Bosch DINION IP 3000i IR Camera Installation Guide
Models: NBE-3502-AL, NBE-3503-AL
This guide provides essential steps for the physical installation of the Bosch DINION IP 3000i IR network camera.
Installation Procedure
The installation process involves mounting the camera and connecting it to power and network. Tools required include a Phillips head screwdriver (PH1) and a Torx T15 screwdriver (TR15).
-
Step 1: Identify Components
Unpack the camera, mounting bracket, and junction box. Identify all included screws and tools.
Visual Description: Shows the camera unit, mounting bracket, junction box, screws (PH1 x4, TR15), and a small box.
-
Step 2: Assemble Bracket and Junction Box
Attach the junction box to the mounting bracket using the provided screws (e.g., PH1 x4, TR15).
Visual Description: Shows the junction box being affixed to the mounting bracket with screws.
-
Step 3: Prepare Wiring
Make the necessary internal wiring connections within the junction box, such as for power and network cables.
Visual Description: Illustrates connecting wires inside the junction box.
-
Step 4: Attach Camera to Bracket
Connect the camera unit to the assembled bracket and junction box. Ensure it is properly seated.
Visual Description: Shows the camera being attached to the bracket assembly.
-
Step 5: Connect Cables to Camera
Connect the power and network cables to the camera's ports. Ensure cables are routed correctly.
Visual Description: Depicts connecting cables to the camera body.
-
Step 6: Secure Camera to Bracket
Use the TR15 screwdriver to fasten the camera securely to the mounting bracket.
Visual Description: Shows tightening screws with a TR15 driver to fix the camera onto the bracket.
-
Step 7: Adjust Camera Angle
Loosen the adjustment screws on the bracket to allow for pan, tilt, and swivel adjustments. Position the camera for the desired field of view.
Visual Description: Illustrates loosening screws and manually adjusting the camera's angle.
-
Step 8: Lock Camera Position
Once the optimal camera angle is set, tighten the adjustment screws to lock the camera in place.
Visual Description: Shows tightening the adjustment screws to secure the camera's position.
-
Step 9: Install SD Card (Optional)
If local storage is required, insert a microSD card into the SD card slot on the camera body.
Visual Description: Shows an SD card being inserted into a slot labeled "SD".
-
Step 10: Connect Camera Cables (Confirmation)
Connect the power and network cables to the camera's ports. This step visually confirms cable connections after initial assembly.
Visual Description: Depicts connecting cables to the camera, similar to Step 5, confirming connections.
-
Step 11: Mount Bracket to Surface
Select a suitable mounting location (wall, ceiling) and securely attach the mounting bracket using appropriate hardware.
Visual Description: Depicts the mounting bracket being fixed to a surface.
-
Step 12: Attach Camera to Mounted Bracket
Align the camera assembly with the securely mounted bracket and attach it. This step may involve a click mechanism or screws.
Visual Description: Shows the camera assembly being connected to the bracket already fixed to the wall.
-
Step 13: Final Adjustments
Perform any final adjustments to the camera's view.
Visual Description: Illustrates final positioning of the camera.
-
Step 14: Secure Installation
Tighten all securing screws to ensure the camera is firmly and stably installed.
Visual Description: Shows tightening screws to finalize the installation.
