Bosch DINION 3100i IR Quick Installation Guide

Product Models

This guide applies to the following Bosch camera models:

• NBE-3702-AL
• NBE-3703-AL
• NBE-3702-AL-GOV
• NBE-3703-AL-GOV

Installation Steps

Follow these steps for the installation of your Bosch DINION 3100i IR camera:

1. Step 1: Prepare the Camera

   Exploded view showing the camera body, mounting base, and various screws and accessories. Indicates the order of assembly.

2. Step 2: Mount the Base Plate

   Illustration of attaching the circular base plate to a surface using screws. Shows different screw types (A and B) and their placement.

3. Step 3: Connect Cables and Mount Camera

   Diagram showing the connection of cables (PoE, RESET) to the camera and mounting the camera body to the base plate using screws (TR20). Includes a detail of the reset button.

4. Step 4: Secure the Camera

   Shows the camera mounted to the base plate with screws. Details on cable management and securing the camera body.

5. Step 5: Adjust Camera Angle

   Illustrates the camera's adjustable joints, indicating 180° and 90° rotation capabilities. Shows how to tighten or loosen screws (A and B) to adjust the camera's position.

6. Step 6: Final Adjustments

   Depicts further adjustments to the camera's orientation, showing 360° rotation and 180° tilt. Details on using screws (A and B) for adjustment.

7. Step 7: Install Protective Cover

   Shows the installation of a protective cover over the camera lens and body, secured with screws.

8. Step 8: Final Mounting

   Illustrates the final mounting of the camera, with screws securing it to the bracket. Shows adjustment screws (A and B).

9. Step 9: Orientation Adjustment

   Detailed diagrams showing how to adjust the camera's pan (180°), tilt (90°), and rotation (360°) using adjustment screws labeled A and B.

10. Step 10: Cable Management and Mounting

    Shows the camera mounted, with emphasis on routing and securing cables. Includes adjustment screws (A and B).

11. Step 11: Final Camera Placement

    Illustrates the final placement and adjustment of the camera, showing how to secure the housing and adjust the angle using screws (A and B).

12. Step 12: Final Assembly

    Depicts the fully assembled camera, ready for operation, with adjustment screws (A and B) shown.

Contact Information

Bosch Security Systems B.V.

Torenallee 49

5617 BA Eindhoven

Netherlands

Website: www.boschsecurity.com

© Bosch Security Systems B.V., 2024

Building solutions for a better life.