Product Overview
This document provides the original instructions for VEVOR Leather Bedroom Benches. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notification for technology or software updates.
Safety Instructions
WARNING:
Read this material before using this product. Failure to do so may result in serious injury.
Assembly Precautions:
- Assemble only according to these instructions. Improper assembly may create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble if tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the Leather Bedroom Benches.
- If possible, use power tools to make assembly easier.
- For additional information regarding the parts listed, please refer to the Assembly Diagram. Unwrap and separate all parts in a clean work area.
Use Precautions:
- Do not exceed specified weight capacities.
- Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded Leather Bedroom Bench.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
Parts List
The following parts are included:
- Part A: Bench Top (1 unit)
- Part B: Legs (4 units)
- Part C: Screws, M6*25mm (12 units)
- Part D: Allen Wrench (1 unit)
- Spare Parts: Screw, M6*25mm (1 unit)
Assembly Steps
Step 1:
Attach the four legs (Part B) to the underside of the bench top (Part A). The legs are designed to screw into pre-drilled holes.
Step 2:
Secure each leg by inserting screws (Part C) through the designated holes and tightening them using the Allen wrench (Part D). Ensure all screws are firmly tightened.
Step 3:
The Leather Bedroom Bench is now fully assembled and ready for use.
Product Parameters
| Parameter | CWD0115CA-KD-BROWN | CWD0115CA-KD-BLACK | CWD0115CA-KD-GREEN |
|---|---|---|---|
| Main Color | Brown | Black | Green |
| Safe Loading Weight | 660 lbs | ||
| Product Size (D*W*H) | 400*1200*450mm | ||
| Net Weight | 12kg | ||
* Products such as specifications, appearance, and design are subject to modification without prior notice.
Manufacturer and Importer Information
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
European Representative: E-CrossStu GmbH, Mainzer Landstr.69, 60329 Frankfurt am Main.
UK Representative: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
