X-Sense Home Security Kit User Manual
Your Trusted Home Safety Innovator
Introduction
The X-Sense Home Security Kit provides security monitoring and remote control of your home devices via the X-Sense Home Security app. It includes a series of devices such as a base station, motion sensors, entry sensors, and remote controls. When certain activities are detected, the base station will set off an alarm and send instant notifications to alert you as soon as possible. To get started, please refer to the Quick Start Guide card included with the packaging.
System Components
Base Station
The base station is the hub of your X-Sense home security system. It connects your devices to the X-Sense Home Security app, through which you can control your home security anywhere and anytime.
Specifications:
| Model | SBS10 |
| Max connected devices | Up to 32 sensors and 6 remote controls |
| Power supply | AC 110-120 V/60 Hz |
| Backup battery | 1800 mAh Li-ion battery, 12-hour power supply |
| Radio signal range | Up to 1 1/4 miles (2000 m, without obstruction) |
| Operating temperature range | 32-104°F (0-40°C) |
| Operating humidity | Up to 75% |
Base Station Functions:
- Wi-Fi connection: Press and hold the button for longer than 10 seconds until the LED indicator turns green. Keep the base station powered on during this time.
- Alarm shutoff: Press the button to silence an alarm.
- Base station shutdown: Disconnect the base station from the power source, then press and hold the button until the LED indicator light turns off. Otherwise, the backup battery will turn on, which will affect battery life.
LED Indicator Colors:
- Red: An alarm has been triggered.
- Green: The base station is connecting to Wi-Fi.
- Blue: The base station is connected to Wi-Fi.
- Yellow: The base station is unable to connect to Wi-Fi.
Setting Up a Base Station: Customize the base station sound and brightness level in the app to meet your personal preference. You can also create names for each sensor installed and the rooms they are installed in.
Motion Sensor
The motion sensor alerts you to movement within the detection area of your home.
Specifications:
| Model | SMS01 |
| Detection range | Up to 39 ft (12 m) |
| Detection angle | 110° |
| Battery | CR123A |
| Operating temperature range | 32-104°F (0-40°C) |
| Operating humidity | Up to 75% |
Installation:
- Install the device 6.56 ft (2 m) above the floor in a corner or on a flat wall.
- Ensure the device faces the detection area, and that the field of view is not obstructed.
- Install the device inside (not outside) and keep it away from heat sources such as a stove or a window under direct sun.
- Adjust the sensor sensitivity within the app to reduce unwanted alarms caused by pets or children. Make sure your pets cannot get close to the motion sensor.
Mounting Options:
- Using Mounting Screws: Remove the mount, place it, mark holes, drill, insert anchors, fix mount with screws, clip sensor onto mount.
- Using Acrylic Foam Tapes: Attach tape to mount, remove film, place sensor on wall.
Testing: Test the motion sensor by following the instructions in the "Motion Sensor Settings" menu in the app.
Settings:
- Sensor Sensitivity Settings: Adjust sensitivity from Level 1 (lowest) to Level 5 (highest).
- Personalized Settings: Change Sensor and Room Name, Notification Sound in the app.
LED Indicator:
- Red: The device is not connected to the base station.
- Blue: The device is connected to the base station.
Entry Sensor
The entry sensor alerts you when a door or window in your home is opened.
Specifications:
| Model | SES01 |
| Detection threshold | ≤ 1 inch (2.5 cm) |
| Battery | CR123A |
| Operating temperature range | 32-104°F (0-40°C) |
| Operating humidity | Up to 75% |
Installation:
- Mount the entry sensor using the provided tapes or mounting screws.
- Place the sensor magnet on your door or window and the sensor on the doorframe or window frame.
- Ensure the gap between the sensor and sensor magnet is not more than 1 inch (2.5 cm) when the door or window is closed.
- Rotate the sensor magnet to face the sensor at the proper angle if needed.
Settings: You can change various settings from the app, including the Sensor and Room Name, and Notification Sound.
LED Indicator:
- Red: The device is not connected to the base station.
