eWeLink WiFi Water Valve User Manual

Software Download and Connection

1. Download the Application

Search for "eWelink" in the App Store or Google Play Store. Alternatively, scan the QR code below to download and install the application.

App Store Download: [App Store icon] Download on the App Store

Google Play Download: [Google Play icon] Get it on Google Play

QR Code for Download: [QR code image description - eWeLink app download]

Please grant all necessary permissions during the app installation. After installation, register an account and log in.

2. Powering On the Device

Upon first power-on, the device will automatically enter Quick Mode. The Wi-Fi indicator will blink twice briefly and once long. If the device does not connect to the network within three minutes, it will exit Quick Mode automatically. To re-enter Quick Mode, press and hold the button on the device for more than 5 seconds until the Wi-Fi indicator starts blinking twice briefly and once long again.

3. Adding the Device

1. Tap the "+" button and select "Quick Add". Ensure GPS and Bluetooth are enabled on your phone/tablet.
2. Enter the Wi-Fi password for the network your phone or iPad is currently connected to.
3. After adding, name your device. This name can also be used for voice control. Once the device is connected to Wi-Fi (indicator light is solid), it can be controlled remotely.
4. On the app's home screen, tap the switch icon to turn the device on or off with a single click. If you control the device manually, the app will display its current status (on/off) in real-time.