Product Introduction
The MOES ZSS-S01-TH is a Zigbee 3.0 temperature and humidity sensor designed to detect and report environmental changes to a mobile application. Users can view current and historical data. The sensor can be placed freely or mounted using adhesive. It can integrate with a Zigbee gateway to control other smart home devices like smart air conditioning, humidifiers, and fresh air systems.
Warnings
- Do not disassemble, modify, or attempt to repair the product. Authorized professionals should perform such work.
- Recycle product batteries separately from household waste according to local environmental regulations.
Preparation for Use
Download MOES App
Download the MOES App from the App Store or scan the provided QR code. The MOES App offers enhanced compatibility and features compared to Tuya Smart/Smart Life apps, including Siri control, widgets, and scene recommendations. While Tuya Smart/Smart Life apps are still functional, MOES App is highly recommended.
Registration or Log In
Open the MOES Application. Navigate to the Register/Login interface. Tap "Register" to create an account using your phone number for verification and setting a password. If you already have an account, select "Log in".
Adding the Device
Install Battery and Enter Pairing Mode
1. Slide the rear cover in the direction of the arrow, remove it, take out the insulation sheet, and then reinstall the rear cover. Removing the insulation sheet powers on the sensor.
[Diagram Description: A small white insulation sheet is shown being removed from the device's battery compartment.]
Connect to Gateway and Add Device
2. Open the MOES App. Ensure your Zigbee gateway or multimode gateway is connected to the app. Enter the gateway interface and click "Add New Device".
Enter Configuration Mode
3. Press and hold the device's button for more than 6 seconds until the white indicator light flashes quickly. This indicates the sensor has entered pairing mode. Keep the device close to the gateway during network configuration. If pairing fails, repeat the process.
[Diagram Description: A small button on the device is indicated with text stating "Long press button for 6 seconds to start pairing with indicator flashing continuously".]
Complete Setup
4. Wait for 10-120 seconds. Once the device is successfully added, you can edit its name.
5. Configure "smart scene linkage" as needed to enjoy your smart home experience.
Installation Instructions
Method 1: Placement
Simply place the sensor in the desired position without needing to adhere it.
Method 2: Adhesive Mounting
Tear off the adhesive backing and stick the sensor to the desired location.
[Diagram Description: An image shows double-sided adhesive tape being peeled off and applied to the back of the sensor.]
Important Notes:
- Ensure the surface for adhesion is clean and dry.
- To maintain stable wireless communication, avoid installing the sensor on metal surfaces.
Technical Parameters
| Parameter | Value |
|---|---|
| Product Name | Temperature & Humidity Sensor |
| Model | ZSS-S01-TH |
| Wireless Connection | Zigbee |
| Support Low Battery Alarm | Yes |
| Operating Temperature | -10°C ~ +50°C |
| Battery Specifications | CR2032 (replaceable) |
| Temperature Measurement Range | -10°C ~ +60°C |
| Humidity Measurement Range | 0%-99%RH |
| Product Size | 40*26*13mm |
| Frequency Band | 2.405~2.480GHz |
| Maximum Radio Transmit Power | <+10dBm |
Restriction of Hazardous Substances (RoHS)
The following table indicates the presence of hazardous substances in component materials, in accordance with GB/T26572 standard and EU RoHS directives.
| Part Name | Toxic and hazardous substances or elements | |||||
|---|---|---|---|---|---|---|
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Chromium VI (Cr(VI)) | PBB | PBDE | |
| LED | X | |||||
| Circuit Board | X | |||||
| Housings and other components | X | |||||
Note: 'X' indicates that the content of the toxic and hazardous substance in at least one homogeneous material exceeds the limit requirements stipulated in the GB/T26572 standard. Compliance with EU RoHS standards is met due to the absence of alternatives.
Declaration of Conformity
WENZHOU NOVA NEW ENERGY CO.,LTD hereby declares that the radio equipment type ZSS-S01-TH complies with Directive 2014/53/EU, 2014/30/EU, 2011/65/EU. The full text of the EU declaration of conformity is available at: https://www.moestech.com/blogs/news/zss-s01-th
Troubleshooting
If you encounter issues installing or operating your device, please review its product data sheet at: https://www.moestech.com/blogs/news/zss-s01-th
Voice Control
Devices are compatible with Amazon Alexa and Google Home supported functionalities. For a step-by-step guide, please visit: https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker
Warranty Information
Thank you for purchasing a MOES product. The warranty for products listed on the warranty card is granted as follows:
Warranty Terms:
- Products are covered by a 24-month warranty from the date of purchase by a retail customer.
- To exercise warranty rights, present the warranty card and proof of purchase (e.g., VAT invoice, financial receipt).
- For quality issues within 24 months, contact the place of purchase for after-sales maintenance. Personal damage may incur fees.
- Protect the product during transit using original or suitable packaging.
- Defects covered by warranty will be addressed within 14 days of delivery to the guarantor. Repairs typically take no longer than 30 days, but may be extended for hard-to-find parts.
- The warranty does not cover user-performed maintenance or wear and tear.
- The warranty is void if the warranty seal or serial number is removed, unauthorized repairs are performed, or non-original parts are used.
- The warranty does not cover mechanical damage or damage from improper use.
Product Information
Product Name: Temperature & Humidity Sensor
Product Type:
Purchase Date:
Warranty Period:
Dealer Information:
Customer's Name:
Customer Phone:
Customer Address:
Maintenance Records
| Failure Date | Cause Of Issue | Fault Content | Principal |
|---|---|---|---|
Recycling Information
Products marked with the WEEE symbol (Directive 2012/19/EU) must be disposed of separately from household waste. Dispose of this equipment at designated collection points to protect health and the environment. Contact local authorities for information on collection points.
[Diagram Description: The WEEE symbol, a crossed-out wheeled bin, is shown.]
Battery Safety Warnings
WARNING: INGESTION HAZARD
This product contains a button cell battery. Ingestion can cause severe injury or death within 2 hours due to internal chemical burns. Keep new and used batteries out of reach of children. Seek immediate medical attention if a battery is suspected to be swallowed.
- Dispose of used batteries properly according to local regulations. Do not dispose of in household trash or incinerate.
- Battery type: CR2032. Nominal voltage: 3V.
- Do not force discharge, recharge, disassemble, heat above 60°C, or incinerate batteries.
- Ensure batteries are installed correctly with correct polarity.
- Remove batteries from equipment not in use for extended periods.
- Always secure the battery compartment. If it does not close securely, stop using the product.
- Do not mix old and new batteries, or different types/brands of batteries.
Contact Information
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
Authorized EU Representative: AMZLAB GmbH, Laubenhof 23, ESSEN 45326, Germany. Email: info@amz-lab.de, Tel: +491745298066
UK Responsible Person: EVATOST CONSULTING LTD, Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR. Tel: +44-292-1680945, Email: contact@evatmaster.com
Website: www.moes.net
Social Media: MOES.Official, @moes_smart