- Blue: The device is connected to the base station.
Remote Control
The remote control allows you to switch between the Home, Away, and Disarm modes without directly operating on your devices. Additionally, you can press the SOS button to call for help in an emergency.
Specifications:
| Model | SKF01 |
| Battery | CR2032 (Replaceable) |
| Radio signal range | 656 ft (200 m) |
| Operating temperature range | 32-104°F (0-40°C) |
| Operating humidity | Up to 75% |
Operating Modes:
- Home: Press and hold the Home button for 3 seconds.
- Away: Press and hold the Away button for 3 seconds.
- Disarm: Press and hold the Disarm button for 3 seconds.
- SOS: Press and hold the SOS button for 5 seconds.
Note:
- If the security mode is successfully changed, the LED indicator on the remote control will flash blue twice. If not, it will flash red twice.
- If the SOS function is successfully activated, the LED indicator on the remote control will flash blue for 3 seconds and the base station will alarm. If not, it will flash red twice and the base station will not alarm.
LED Indicator:
- Red: The device is not connected to the base station.
- Blue: The device is connected to the base station.
Setting Up Your Security Layout
Follow the example diagram below or design your own layout to create a household security system. Note that the base station should be placed where you can easily interact with it.
Diagram Description: A floor plan illustrating ideal placement for the base station in a central location, motion sensors in corners or on walls, and entry sensors on doors/windows.
Sign Up the X-Sense Home Security App
To download the X-Sense Home Security app, scan the QR code below or search for "X-Sense Home Security" in the Apple App Store or Google Play Store.
Once downloaded, create an account using a valid email address. If you already have an account with X-Sense, log in using the most recent version of the app. For proper setup, you will need a smooth, steady internet Wi-Fi connection.
If you encounter any issues during setup or operation, please refer to the “Help & Feedback" section in the app.
App Stores: Apple App Store, Google Play Store.
Set Up Your Base Station
Before you begin, make sure your router supports a 2.4 GHz Wi-Fi network and that the Bluetooth on your phone is enabled.
Familiarize Yourself with the Security System
Security Modes
The X-Sense home security system has 3 modes to choose from: Disarm, Home, and Away. You can easily switch between these modes through the app or by using a remote control.
The default system settings for each mode are listed below. You can choose which sensors are armed or disarmed in each mode, as well as customize mode options for each sensor.
- Disarm: The system is disarmed, and all sensors are disabled. This mode is used when you are at home and/or want to move in or out freely.
- Home: The system is armed, but sensors will not alarm by default. You can customize the sensor functions for this mode within the app.
- Away: The system is armed by default, and all sensors will alarm when activity is detected. You can control your home security and set up individual sensor settings within the app.
Delay Functions
Exit Delay
The exit delay gives you the time to leave the monitored area without triggering an alarm when the system is armed. If the exit delay is on and you leave the monitored area within the set delay time, the alarm will not sound.
Exit delay is disabled by default for each mode. You will need to set up a delay time ranging from 0 to 300 seconds within the app.
Entry Delay
The entry delay gives you time to get inside the monitored area while the system is armed and manually disarm the alarm. Be sure to disarm the system within the set delay time to avoid triggering an alarm.
Entry delay is disabled by default for each mode. You will need to set up a delay time ranging from 0 to 300 seconds within the app.
Additional Functions
- Receive instant notifications on your phone when activity in the detected area is captured by the sensors. Make sure you allow push notifications to be sent to your phone from the app.
- Invite up to 12 trusted people to help manage your security system. Added users can arm and disarm the system but cannot change sensor settings.
FCC Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult a dealer or experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Warranty & Service
X-Sense provides customers with a 30-day refund policy, a 12-month warranty, and lifetime technical support. Any material related to X-Sense Home Security may not be up to date when received. For help or any questions, please contact us at support@x-sense.com.
Environmental Protection
Waste electrical products should not be disposed of with regular household waste. Please recycle where facilities exist. Check with local authorities or retailers for recycling advice.
[Recycling Symbol]
