X-Sense Motion Sensor
Model: SMS01
Introduction
The X-Sense home security system provides security monitoring and remote control of your devices via the X-Sense Home Security app. As one of the sensors within your home security system, a motion sensor will alert you to movements inside the detection area of your house. Please note that it is only compatible with the X-Sense base station SBS10.
What's Included
- Motion sensor: A small, rectangular device with a rounded top, designed for wall mounting.
- Mounting screws: Screws for securing the mounting bracket to a wall.
- Acrylic foam tapes: Double-sided adhesive strips for mounting.
- Mount: A bracket that attaches to the wall, allowing the sensor to clip onto it.
- CR123A battery: The power source for the motion sensor.
- Anchors: Wall plugs used with screws for secure mounting.
Specifications
| Model | SMS01 |
|---|---|
| Detection range | Up to 12 m (39 ft) |
| Detection angle | 110° |
| Battery | CR123A |
| Operating temperature range | 0–40°C (32–104°F) |
| Operating humidity | Up to 75% |
| Product size | 124 x 67 x 55 mm (4.9 × 2.6 × 2.2 inches) |
| Product weight | 105 g (0.2 lb) |
Device Power-Up
To power up the device, remove the battery compartment cover from the motion sensor and then remove the insulating film from the battery compartment.
Diagram Description: Shows the back of the motion sensor. An arrow indicates the battery compartment cover is being removed. Another arrow points to the insulating film inside the battery compartment being pulled out.
Device Connection
- Tap the [+] button in the X-Sense Home Security app.
- Remove the mounting bracket from the motion sensor.
- Scan the QR code on the device using the app.
- Follow the in-app instructions to add the motion sensor.
Diagram Description: Shows the back of the motion sensor with the cover removed. A hand is shown pressing a button labeled "TEST". Arrows indicate the process of removing the bracket and scanning a QR code. Another diagram shows the sensor with a light emitting from it.
Device Installation
Ensure the motion sensor faces the detection area and the field of view is not obstructed. Mount the motion sensor on a wall, 2 m (6.56 ft) above the floor.
Using Acrylic Foam Tapes:
Attach the tape to the mounting bracket. Remove the protective film and place the motion sensor on the desired wall location. Note that the mounting bracket is pre-installed to the back of the motion sensor.
Using Mounting Screws:
- Separate the motion sensor from its mounting bracket.
- Place the mounting bracket against the wall at the desired location and use a pencil to mark the hole positions. At least 2 anchor points are required.
- Drill holes at each marking. Insert anchor plugs into the holes and fix the mounting bracket to the wall with the provided screws. Clip the motion sensor back onto the bracket.
Diagram Description: Illustrates mounting the sensor using screws. Steps include marking holes, drilling, inserting anchors, and attaching the bracket, then clipping the sensor.
Device Test & Setup
Testing the Motion Sensor
Follow the instructions in the “Device Settings" menu in the app to test the motion sensor.
Note: To avoid excessive alerts, the sensor limits alerts to once every 2 minutes. This prevents the sensor from responding to motion within 2 minutes of a previous alert.
Setting Up the Motion Sensor
- Sensor Sensitivity Settings: Depending on your desired level of detection, you can adjust the sensitivity level from Level 1 (lowest) to Level 5 (highest).
- Personalized Settings: You can change various settings, including the sensor and room name, and notification sounds, all within the app.
LED Indicator
| LED Color | Meaning |
|---|---|
| Red | The device is not connected to the base station. |
| Blue | The device is connected to the base station. |
Warranty
Thank you for purchasing this product. X-Sense provides a 1-year worry-free guarantee from the date of purchase. If you have any questions, please contact the dealers or distributors in your region. They will respond within 1-3 working days.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with local authorities or retailers for recycling advice.
Symbol Description: A symbol indicating proper disposal of electronic waste, typically a crossed-out trash bin with recycling indicators.
