Teslong Digital Borescope Camera

Overview

Features

• 7-inch HD IPS Screen
• 180° Image Rotation
• Split Screen View (Dual/Triple Lens models only)
• LED Camera Lights & LED Flashlight
• Detachable Probe
• Supports Wi-Fi Connection
• PD Fast Charging

Applications

• Repair and maintenance of automobiles or diesel engines
• Inspection of hard-to-access or hard-to-see areas or equipment
• Plumbing, construction, and restoration applications
• Scientific education
• Outdoor exploration
• Safety in rescue operations

Safety

WARNING! Please read all safety instructions and guidelines before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Keep the tool dry, clean, and free from oil, water, gas, or other materials that may cause corrosion.
• This device is not intended for use by persons with reduced physical, sensory, or mental capabilities.
• This device is not intended for medical use. Keep bystanders or children away while operating the device.

Maintenance

• Keep the camera lens clean.
• Keep the working area clean.
• Charge the device at least once every 3 months if it is not used for a long time to prevent battery damage.

Technical Specifications

* For more probe/cable options, please visit the official website and shop: Teslong.com.

NOTE: If you need replacement for other components, please contact customer service.

Functions

The device features several controls:

• Cable Connector: Connects the probe cable to the monitor.
• Camera Light Button: Adjusts the brightness of the camera's LED lights.
• Snap Button: Press once to take a photo or start/end video recording. Hold to switch camera view (dual/triple lens models).
• Mode Button: Cycles through Photo, Video Recording, and Album modes.
• UP Button: Navigates up in menus.
• Setting Button: Press once to enter/exit the settings menu. Hold to turn Wi-Fi connection on/off.
• OK Button: Confirms selection, plays/pauses video.
• Down/Rotate Button: Navigates down in menus or rotates the image.
• Power Button: Press and hold to turn the device on/off.
• Type-C Port: For charging and data transfer.
• TF Card Slot: For inserting a micro-SD card.

Additional components include:

• Speaker
• LED Flashlight
• 1/4" Screw Hole: For attaching a metal stand.
• LED Flashlight Button: Controls the rear LED flashlight.
• HDMI Port: For connecting to an external display.
• Microphone
• Reset Button: Used to reset the device if it crashes.
• Metal Stand

Using Your Inspection Camera

1. Remove the plastic screen protector before use.
2. Connect the probe cable to the monitor. Ensure the camera is securely connected to avoid a noisy image on the screen.
3. Power ON/OFF: Press and hold the Power Button to turn the device on.
4. TF Card Usage: The device is equipped with a TF storage card. Ensure it is installed before use.
   • Insert the TF card only when the device is off.
   • Align the TF card correctly when inserting it into the slot.
   • Do not apply excessive force when inserting or removing the TF card.
   • Photos or videos can only be recorded when a TF card is inserted.
   • This device requires a Class 10 high-speed TF card; a low-speed Class 4 card may not function correctly.

LED Indicator Guide

• Device Running: Green LED is lit.
• TF Card Status: Indicates if a TF card is inserted or not.
• Charging (Device On): Green/Orange LED blinks.
• Charging (Device Off): Orange LED is lit.

Modes & Setting

Mode Switching: Press the Mode button (labeled 'M') to switch between three modes: Photo Taking, Video Recording, or Album.

Date/Time: The date and time will be updated according to the system settings.

• Take Photo: Press the Mode button to switch to "Take Photo" mode, then press the Snap button to take a photo.
• Video Recording: Press the Mode button to switch to "Video Recording" mode, then press the Snap button to start recording.
• Switch Camera View (Dual/Triple Lens models only): Hold the Snap button to switch the view between the front camera and side camera.

System Settings

In any mode, press the Setting button twice to enter the system settings menu. Use the UP/DOWN buttons to select options and the OK button to confirm and save changes.

The default language is English. The system supports English, Chinese, German, French, Spanish, Italian, Russian, and Japanese.

Wi-Fi Connection

Displaying Image on Your Phone/Pad/Tablet:

1. Scan the QR code with your phone and download the "Smart Endoscope" app.
2. Activate the device's Wi-Fi in the settings menu.
3. Connect to the device's Wi-Fi network (the host Wi-Fi indicator will blink).
4. Launch the app.
5. Click the '+' button in the app to set up the device and use it with your smartphone.

Please note that photo/video capture is ONLY supported in Wi-Fi mode from your phone/PAD/TABLET (not available from the borescope device itself).

Scan the QR code or enter the activation code printed on the card to remove ads in the app.

Transfer Photo/Video Files to Your Computer

You can transfer files using either:

• Card Reader: Use a TF card reader for direct data transfer.
• Type-C USB Cable: Connect your computer to the device using a Type-C USB cable to transfer files.

Important: Remove the probe camera before using the USB cable.

Charging and Reset

• Please use a USB wall charger that supports PD fast charging and the appropriate cable to charge your device.
• If the device crashes, press the Reset button to restore it.

EU Environmental Protection

Please do not dispose of old electrical appliances with household waste. Recycle them where facilities exist.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC radiation exposure requirements set forth for an uncontrolled environment.

Customer Service

Please contact Teslong if you have any questions about their products. Teslong would love to hear from you.

• Support Email: support@teslong.com | info@teslong.com
• Phone (US): 1-877-899-8809 (Mon-Fri 8:00 AM–5:00 PM PST)
• Website: www.teslong.com
• Social Media: @TeslongInc

Warranty: 12-month Limited Warranty

Technical Support: Lifetime Technical Support