JLab Talk GO USB Microphone
We love that you rock with JLab Audio! We stand behind our products 100%.
Your Warranty
All warranty claims must be approved by JLab Audio at its sole discretion. Keep your proof of purchase to ensure the warranty covers.
[Limited Two Year Warranty]
[U.S. Based Customer Support]
Contact Us
Contact us at support@jlabaudio.com or go to intl.jlabaudio.com/contact
Sign Up Today
For product updates, tips & tricks, and more:
Setup
-
Connect the USB-C cable to the Talk GO microphone.
Diagram shows the USB-C cable connecting to the Talk GO microphone, and the other end connecting to a computer's USB port. -
Open Settings on your PC or Mac to ensure connection.
Diagram shows a computer screen with the microphone recognized, indicated by a green checkmark ✔️. -
Install Talk GO on PC / Mac
PC Installation (Windows 7, 8, or 10)
- In the Start menu, select Control Panel.
- In the Control Panel, select the Sound icon.
- Select the Recording tab, and select JLab Talk GO.
- Select the Playback tab, and select JLab Talk GO.
Mac Installation (macOS 10.10 or later)
- Open System Preferences, and select the Sound icon.
- Select the Input tab, and select JLab Talk GO.
- Select the Output tab, and select JLab Talk GO.
- From this screen, set the output volume to the desired level.
Control Functions
Underside Controls:
- Volume Control
- Mute On/Off [Mute Button]
- Switch Recording Mode [Mode Button]
Ports & Settings:
- 3.5mm Aux Output [Headphone Jack]
- Recording Settings
- USB-C Input [USB-C Port]
- LED Indicator [Status Light]
Polar Patterns:
- Cardioid: Records sound from the front.
- Omni: Records sound from all surroundings.
In Use
Placement:
Diagram shows incorrect microphone placement. Diagram shows correct microphone placement with a checkmark ✔️.
- Talk GO works with almost all recording software installed on macOS, Windows, or Linux. Browse your software settings and adjust as needed.
- No extra drivers or software are needed for the Talk GO. Simply plug in and set up in Device Installation.
- The Talk GO cannot be used with a power bank/batteries. It only works with USB-A input from an operating system.
Shop & Resources
Shop products | Product Updates | Burn-in for Headphones
JLab Audio + Burn-in Tool
Visit us at intl.jlabaudio.com
