Kasa Smart Wi-Fi Plug Slim, Energy Monitoring

About This Guide

This guide provides a brief introduction to Kasa Smart Wi-Fi Plug Slim, Energy Monitoring and regulatory information. Please note that features of Kasa Smart Wi-Fi Plug Slim, Energy Monitoring may vary slightly depending on the model and software version you have, and on your location and language. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

Conventions

In this guide, the following convention is used:

More Info

• Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com.
• Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.
• The TP-Link Community is provided for you to discuss our products at https://community.tp-link.com.

Introduction

Kasa Smart Wi-Fi Plug Slim with Energy Monitoring is a compact home device that turns your typical electrical wall outlet into a controllable, customizable, and multi-functional outlet. Keep track of your energy use and know which one is most power-hungry. Reduce unnecessary energy loss and lower your electric bills with the schedule and timer. Enable you to easily control your lights and household electronic devices via Kasa Smart app on your iOS or Android devices, no matter where you find yourself.

Note: This guide is applicable to the HomeKit version of the Kasa Smart Wi-Fi Plug Slim, Energy Monitoring.

Key Features

• Energy Monitoring: Offers more intuitive data visualizations and supports setting electricity rates to estimate energy bills.
• Auto-Off Timer: Each time the connected device is turned on, the countdown starts and the device will turn off automatically when the time runs out.
• Schedule: Turn on and off connected devices automatically at a specific time.
• Timer: Set a one-time countdown timer to turn off connected devices.
• Compact Design: Mini-sized to avoid blocking adjacent sockets.
• Voice Control: Use simple voice commands via compatible voice assistants to control the smart plug.
• Remote Control: Use Kasa Smart app to control the smart plug at anytime from anywhere.

Appearance

The Smart Wi-Fi Plug Slim has a control button to turn on/off devices plugged in, and an LED to show you the current status. For detailed information, see the explanation below:

The device features a front-facing button and an LED indicator ring.

Button Functions

LED Status Indicators

Set Up Your Smart Wi-Fi Plug

Follow the steps below to set up your smart plug via Kasa Smart app.

Step 1: Install Kasa Smart app

Get the Kasa Smart app from Google Play or the App Store, or scan the QR code to download it. [Link to App Store] [Link to Google Play]

Step 2: Log in or sign up with TP-Link ID

Open the Kasa Smart app and log in with your TP-Link ID. If you don't have an account, create one first.

Step 3: Add Device

Tap the [plus icon] button in the Kasa Smart app, select Add a Device > Smart Plugs.

Step 4: Select the correct device version

If your smart plug is Wi-Fi version, please select HomeKit Smart Plug (Wi-Fi). If your smart plug is Bluetooth version, please select HomeKit Smart Plug (BLE).

Step 5: Set up

Follow the step-by-step app instructions to complete the setup. You need to allow Bluetooth permissions if your plug is BLE version.

The app may prompt for Bluetooth permissions. [Bluetooth icon] 'Kasa' Would Like to Use Bluetooth. We only use Bluetooth to transfer data between this app and the Kasa device during setup. [Don't Allow button] [OK button]

Tip: Keep your phone or tablet close to the Kasa device throughout the setup.

[Button: ALREADY ORANGE AND BLUE] [Button: LED not blinking orange and blue?]

Add Your Device to the Apple Home App

This is a HomeKit-compatible device. You can add it to the Kasa Smart app or the Apple Home app.

Before You Start

• Your iPhone/iPad should be connected to a stable 2.4 GHz Wi-Fi network with internet access.
• Ensure your iPhone/iPad, HomeKit device, and Apple home hub* (if any) are connected to the same Wi-Fi network. (*The hub like HomePod, HomePod mini, and Apple TV helps control your HomeKit devices remotely, share the devices with others, and automate your devices to do tasks for you.)
• To control the HomeKit-enabled device in the Apple Home app, the latest iOS or iPadOS version is highly recommended.
• Find the HomeKit QR code or numeric code on your device or in its packaging. After setup, you can save the code in Device Settings in the Kasa Smart app.

How to Set Up

1. Factory reset your Kasa device.
2. Open the Apple Home app. If you have added your smart device to the Kasa Smart app, you can go to Device Settings > Add to Home in the app.
3. Scan the HomeKit QR code or enter the provided numeric setup code. [QR Code Image Description: Scan QR Code]
4. Follow the instructions in the app to complete setup.

Visit: https://www.tp-link.com/support/faq/3390/ [QR Code Image Description: Scan QR Code] For detailed troubleshooting & help [Down arrow icon]

Failed to Set Up?

• Factory reset the smart device and restart your phone. Then try again.
• Move your iPhone/iPad and the smart device closer to the router to get a stronger Wi-Fi signal.
• HomeKit setup will be disabled in 10 minutes since the smart device is powered on. You can power off your smart device, then power it on and try again.
• Creating a new home in the Home app can greatly help set up your smart device.

Contact us at www.tp-link.com/support for Technical Support, FAQs & more [Phone icon]

Authentication and Compliance

FCC Compliance Information Statement

[FC Logo Description: FC]

Product Name: Kasa Smart Wi-Fi Plug Slim, Energy Monitoring

Model Number: EP25

Responsible party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

"To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2024-07-11

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

• (1) This device may not cause interference.
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

• 1) L'appareil ne doit pas produire de brouillage;
• 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement (Canada)

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations (Canada)

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice

注意! 取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之無線電通信。

BSMI Notice

安全諮詢及注意事項

• 請按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮,請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。
• 不要私自拆開機殼或自行維修,如產品有故障請與原廠或代理商聯繫。

Restricted Substances Information

Equipment Name: Kasa Smart Wi-Fi Plug Slim, Energy Monitoring

Type Designation: EP25

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Safety Information

• Purpose of control: Operating Control
• Construction of control: Direct Plug In Type
• Type 1.B Action
• Pollution Degree: 2
• Impulse Voltage: 1500 V
• Operating ambient temperature
• Keep this instruction manual (suggestion)
• Degree of enclosure - Type 1 Enclosure
• This product is for indoor device intended for unheated/unoccupied spaces such as garages
• Information required in Marking section but not provided on the device due to limited space.
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• Devices of the same or another type not be stacked in normal use.
• To reduce the risk of electric shock - Use only indoors.
• The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.
• Do not overload power outlets. This can result in the risk of fire or electric shock.
• Completely insert the product into the power outlet. Failure to do so may cause electric shock and / or excessive heat resulting in fire.
• Unplug from the power outlet if it emits smoke, has an abnormal smell or makes an unusual noise.
• Do not use the product if the casing has been broken. Danger of electric shock.
• Never touch the product with wet hands.
• Do not use this product at a refueling point.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorized electrician.
• Be careful to connect the following:
  • cooking appliances, irons, other devices that generate a large amount of heat. There is a risk of fire, burns or injury.
  • power tools, electric machinery, or other devices that could cause injury and therefore must be used under direct careful observation.
  • heating or cooling devices or any type of device which could cause health risks particularly to the elderly or children.

Supported Load Types

Heater: ≤1500 W | Humidifier: ≤260 W | Toaster: ≤850 W | Tower Fan: ≤50 W | Iron: ≤1500 W

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Operating and Storage Temperatures

Operating Temperature: 0 °C~ 40 °C (32°F ~ 104°F)

Storage Temperature: -40 °C~ 70 °C (-40°F ~ 158°F)

Explanation of Symbols on Product Label