HOMCOM INcfa082_GL 836-430 Computer Desk Assembly & Instruction Manual
Model: INcfa082_GL / 836-430
Brand: HOMCOM
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
Using Cam Lock and Quickfit
Quickfit Tightening
Tighten the quickfit screw until its shoulder is flush with the panel. Avoid overtightening or undertightening. [✔️]
Diagram: Shows a quickfit screw being inserted and tightened until flush with the panel, marked with a checkmark. Incorrectly tightened screws are marked with a cross.
Cam Lock Orientation
When fitting the cam lock, ensure its starting position is correct before you insert the connecting quickfit. [➡️]
Diagram: Illustrates the correct orientation of a cam lock for proper engagement with the quickfit.
Panel Joining
When two panels are joined, the quickfit head should be centered within the cam lock. The cam lock should be inserted before the quickfit. [✔️]
Diagram: Depicts two panels being joined, showing the quickfit head correctly seated in the center of the cam lock.
Cam Lock Tightening
Turn the cam lock clockwise to tighten. [?]
Diagram: Shows a cam lock being rotated clockwise to secure the connection.
Parts List
| Part Number | Description |
|---|---|
| 1 | Top Panel |
| 2 | Shelf Panel |
| 3 | Shelf Panel |
| 4 | Back Support Panel |
| 5 | Left Side Panel |
| 6 | Right Side Panel |
| 7 | Support Frame |
| 8 | Support Frame |
| 9 | Support Frame |
| 10 | Support Frame |
Hardware List
M7*50 Screw (x11 + 1 spare)
Cam Lock (x2)
M6*25 Screw (x8 + 1 spare)
M6*40 Screw (x12 + 1 spare)
Foot Pad (x6)
Assembly Instructions
Step 01
Attach support frames (7, 8) to the side panels (5, 6) using screws (D x2). Ensure the frames are oriented correctly.
Diagram: Shows two vertical side panels (5, 6) with horizontal support frames (7, 8) being attached between them using screws (D).
Step 02
Attach additional support frames (7, 10) and the right side panel (6) to the existing structure using screws (D x6).
Diagram: Illustrates the assembly progressing, with more support frames (7, 10) and the right side panel (6) being secured with screws (D).
Step 03
Attach the support frame (9) to the left side panel (5) using screws (D x4).
Diagram: Shows the left side panel (5) with a horizontal support frame (9) being attached using screws (D).
Step 04
Insert and secure the shelf panels (2, 3) into the frame using cam locks (B x2) and screws (A x3).
Diagram: Depicts two shelf panels (2, 3) being fitted into the desk frame and secured with cam locks (B) and screws (A).
Step 05
Place the top panel (1) onto the assembled frame and secure it using screws (A x8).
Diagram: Shows the main desk surface (1) being positioned on top of the frame and fastened with screws (A).
Step 06
Attach the remaining shelf panels (3) to the frame using screws (C x8).
Diagram: Illustrates the final shelf panels (3) being attached to the desk structure using screws (C).
Step 07
Attach the foot pads (E x6) to the bottom of the desk legs.
Diagram: Shows the completed desk with foot pads (E) being screwed into the base of each leg.
