Nilight 5 Gang Switch Panel
Wiring Diagram
The switch panel features a 5-gang layout. The wiring diagram illustrates the connections for each switch:
- -VE (EARTH): Connected to the negative terminal of the power source.
- LOAD +: Connects to the positive terminal of the accessory being powered.
- +VE (BATTERY): Connected to the positive terminal of the power source.
A schematic shows five switches in a panel, with lines indicating connections to -VE (EARTH), LOAD +, and +VE (BATTERY).
Product View and Connections
The switch panel is shown with two different configurations:
- A panel with two switches, each with blue connectors and wires leading to them.
- A panel with five switches, also featuring blue connectors and wires. The connections are labeled:
- • -VE (EARTH)
- • +VE (BATTERY)
Disconnection Instructions
To disconnect the wiring, press down on the clips:
1. [Image: Close-up of a blue connector with a finger pressing down on a clip.]
Pressing down the clip.
2. [Image: Finger pressing down on a blue connector clip.]
Pressing down the clip.
3. [Image: Two blue connectors being pulled apart after the clips have been pressed.]
Easy disconnection.
