FNIRSI DMC-100 Digital Clamp Meter
Product Link: https://www.gotronik.pl/dmc-100-cyfrowy-inteligentny-miernik-cegowy-1000v-600a-acdc-fnirsi-p-12732.html
Product Overview
The FNIRSI DMC-100 is a versatile digital clamp meter that combines the functionality of a classic multimeter with precise AC/DC current measurement up to 600A. The device features a 2.0" color TFT display with a resolution of 240 x 320 pixels, ensuring clear readability of results in all conditions. With a wide range of measurements for voltage, resistance, capacitance, and frequency, this meter is suitable for both electrical installation diagnostics and service work. It is powered by a 1500mAh lithium battery, rechargeable via a USB Type-C port, guaranteeing long operating time without the need for battery replacement.
Image Description: The FNIRSI DMC-100 clamp meter is a handheld device with a black body and a prominent clamp mechanism. The clamp jaws are open, showing metal contacts. The front panel has a large, rectangular color TFT display showing readings like 'A=' and '-0.230 A', along with indicators for MAX, MIN, Ω, Hz, LIVE, CAT. III 1000V, and MAX 1000V. Below the display are circular and linear control buttons for functions like HOLD, MODE, SAVE, and MENU. The FNIRSI logo is visible on the device. Input ports labeled 'COM' and 'INPUT' are located at the bottom.
Basic Parameters
| Parameter | Value |
|---|---|
| Manufacturer | FNIRSI |
| Model | DMC-100 |
| Display | 2.0" color TFT display, 240 x 320 pixels |
| Power Supply | USB Type-C 5V/1A, 3.7V 1500mAh lithium battery |
| Max Jaw Opening | 25 mm |
| Product Dimensions | 193 x 74 x 32 mm |
| Weight | 194 g |
| Temperature Units | °C/°F |
Technical Measurement Data
| Measurement Type | Range |
|---|---|
| DC Voltage | 9.999V / 99.99V / 999.9V |
| AC Voltage | 9.999V / 99.99V / 750.0V |
| DC Current | 99.99A / 600.0A |
| AC Current | 4A / 40A / 600.0A |
| Resistance | 99.99MΩ / 9.999MΩ / 999.9KΩ / 99.99KΩ / 9.999KΩ / 999.9Ω 400Ω / 4KΩ / 40KΩ / 400KΩ / 4MΩ / 40MΩ |
| Capacitance | 9.999mF / 99.99mF / 999.9µF / 9.999µF / 999.9µF / 99.99nF / 9.999nF |
| Frequency | 9.999MHz / 999.9KHz / 99.99KHz / 9.999KHz / 999.9Hz / 99.99Hz / 9.999Hz |
| Temperature | -55 ~ 1300°C / -67 ~ 2372°F |
Measurement Functions
- Continuity Test: Yes ✔️
- Diode Measurement: Yes ✔️
- Non-Contact Voltage Detection (NCV): Yes ?
- Phase Wire Detection: Yes ⚡
- Measurement Modes: General measurement, waveform display, power measurement
Additional Functions
- Measurement Mode: Manual range adjustment ⚙️
- Data Zeroing: Yes ✔️
- Waveform Display: Yes ▶️
- Data Hold: Yes ?
- Brightness Adjustment: 10 levels
- LED Flashlight: Yes ?
- Max/Min Value Measurement: Yes ?
- Power Calculation: Yes ?
- Data Storage: Up to 30 measurement groups
- Auto Power Off: Configurable (OFF, 5 min, 15 min, 30 min)
- Software Update: Yes ?
- Languages Supported: Chinese, English
Set Includes
- 1x FNIRSI DMC-100 clamp meter
- 1x User Manual ?
- 1x Original packaging ?
- 1x USB-C charging cable ?
- Set of test leads ?
- 1x Temperature probe ?️
