C1BIR24TK INSTALL GUIDE
DIMENSIONAL RENDERINGS
Dimensional Diagrams
A front elevation diagram shows the overall product dimensions and the required cutout dimensions. The overall unit has a height of 34 1/4 inches and a width of 25 3/4 inches. The cutout requires a height of 33 1/4 inches and a width of 23 3/4 inches.
A side elevation diagram illustrates the cutout depth and the standard countertop height. The cutout depth is 1 inch. The typical height from the floor to the countertop is 36 inches.
A perspective view shows the general frame and structure of the unit.
Overall Product Dimensions
| Model No. | Height | Width | Depth |
|---|---|---|---|
| C1BIR24TK | 34 1/4" | 25 3/4" | 1" |
Cutout Dimensions for Island
| Model No. | Height | Width | Depth |
|---|---|---|---|
| C1BIR24TK | 33 1/4" | 23 3/4" | 1" |
Install Notes
- 2 anchor points are located on each side of the trims interior frame (top, left and right).
- Due to wide variance of possible building materials, anchors are not included.
- When inserting your anchors, be sure to use a framing square to ensure the door is not pulled out of square.
- Additional framing and/or support underneath the rear (hanging portion) of the cabinet is recommended.
- These specs are accurate, but it is always suggested to have the product physically on site to ensure full understanding of how this product will coordinate with your build.
