Introduction
This document provides comprehensive assembly instructions for the HOMCOM 920-019 Computer Desk. Please read all instructions carefully before beginning assembly. Ensure all parts and hardware are present before starting. For assistance, please refer to the contact information at the end of this manual.
Important Note: Do not fully tighten bolts until all parts are connected!
Assembly video available via QR code: [QR Code for Assembly Video]
Parts List
| Part No. | Description | Quantity |
|---|---|---|
| 1 | Base Plate | x2 |
| 2 | Foot | x4 |
| 3 | Side Leg Frame | x2 |
| 4 | Left Side Panel (Drawer Unit) | x1 |
| 5 | Right Side Panel (Main Frame) | x1 |
| 6 | Back Support Bar | x1 |
| 7 | Vertical Support | x1 |
| 8 | Keyboard Tray Support Bar | x1 |
| 9 | Keyboard Tray Base | x1 |
| 10 | Top Shelf (Drawer Unit) | x1 |
| 11 | Bottom Shelf (Drawer Unit) | x1 |
| 12 | Right Side Panel (Drawer Unit) | x1 |
| 13 | Left Side Panel (Drawer Unit) | x1 |
| 14 | Drawer Front | x1 |
| 15 | Drawer Base | x1 |
| 16 | Drawer Box Assembly | x1 |
| 17 | Drawer Slide Mechanism | x2 |
| 18 | Desktop | x1 |
| 19 | Drawer Runner (for Desktop) | x2 |
| 20 | Keyboard Tray | x1 |
| 21 | Drawer Slide Mechanism (Cabinet Side) | x2 |
| 22 | Keyboard Tray Support Bar | x1 |
| 23 | Drawer Front (Detail) | x1 |
| 24-1 | Drawer Side (Top) | x1 |
| 24-2 | Drawer Side (Bottom) | x1 |
| 25 | Drawer Back | x1 |
| 26 | Drawer Bottom | x1 |
Hardware List
| Code | Description | Quantity |
|---|---|---|
| A | 6x55mm Screw | x2 |
| B | 6x30mm Screw | x15 |
| C | 6x10mm Screw | x2 |
| D | 5x50mm Screw | x24 |
| E | 6x35mm Screw | x2 |
| F | 4x14mm Screw | x22 |
| G | 4x6mm Screw | x2 |
| H | Handle | x2 |
| J | 6x35mm Screw | x1 |
Assembly Instructions
Step 01: Prepare Drawer Slides
Attach the drawer slide mechanisms (21-A) to the drawer side panels (24-1 and 24-2). Ensure the 'Left' and 'Right' labels on the slides correspond to the correct side panels. Use screws (F) for attachment.
Step 02: Attach Drawer Slides to Side Panels
Attach the other parts of the drawer slide mechanisms (21-A) to the side panels (24-1 and 24-2). Note the 'Top' and 'Bottom' orientation for these panels. Use screws (F) for attachment.
Step 03: Assemble Drawer Box
Assemble the drawer box. Attach the drawer sides (24-1, 24-2) and drawer back (25) to the drawer bottom (26). Secure these parts using screws (D).
Step 04: Attach Drawer Front and Handle
Attach the drawer front (23) to the assembled drawer box. Use screws (E) for this connection. Then, attach the handle (H) to the drawer front (23) using screws (E).
Step 05: Attach Drawer Slides to Drawer Unit Sides
Attach the drawer slide mechanisms (21-B) to the side panels (4 and 12) of the drawer unit. Use screws (F) for this step.
Step 06: Attach Base Plates to Feet
Attach the base plates (1) to the feet (2). Secure each foot with screws (B).
Step 07: Assemble Leg Frames
Attach the side leg frames (3) to the left side panel (4) and the right side panel (5). Use screws (D) and screws (B) as indicated in the diagram.
Step 08: Attach Back Support Bar
Connect the back support bar (6) between the two assembled side leg frames (3). Secure it using screws (A).
Step 09: Attach Keyboard Tray Supports
Attach the vertical support (7), keyboard tray support bar (8), and keyboard tray base (9) to the main structure. Use screws (B) for these attachments.
Step 10: Attach Desktop and Keyboard Tray Support Bar
Attach the desktop (18) to the main desk frame. Secure the keyboard tray support bar (22) to the underside of the desktop using screw (J).
Step 11: Assemble Drawer Unit
Assemble the drawer unit by attaching the top shelf (10), bottom shelf (11), and side panels (12, 13). Use screws (D) to secure these components.
Step 12: Attach Drawer Unit to Desk Frame
Attach the assembled drawer unit to the main desk frame. Use screws (D) to fasten it securely.
Step 13: Install Drawer Components
Attach the drawer front (14) to the drawer box assembly (16) using screws (B). Attach the drawer base (15) to the drawer box assembly (16) using screws (B).
Step 14: Install Drawer Slides and Handle
Attach the drawer slide mechanisms (17) to the sides of the drawer box assembly (16) using screws (F). Attach the other end of the drawer slide mechanisms (17) to the desk side panel (4) using screws (F). Finally, attach the handle (H) to the drawer front (14) using screws (F).
Step 15: Attach Desktop to Drawer Unit
Attach the desktop (18) to the drawer unit side panel (13) and the main frame. Use screws (C) and screws (B) as shown. Ensure the drawer runners (19) are correctly positioned on the underside of the desktop.
Step 16: Final Desktop Attachment
Complete the attachment of the desktop (18) to the main desk frame using screws (B). Refer to Step 04 for initial desktop placement if needed.
Step 17: Attach Keyboard Tray
Attach the keyboard tray (20) to the keyboard tray support bars (22) using screws (G).
Step 18: Mount Keyboard Tray Assembly
Attach the assembled keyboard tray (20) to the desk structure. Use screws (F) to secure the keyboard tray supports (22) to the underside of the desktop.
Step 19: Final Keyboard Tray Installation
Slide the keyboard tray (20) onto the drawer runners (19) attached to the desktop. Secure the keyboard tray using screws (F).
[Assembly Complete]
Contact Information
- US: 001-877-644-9366, customerservice@aosom.com
- CA: 001-855-537-6088, customerservice@aosom.ca
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
- DE: 0049-(0)40-88307530, service@aosom.de
- FR: 0033-1-84166106, contact@aosom.fr
- ES: 0034-931294512, atencioncliente@aosom.es
- IT: 0039-0249471447, clienti@aosom.it
