Hampton Bay Cambridge Rectangular Dining Table

Product Overview

Illustration: A line drawing of a rectangular dining table with a central umbrella hole and four legs.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service: 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday. Contact: 1-855-HD-HAMPTON. Website: HAMPTONBAY.COM

Thank you for choosing Hampton Bay. We appreciate your trust and confidence. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products for your home improvement needs.

Table of Contents

• Safety Information
• What is Covered
• What is Not Covered
• Warranty
• Pre-Assembly
• Hardware Included
• Package Contents
• Assembly
• Cleaning and Maintenance
• Service Parts

Important Safety Instructions

Read All Instructions Before Use

To reduce the risk of injury to persons:

1. Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
3. This table is not intended to support an umbrella. Umbrellas must have a suitable base or stand.

Set Up Your Furniture Properly

1. Ensure that all parts are assembled properly and fully tightened as per the instructions.
2. When placing in the desired location, ensure that all legs are resting on the same surface.

Examine Your Furniture

Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be re-tightened fully before additional use.

Observe Weight Limits

The weight limits for the following products are listed below:

[Caution] If you overload your furniture, injuries can occur.

Warranty

Three Year Frame, Weave and Fabric Limited Warranty

What is Covered

We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for three years. For glass table top, we warrant 30 days from the date of purchase.

What is Not Covered

This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions with similar merchandise if the model in question is no longer in production. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.

Pre-Assembly

Planning Assembly

To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly.

Hardware Included

Illustration: Two pieces of hardware are shown. AA: A bolt with a hexagonal head. BB: An L-shaped hex wrench.

Package Contents

Illustration: Two sets of items. A: A flat rectangular tabletop with a central hole. B: Four cylindrical legs.

Assembly

Step 1: Attaching the Leg to the Top

[ ] Place the table top (A) on a soft surface. [ ] Place the metal side of the legs (B) into the four holes of the top (A). The legs must be inserted as shown in the diagram. [ ] Fasten with bolts (AA) and hand-tighten.

Diagram description: Shows the underside of the tabletop (A) with one leg (B) being attached using bolts (AA). An enlarged view shows the bolt (AA) and the hex wrench (BB) being used.

Step 2: Attaching the Other Legs

[ ] Repeat step 1 for the other legs.

Diagram description: Shows the underside of the tabletop (A) with all four legs (B) being attached using bolts (AA).

Step 3: Completing the Assembly

[ ] Check and make adjustments as needed. [ ] Fully tighten all the bolts (AA) with the Hex wrench (BB). [ ] Place the table right side up. This table is now ready for your enjoyment.

Diagram description: A finished rectangular dining table with four legs, standing upright.

Cleaning and Maintenance

• Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. When not in use, store furniture in a cool, dry place.
• Do not use bleach or solvents on fabrics. When cleaning the table top, make sure to use a soft, clean cloth that does not bleed color.
• Wash the frame with a mild solution of soap and water, rinse with clean water, and dry thoroughly.
• Cushions may also be cleaned by hand with a mild solution of soap and water. Rinse the cushion cover thoroughly and allow to drip dry.
• The back cushion and pillow should be spot cleaned with a soft cloth. Do not machine wash or tumble dry, as cushions may shrink. Do not use bleach or solvents on fabrics. Never use cleaners that contain acid or abrasive materials.
• Use and operation: To improve the lifespan of this furniture, cover when not in use and store in a dry place in the off season.

Service Parts