Port USB DisplayPort Cable KVM Switch
1 x User Instructions

Hardware Review

The CS22DP KVM switch features the following ports and components:

1. Micro USB Power Port: For optional external power supply.
2. Port LEDs: Indicate the status of connected computers.
3. Console Ports: Connect your keyboard, mouse, monitor, microphone, and speakers here.
4. KVM Cables: Integrated cables that connect to your computers, including DisplayPort, USB, and Audio.
5. Remote Port Selector: A separate button to switch between computers.
6. USB Keyboard and Mouse Connectors: For connecting USB keyboard and mouse.
7. DisplayPort Connectors: For connecting DisplayPort monitors.
8. Audio Connectors: For connecting microphone and speakers.

Hardware Installation

To prevent damage to your installation from power surges or static electricity, it is important that all connected devices are properly grounded. ⚡

Steps to set up the CS22DP:

Plug the USB mouse, USB keyboard, monitor, microphone, and speakers into their respective console ports (labeled 3) on the CS22DP.
Connect the DisplayPort, USB, and Audio connectors of the integrated KVM cables (labeled 4) to their corresponding ports on the computers you are installing.
(Optional) If the power supply from the connected computers to the USB peripherals is insufficient, you can connect a USB cable from the CS22DP's Micro USB Power Port (labeled 1) to another USB power source (e.g., a PC's USB port, a USB hub, or a DC 5V USB power adapter).

Note: A USB to Micro USB cable is not included in this package. Please contact your ATEN dealer for product information.

Operation

Use the Remote Port Selector button (labeled 5) to switch control between the two connected computers. ?️

Note: Long press the remote port selector button for 3 seconds to enable or disable the monitor re-detection mode on the selected PC port. ⏱️

Support and Documentation

All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior notification by the manufacturer. To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/

For technical support, visit: www.aten.com/support

EMC Information

This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

	ATEN CS22HF 2-Port USB FHD HDMI Cable KVM Switch Quick Start Guide A concise guide for setting up and operating the ATEN CS22HF 2-Port USB FHD HDMI Cable KVM Switch, covering hardware identification, installation steps, and basic usage for connecting two computers.
	ATEN CS22H 2-Port USB 4K HDMI Cable KVM Switch Quick Start Guide A quick start guide for the ATEN CS22H, a 2-port USB 4K HDMI Cable KVM Switch, detailing hardware overview, installation, and operation for seamless dual-computer management.
	ATEN CS692 2-Port USB HD KVM Switch Quick Start Guide Quick start guide for the ATEN CS692 2-Port USB HD Audio/Video KVM Switch, detailing hardware review, installation, operation, and hotkey commands for seamless computer management.
	ATEN KL1516AM KVM-Switch: 16-Port, 17-inch LCD, Cat 5, VGA, PS/2-USB - Technical Specifications Detailed technical specifications and features for the ATEN KL1516AM KVM-Switch. Learn about its 16-port capacity, 17-inch LCD display, dual-rail design, and connectivity options for efficient IT management.
	ATEN CL5708M 43cm LCD KVM Switch, USB-PS/2, VGA, 8 Port Product data sheet for the ATEN CL5708M, an 8-port, 43cm LCD KVM Switch with USB/PS2 and VGA support. This rackmount KVM solution allows users to control multiple computers from a single console and can be cascaded to manage up to 256 computers.
	ATEN CL5708M 43cm LCD KVM Switch: 8-Port USB/PS2/VGA Solution The ATEN CL5708M is an 8-port LCD KVM switch featuring a 43cm (17-inch) LCD screen and a US keyboard layout. It allows users to control multiple computers from a single PS/2 or USB console, supporting up to 256 computers when cascaded. Designed for 19-inch rack mounting, it offers space-saving functionality and advanced features like keyboard/mouse emulation, automatic port detection, and multi-level password protection.
	ATEN CL5708iN LCD KVM Switch Over IP - 8-Port, USB/PS/2, VGA, French Layout Datasheet for the ATEN CL5708iN LCD KVM over IP Switch. This 8-port device integrates a 19" LCD monitor, keyboard, and touchpad in a 1U rack-mountable design, offering both local and remote management of computers via IP. It supports USB/PS/2 and VGA connections, daisy-chaining up to 256 computers, and features a French keyboard layout.
	ATEN CL5708M 43cm LCD KVM Switch The ATEN CL5708M is an 8-port, 43cm LCD KVM switch with USB/PS2 and VGA connectivity. It allows users to manage multiple computers from a single console, featuring an integrated keyboard, touchpad, and a rotatable LCD screen. Designed for 1U rack-mountable installations, it supports daisy-chaining for expanded control.